calikmurat
14-07-2003, 06:43 PM
Hi
i have got 4 not working silver sim card
now im telling how i made them unworking ;
1st card :
when loading simemu 5.0 to card with multiprogrammer , i forgot to set the programmer to 3.5 mhz
after programming, in phone it asked fro pin, but didint accept 1111 as default pin i tried 0000 and 1234 and disabled pin and puk after 10 tries :(
2nd card :
i didint forget to set the programmer to 3.5 mhz , i programmed card , it was working ,i loaded 2 lines to it , then i wanted to delete these lines, i tried from simemu menu , but it didnt work , it restartedc phone too many times , but lines were NOT deleted :( so i erased sim card with programmer again an loaded flash file and eeprom file again with programmer, now phone says to this sim card please insert sim card :(
3rd card :
i was using cardwriter 1.87 program it was all the time telling me to set my programmer to ludi mode mode 2 , but i wasnt changing the mode it used to give an error while programming but after programming sim card used to work properly. one day when programming an silver card , cardwriter 1.87 again told me to set mode 2 ludi mode , i set it to ludi mode and programmed card, it didint give an error.. buttt sim card didint workkkk :(((
4th card:
the same , i forgot to set to mouse mode 3.57 mhz
so someone please tell me to reprogram these cards and use the m.... how will i do ???
i have got 4 not working silver sim card
now im telling how i made them unworking ;
1st card :
when loading simemu 5.0 to card with multiprogrammer , i forgot to set the programmer to 3.5 mhz
after programming, in phone it asked fro pin, but didint accept 1111 as default pin i tried 0000 and 1234 and disabled pin and puk after 10 tries :(
2nd card :
i didint forget to set the programmer to 3.5 mhz , i programmed card , it was working ,i loaded 2 lines to it , then i wanted to delete these lines, i tried from simemu menu , but it didnt work , it restartedc phone too many times , but lines were NOT deleted :( so i erased sim card with programmer again an loaded flash file and eeprom file again with programmer, now phone says to this sim card please insert sim card :(
3rd card :
i was using cardwriter 1.87 program it was all the time telling me to set my programmer to ludi mode mode 2 , but i wasnt changing the mode it used to give an error while programming but after programming sim card used to work properly. one day when programming an silver card , cardwriter 1.87 again told me to set mode 2 ludi mode , i set it to ludi mode and programmed card, it didint give an error.. buttt sim card didint workkkk :(((
4th card:
the same , i forgot to set to mouse mode 3.57 mhz
so someone please tell me to reprogram these cards and use the m.... how will i do ???