PDA

View Full Version : 6210 plate swap



BizzyRok
16-06-2002, 11:35 PM
I was wondering since I cant fix my 6210 (which dont switch on) if i swap the plate of my 6210 with a working one and take the swapped one to a one2one shop would they know that I swapped it. Also would they have to replace it because they will thimk that it is under a line rental contract and it suddenly fucked up?

BizzyRok
17-06-2002, 03:50 PM
Someone please tell me if this will work

cprafferty
17-06-2002, 07:27 PM
Yes and No yes your phone would work but you would need to change the IMEI numbers on both "plates" (correct term PCB) and as your one is not working they would see after fixing it that its not the same phone

BizzyRok
17-06-2002, 11:40 PM
is there a way I can fix it. And if so what programs will I need?

cprafferty
18-06-2002, 01:26 AM
Right you will need

a flasher cable (thats the one that goes into the printer port)
an Mbus cable (thats the one that goes into the serial port)

a copy of Knok
a copy of Nokia Tool by rolis version 1.8

a flash file from wnite.cjb.net or gengheraenga.net pack E or C
and the virgin eeprom

connect flasher cable to the phone and PC

open Knok

select phone model (6210)

select write and write FLS file to phone

select the virgin eeprom file you downloaded and start from address 005A0000

follow the instrutions on the screen

select phone model (6210)

select write and write FLS file to phone

select the flash file you downloaded and start from address 00200000

disconect the phone and re-connect the phone with the MBUS cable

turn the phone on (if it doesn't turn on repeat the steps until it does)

select phone settings and set new imei

type in the imei number from the sticker on the back of the phone

if this is successfull select phone settings and quick set faid

close Knok

open Nokia Tool by rolis

click read

click open all

click clear SP locks

the phone should now be working again

cprafferty
18-06-2002, 01:29 AM
that should be all if not drop you a note and i will try to help

BizzyRok
18-06-2002, 02:06 PM
THANKS for the reply! But I am at college now but I will try it when I get home.

BizzyRok
19-06-2002, 02:14 AM
Do those programs work on Windows XP?

cprafferty
19-06-2002, 03:19 AM
yes they should do if not

look here for more info

Click Here (http://nokiafree.org/forums/t3255/s.html)

BizzyRok
22-06-2002, 11:52 PM
THANKS CPRAFFERTY!!!!!! I did what you said and my phone works again.

cprafferty
23-06-2002, 10:15 PM
Thats ok its easy when you know how

BTW what software version is your phone now

(*#0000#)

its the first line

BizzyRok
24-06-2002, 12:42 AM
I converted my 6210 to a 6250. But when I fixed it was V05.56 my 6250 now is V 05.03

Anyway Thanks Again:D