PDA

View Full Version : Total Tool....



Angelo
01-07-2003, 02:45 AM
Iīm having a problem in putting this shit to work, sw detects the dongle ,giveīs the serial number ,until now all ok but when i make read codes appears the messages "trying to turn on phone" and "triyng to enter test mode" and the progress bar keepīs moving until it reaches the end without doing anything.
I have tried with 3 different phones and result is always the same , i have programmed and assembled it according to Davor schemes and hex.
I have some doubts; where do pin 6 from the LPT(phone side) connects to the phone? (pin 1+3 in phone connector or itīs not connected??)
what fuses configuraion did you use and what is the config word and the checksum when you programmed the pic?
If you built it and if itīs working maybe you could give me a help....

thanks for your time

Angelos

hergsm
01-07-2003, 11:21 AM
Hi

See http://nokiafree.org/forums/t30941/s.html

tested with me with TT 155

br

hergsm
01-07-2003, 11:32 AM
for pin 6 of DB 25 i conected to pin 9+11 from phone

or this the cable

Angelo
01-07-2003, 12:36 PM
when i say pin 1+3 i mean 9+11,i was counting for the other side but the result is the same :-(