byteforce
11-07-2003, 06:12 PM
Hi
I will present here my solution for A50 testpoint which works perfectly 10000% without any damage to the phone.
1. First we solder a thin wire to our existing Siemens datacable at pin 1.
2. The other end of the wire we let free, until we finish the steps 3 and 4.
3. Then we buy a needle, possibly greater than sewing-machine needles (about 5 to 7 cm long).
4. After that we build a small wood handle and after this we drill this handle and insert the end of needle (not the tip) into this hole unitl is is tight into place.
5. Now we connect the other end of the thin wire that we soldered into PIN 1 into the needle (we only need to rotate the wire one or two times around the needle at any place where it doesn't frustrate us)
6. Now we only drive the needle that we just built under the button 1 of the phone (for this you must take a look at the Martech software cracked photos for precision driving) ad that's all, now we are ready to go with the Yazdanfar software, first we press the button Read EE and if it is successful we go with the button Unlock and in 2 seconds your phone is free like a bird. (if the Read EE is unsuccessful we must sprain the needle until it succeds).
I will present here my solution for A50 testpoint which works perfectly 10000% without any damage to the phone.
1. First we solder a thin wire to our existing Siemens datacable at pin 1.
2. The other end of the wire we let free, until we finish the steps 3 and 4.
3. Then we buy a needle, possibly greater than sewing-machine needles (about 5 to 7 cm long).
4. After that we build a small wood handle and after this we drill this handle and insert the end of needle (not the tip) into this hole unitl is is tight into place.
5. Now we connect the other end of the thin wire that we soldered into PIN 1 into the needle (we only need to rotate the wire one or two times around the needle at any place where it doesn't frustrate us)
6. Now we only drive the needle that we just built under the button 1 of the phone (for this you must take a look at the Martech software cracked photos for precision driving) ad that's all, now we are ready to go with the Yazdanfar software, first we press the button Read EE and if it is successful we go with the button Unlock and in 2 seconds your phone is free like a bird. (if the Read EE is unsuccessful we must sprain the needle until it succeds).