PDA

View Full Version : 8210 ugent help


mexusbg
18-07-2003, 10:53 PM
Well, i got a girlfriend of mine 8210.
It was rom6 and i flashed it with 8250 PPM and MCU.
Then virgin EEPROM!
The problem is that some of the profiles look like this (^&%#$#),
there are no pictures, when you enter the screensaver menu the phone hangs!
Whan you go to tones menu black screen, when pressing any key tones apear but u cannot hear them!
How can I fix this?????
It's very urgent!!!!
numeric
19-07-2003, 06:22 AM
try flash it with 8250 full flash...
Romeo26222
19-07-2003, 07:00 AM
Please after flashing you phone RESET FACTORY SETTINGS by usin Knok or nokiatools by Rolis
wwanthony
19-07-2003, 08:21 PM
Hi,
Get the latest 8250 mcu and ppm from here:
http://www.gsm-funworld.de/nokia/8250.html

load the mcu then ppm with Rolis flasher and click the Up Arrow.
File -> save as mcu-ppm.fls

Now get the 8250 virgin eeprom from here:
http://www.gsm-funworld.de/nokia/files/virgineeproms.zip

Now rename the virgin eeprom to eeprom.fls and make sure it is in the same folder as the mcu-ppm.fls.

Now hit your start button and click Run.
type command and click OK.

browse to the folder where the mcu-ppm.fls and the eeprom.fls are with msdos prompt (if it does not already show the correct location in the newly opened msdos window)

Then type the following:
copy /b mcu-ppm.fls+eeprom.fls fullflash.fls

You now have an 8250 fullflash which you can flash to your phone. Then change the IMEI to your original, Clear the SP locks, Update FAID, Reset User Interface Settings with KnoK then Quick Set FAID :)
mexusbg
20-07-2003, 09:55 PM
I flashed another phone, the same way, it works great!
I reset factory settings and all stuff
wwanthony
21-07-2003, 09:59 AM
When flashing with seperate mcu and ppm then eeprom sometimes theres an error but using the method above, combining to a fullflash, I havnt had one error yet ;)

I actually tried posting the fullflash for you many times but it wouldnt let me upload it, thats why I just posted the method.

I'm actually using the fullflash as created above in my 8210,
just fading led's aswell ;)
Would like to put a Sec code in messages but flsedit v0.4 by joox (edited by eleoson) doesnt support the 8250 v6.04 :(