PDA

View Full Version : easy 3310 -> 3315



thejoker007
11-06-2002, 12:35 AM
Flash This File to your phone From 00200000
Change emei with noktool 1.8
update faid with noktool 1.8
use security code 12345 everytime use switch on

Phone will have 71 ringtones after flash (from nocdoc ppm)

soft ver 5.47

slikmik
11-06-2002, 12:52 AM
What file???

Will it be a 3315 after flashing?

Mike

thejoker007
11-06-2002, 01:20 AM
part 1 of 3 rar files

thejoker007
11-06-2002, 01:23 AM
part 2 of 3

thejoker007
11-06-2002, 01:25 AM
part 3 of 3

slikmik
11-06-2002, 01:44 AM
What addresses to use???
please describe in more detail the use of em - thanks
Mike

thejoker007
11-06-2002, 01:55 AM
If u use Nokia flash tool Which i use the start addr will already be in which is 200000

to use the files , unzip them , then unzip the .rar file and then flash the file to your phone (select 3310 on nokia flash tool )

slikmik
11-06-2002, 02:23 AM
I get the error attached when trying to open the rar in the zip file

any chance you could JUST zip them
cheers
mike

thejoker007
11-06-2002, 02:36 AM
you must unzip all 3 first before trying to extract the fls file

thejoker007
11-06-2002, 04:49 AM
Here is Nokia flash tool

Flash From 200000

thejoker007
11-06-2002, 04:54 AM
noktool 1.8

Change only imei
Update only fade
(don't do SFS) !!!!!!!!!!!!!

sonicdeejay
12-06-2002, 04:31 AM
Can I use 3310 M-Bus cable on 3315? and 3315 is DCt 3 rite..

wfc
12-06-2002, 05:32 AM
if you want it to stop asking for a security code every time you switch it on. go into the phones settings and find the restore factory settings option in the phone. you will still keep all the extra 3315 stuff but it will not ask for a sec code every time you switch it on.:)

thejoker007
13-06-2002, 01:11 AM
Yes you can use 3310 cable and yes it is dct3 !

_Nitro_
13-06-2002, 12:16 PM
I cant connect to the phone with Nokia Tool 18. Anyone how know what the f***** problem is?

xeros
14-06-2002, 07:32 AM
@_Nitro_

Try the 'Auto Setup' option to check the power.
Do You have MBUS cable or F/MBUS ?

treazoNOKIA
14-06-2002, 11:39 PM
auto switching cables don't work with nokia tool 1.8


what did you guys use to join and unpack the 'rar' files?

I already havea 3315 and since this one has more ringtones I wanna try it!

thanks

catwo
15-06-2002, 07:03 AM
I used winRAR, highlight all 3 unzipped rar files (use shift key) then extract as 1 file and away you go.

treazoNOKIA
15-06-2002, 05:30 PM
thanks, i take it it is a full flash backup fls. does anybody have the url for a the winrar program?

catwo
15-06-2002, 06:49 PM
Try here mate http://www.rarlab.com/download.htm

crackhead
16-06-2002, 12:04 AM
i woz wondering if any of u guyz know where i can get full backup of 3315

thankz

crackhead
16-06-2002, 12:11 AM
i woz wondering if any of u guyz know where i can get full backup of 3315

thankz

xeros
16-06-2002, 10:27 AM
@treazoNOKIA

Nokia Tool 1.8 by Rolis works ok with autoswitchable cables.

kimmer911
19-06-2002, 10:41 AM
Originally posted by wfc
if you want it to stop asking for a security code every time you switch it on. go into the phones settings and find the restore factory settings option in the phone. you will still keep all the extra 3315 stuff but it will not ask for a sec code every time you switch it on.:)
Hey MFC... When i try to restore factory settings.. it ask for security code and when i type 12345 it says wrong code....

so... other suggestions ??

_Nitro_
19-06-2002, 11:35 AM
@kimmer911

Try to renew your language pack in your phone. I change my phone to language pack A. After that I have no problem with the security code.

kimmer911
19-06-2002, 01:06 PM
Originally posted by _Nitro_
@kimmer911

Try to renew your language pack in your phone. I change my phone to language pack A. After that I have no problem with the security code.

