nokia 8210 contact service need help for flashing

[SEDUSA]

well , ivé here a 8210 from a friend and he flashed the phone to be an 8250 but didn´t work and phone was dead , now is in contact service , but need help for repairing all phone information ,(need help to replace again the software on the phone) .can you tell me any sites to find software , 8210 flashfiles to repair it , instructions , and the soft to do it too. urgent help please

stay cool thanx a lot

[chunkhead]

Please use the search button and my guide to Contact Service repair is in the Forum FAQ!;)

[sergo_zmeia]

Do You have a back up file..if so flash it back...than run nok tool by rolis and if it said rom 6 /type of the mad2w...You just have to find a working flash ...if it sais rom 5 You cant upgrade to 8850..
Regards!
Sergo_Zmeia

[SEDUSA]

were can i find a full 8850 flash file or 8210 full flash file because my friend did not make first the full backup of his 8210 phone now i need to re-insert a new software into the phone to he works again need help in this matter ok thanx for help folks stay cool

ps- where can i find the best soft for flashing??

[sergo_zmeia]

Check download section...or www.freegsm.biz
Regards!
Sergo_Zmeia

[SEDUSA]

HI , iv´e downloaded the flash file and flashed to the phone but the phone still sayng contact service , i think i will try another think like make a full flash of other 8210 and replace it in the 8210 of my pell witch is in contact service , you folks what do you say??? maybe will work ?????can i do this in last choise ????
i don´t no what to do more but i will still searching , never lose hope ok stay cool and thanx folks :D

[wai3000]

what software are you using to flash your phone?

[SEDUSA]

i´m using nokia dtc3 flasher by rolis v4.77 , i think this is the writhg soft , i´m making menu flash , option write , open flash file then flash it , but when flash is writed the phone says contact service ok thanx stay cool

[chunkhead]

Am I just wallpaper in this forum??? I told you already to use my guide in the Forum FAQ! If your phone still says "Contact Service" then post the results of the Eeprom tools test here!!!:o

[SEDUSA]

here it goes ....

mcurom checsum-not executed

mcu ram interface-passed

mcu ram component-not executed

mcu eeproom interface - failed

mcu eeproom component - not executed

rtc battery - not executed

ccont interface - passed

a/d converter - not executed

sw reset - not executed

power off - not executed

security data - passed

eproom tune checksum - failed

ppm checksum - not executed

mcu downloaded dsp - passed

dsp alive - passed

cobba serial - passed

cobba paralel - passed

eeproom sec checksum- passed

ppm validity - passed

warranty state - passed

sw version - passed

ok thanx stay cool

[chunkhead]

Now we're getting somewhere! The tests failed because the eeprom is corrupted! Flash a virgin eeprom to the phone! Use my Rolis Flashing tutorial in the FAQ to show you how! All should be well!

[SEDUSA]

ok thanx i will notice something ok stay cool and thanx again

[SEDUSA]

uhhhhh....something it´s wrong ....or i making it wrong...

the phone still´s in contact service i think i need a full flash file with around 4 or 5 mb of information .
i´ve seen your faq & step 10 and 6 i think, i made like it says but stiil in contact service , where can i find such flash file????
the problem it´s that my friend did not make his own backup of his 8210 phone so now i cannot restaure all phone information , if he had make the backup it gonna be more easy , well thanx a lot , more sugestions stay cool

[Sandy Boston]

You can download a full backup file (they are 2mb in size) from here:

www.nokia-flash.tk

I have downloaded the 8210 full backup file - they're referred to as Fubu's and this file works perfectly. I had the same problem ie. contact service and I tried many, many different files. The full backup is probably your best option.

Cheers :D

[SEDUSA]

thanx a lot the phone now starts , he can charge batery but when i lunch nokia tool by jordik , or eeproom tools the phone can´t be readed , i cant read information of the phone , because i need to set imei , faid the phone , unlock it , etc... what can i do to solve this problem now and the language is in german not in english

need help to finish job

thanx a lot for all ppl wich help me nokia in advance stay cool

[chunkhead]

Use the Knok95 unlocking guide in the Forum FAQ! Set the imei to the one under yor battery!;)

[SEDUSA]

i still not getting the information of the phone so i cannot fix/set imei , any softs that iv´e used can´t read the phone , i cannot set faid and reset user interface settings

what sould i do now any more sugestions ????

ok thanx stay cool

[SEDUSA]

iv´e used too an fbus soft to try read phone information but didnt work any more sugestions ??ok thanx stay cool

[chunkhead]

Are you using XP? You need to use 98SE! Make sure your correct com port is selected! Use Noktools and click on the ladybug! This will auto-detect the phone! Make sure your phone is ON!;)

[SEDUSA]

i ´m using win milenium portuguese version not xp , and when i trie to read always failed read and when i make an auto search of the phone he says mbus error or cant initialyse in local mode, can i put in test mode maybe can work , have any soft to do that ???, well thanx for your reply stay cool hugs

[Sandy Boston]

Does the cable work OK and do you have the right COM port selected? Just a thought, anyway.

[SEDUSA]

i ´m not shore but i think i have somekind of problem with my com 1 and now with com 2 , i have to waith for my portatil pc wich went for maintenance , upgrade and repair , just wait for checking if my desk pc have any problem with com´s.
well wen i tested or checked pc com problem will post somthing if reading phone works ok stay cool hugs and thanx

[SEDUSA]

well has i though i dont have any problem with com or pc , ive tested in other pc and soft cannot read phone , now i need to restore/reinsert original imei but cannot get acess to the phone
after flash the phone with fubus file i can insert the sim and appears the logo of network vodafone then it disapears and i cannot make calls the bars of network in phone dont appear signal , the phone dont have original imei, have another one , maybe the problem its because dont have original imei ????
and phone dont gets network signal????please help stay cool and thanx

[SEDUSA]

well ppl i´ve solved the problem i have the phone now working perfectly 100% , well i just want to thanx to all pll who suggest how to resolve this problem/helping me many thanks to them i appreciated the help stay cool hugs to everyone

so one more time thanx stay cool

thread closed.......

p.s-thanx guys nokia in advance:D

[sergo_zmeia]

Post the desition please....
Regards!
Sergo_Zmeia

[chunkhead]

Yeah, hello!??? How did you fix it?:(

[SEDUSA]

its so simple any soft didnt worked with my phone , so i just flashed the phone with fubus flash file modded but with a version 5.25 , soft rolis and epproom tool did not work , ive used nokia tool by jordik and it reads but i cannot change imei and use special factory settings so ive upgraded the version 5.31 protuguese ppm/mcu file to phone and i was able to set imei , special settings and unlock but i only can do that pressing the button make all , and it works, in the manual way the phone stayed in same, a litlle weird but it works

it was a try and thanx to god it works , using indications faq the phone did was not able to get network ....

i still making questions to myself of how it works ????

well thanx to all ppl who help me thanx a lot stay cool hugs