I Am using PPM A
and it still bugs me with the security shit..

wfc
19-06-2002, 02:34 PM
dont know what you did but here is how i change 3310-3315


** How TO Upgrade 3310 to 3315 **

1. Firstly backup your 3310 using Rolis v4.77, at the very least backup your EEPROM.
2. Flash the 3315.fls file onto the 3310 using Rollis v4.77
3. Connect the phone to a data cable and turn on and using kNok v2.2
- Phone Settings > Change IMEI (restore phones original IMEI)
- Phone Settings > Quick Set FAID
- Modify Locks > Reset SP Lock
4. Insert a SIM, the phone will ask for security code (12345)
5. Go to menu 6 > 4 and restore factory settings, this will stop the phone asking for a security code when turned on :)

its a bit longer than some other methods but it always works for me:)

Kid
19-06-2002, 02:37 PM
Use the NK_Profile to remove the S.Code, do a reset, the functions will still be there. Tested and works 100%.:D

kimmer911
19-06-2002, 07:10 PM
Kid: I will Try that...

and WFC: it dosnt work.. says wrong security code...

welshwizard
19-06-2002, 08:32 PM
go to MY WEBSITE (http://www11.brinkster.com/welshwizard) Click on the 3rd button from the left - mirror 3

Click guides - click '3315 -> 3315 upgrade simple' & follow the instructions

Thanks :)

User32
21-06-2002, 01:47 AM
What more does the 3315 have from 3310?:confused:

welshwizard
23-06-2002, 01:30 AM
@ USER 32

EXTRA FEATURES STATED @ MY SITE - IN GUIDES SECTION

nokia_lite
25-06-2002, 06:38 AM
hi peeps i just register myself here 'cause i love this forum and it mean so good for me, especially for thejoker007 :) thanks so much to you friend that i have made my 3310 to 3315 ... i make you as my referrer when i register here.

Thanks again thejoker007



nokia_lite

rheny
29-06-2002, 12:58 PM
hi guys

Ive tried flashing 3315w71tone but of no success.

When you switch on the phone it say "insert sim card"

But when I flashed back the origal file to the phone it shows
normal


rheny

Icedude
01-07-2002, 06:39 PM
maybe that the 3315 doesnt work in your part of the world :( :)

welshwizard
01-07-2002, 07:42 PM
try unlocking the phone......?

eeprom tools 3.1 - click padlock then magifiyer.

martinzaloudek
03-07-2002, 09:08 AM
3315 is same as 3310. There is only one diference.....30th bit in EEPROM. If 30th bit is 0 that phone has function as 3310.
If this bit has value 1 that phone has function as 3315.

If you have 3310 with version 5.45 or high, just chance 30th bit.
You can do it by PCLocal.

So you doesn't need any special flashes for 3315. You need flash file for 3310 v5.45 or high.

It is there: http://www.gsmunlock.sk/members/bRAd/
uses/pass is "gsm".

Redje2000
09-07-2002, 03:10 AM
When i'm phoning with my updated 3310 (now 3315), the quality of the sound is not so good as it was??

Has anybody a solution for this problem??

Greetz and thx

snbmf
28-07-2002, 03:26 PM
The ring tones is not sort properly......

jazzyjeff016
03-09-2002, 02:23 AM
hello im a newbie here...
I just wanna ask if i can use my data cable (i mean the one, im using for my logomanger). to upgrade my 3310....

and about the (3315 w71tone3.zip) can i use this as a fls file to upgrade my 3310 into 3315?

thankx! =)

rom65
03-09-2002, 02:54 AM
No you can't , you'll need a flasher cable which is different from you data cable.


You'll need all the three files posted by thejoker.

ihav3hands
03-09-2002, 05:19 AM
good day jazzyjeff! welcome to the club! i'm new to this stuff too but i have a thread where rom65 is there too! you will understand a bit more about your inqueries coz i have that same question yesterday but i think i know the answers already. just go to "Diff. bet. Data and Flash Cable / Convert Data cable to flash,
possible?"

jazzyjeff016
03-09-2002, 03:47 PM
hmm.. tnx for the reply..

though i just cant figure still about the diagram.
anyone there who have a pic of a "converted data cable to flash cable"

geesh so much for me as an EE student...:(
thanx guys!

rom65
03-09-2002, 06:28 PM
visit these threads jazzy...http://nokiafree.org/forums/t5617/s.html


http://nokiafree.org/forums/t4847/s.html

EricLoh
09-09-2002, 09:04 AM
can i know how can i upgrade my nokia 3310 to 3315 have 71 ringtone can any 1 send it to me at [email protected] 12 normal blue

Sunshine
09-09-2002, 02:33 PM
rite, i've got all the stuff, but the flasher dont work in XP, is there anything i can do bar formating my hard drive and puting 9x on?

altoair66
09-09-2002, 07:58 PM
hi,

ppls, flashed 3310 succesfuly,it is now3315 but most of the ring tons played twice with different title,there r few new tones.it does not look good without start up and shut down tones.:D :grin: :D :)

krislove99
15-10-2002, 11:08 PM
i upgraded my 3310 to 3315 or so i think. i am getting the 71 ringtones but none of the other features ie:
Picture message/Clipart editor menu
Timed automatic keylock
Timed profiles
Mass SMS eraser
'Personal' option for SMS alerts

can anyone help me?
thanks

GanZa
16-10-2002, 07:31 PM
Hi.. Can some of you send me the language pack a for 3315 to [email protected] ?

GanZa
17-10-2002, 07:47 AM
I have upgraded my 3310-3315 with 71 ringtones.. And i have these functions extra.

Picture message/Clipart editor menu
SMS personal Tone

Not Those:
Timed automatic keylock
Timed profiles
Mass SMS eraser

Can somebody send me a Full 3315 Flash with 71 ringtones and MCU V5.57 That works 100% I have the PPM pack.. Send it to [email protected]

Thanks:D

Evil Neo
18-10-2002, 01:16 AM
just download this program and useing mbus click on 3310 >>3315

but your softwer ver must be above 5.47

krislove99
18-10-2002, 12:28 PM
i have figured out how to upgrade to 3315 and i now have a fully working 3315 with all extra features. if u need a walk through add me to your msn messenger list or email me and i will help you.
this is where all the extra features are:

Picture message/Clipart editor: Menu - 13
SMS personal Tone: Menu - 5 - 5 - 6
Timed automatic keylock: Menu - 6 - 5
Timed profiles: Menu - 12 and then choose the profile you want select "Timed" and set the time for it to start.
Mass SMS eraser: Menu - 2 - 11 and choose which box you want to erase all of.

ReaperXP
23-10-2002, 02:28 PM
I have an F/MBUS cable, will it still work?

tarooka_vip
23-10-2002, 06:19 PM
I have an F/MBUS cable, will it still work?

Yes u can use it , it is work correctly...

FARID SHAWKY
24-10-2002, 12:05 AM
threr is program convert 3310 to 3315 and it is very easy it name
pclocal

nonu_don
22-01-2003, 07:41 PM
i have 3310 5.03, look what i did to make it 3315

flashed it with 5.79
updaited faid
phone working all correct.
opened 3310ugrd145 and plugged my mbus cable

when i click convert 3310 to 3315 it says
"Incorrect phone detected for upgrade, only 3310 or 3315 are allowed!"

and resets the s/w.

but it worked when i flashed my phone with 5.47
verify this


Naman

devolution
23-01-2003, 02:17 AM
get pclocals, restart your comp in dos mode and open pclocals read the product profiles and change produck profile bit 30 from a one to a zero press F2 to save the changes to your eeprom. Oh and you need v5.50 or higher first I beleave. and you use your mbus for this pc locals procedure, I did it and works every time I used v5.57.

gsmtech-SK
23-01-2003, 10:27 AM
Use KNOK22 and it works perfecly..