3510i codes

[michael.pratt]

Please can you generate codes for me please, i have tried a code gen downloaded from net on a orange 3510 and it worked first code,however i tried it on virgin network 3510i and it would not kept displaying cannot remove restrictions.... can you help imei is 351476804416656 Virgin network dont have network number sorry i tried t-mobile as b4 but no good please help thanks mikep. :(

[MrWolfman]

have u treid to enter a code 5 times on the 3510i yet?
if u have its now cable locked
if not try this code

#pw+433047266102040+7#

it maybe the same as u generated
if so then u need to get bwinlock and a cable to get the new network code for this phone

[michael.pratt]

Thanks i tried the code but no good.Keeps displaying cannot remove restrictions just what exactly have i got to do and where do i get the gear from im fairly new to this and didnt know about 5 entries and it messes the phone up does it just need a new network code ? thanks mikep.:(

[MrWolfman]

have u had 5 tries at entering a code yet?

[michael.pratt]

Sorry but i have entered codes at least twice that what now ? Thanks mikep:(

[MrWolfman]

the network code for your phone is not the standard one
u need to get a cable and bwinlock to get the new network code

[michael.pratt]

Thanks. What is bwinlock and where can i get it ? could i get the code using logomanager ? still learning !!! Thanks mike p.:confused:

[MrWolfman]

datacable (no usb) and bwinlock from www.b-phreaks.co.uk

logomanager no as it uses its own built in mcc codes

[michael.pratt]

Thanks most appreciated,have downloaded bwinlock BUT get error message cannot read phone info (or similar). I am using a laptop with usb ports but use a conversion cable for the 16 pin connector works with logo manager and some other progs not all though. What is the difference between fbus and mbus ? many thanks. mikep.:(

[MrWolfman]

serial cable not usb

[gsm community]

Originally posted by michael.pratt
Thanks most appreciated,have downloaded bwinlock BUT get error message cannot read phone info (or similar). I am using a laptop with usb ports but use a conversion cable for the 16 pin connector works with logo manager and some other progs not all though. What is the difference between fbus and mbus ? many thanks. mikep.:(

try to play with options in bwinlock (DTS RTS ON/Off - 4 possibilities)

[michael.pratt]

Thanks again for all the help youve given me.Idownloaded bwinlock used it on serial (win98.) The phone id works,the handset goes into test mode but when i press the padlock it comes back unable to calculate what is wrong need help.thanks again mikep.:(

[gsm community]

Originally posted by michael.pratt
Thanks again for all the help youve given me.Idownloaded bwinlock used it on serial (win98.) The phone id works,the handset goes into test mode but when i press the padlock it comes back unable to calculate what is wrong need help.thanks again mikep.:(

padlock will not work without dongle, you just can read out config key, please post this (complete length)

how many wrong tries are displayed by bwinlock?

[michael.pratt]

Thanks for reply,what is meant by dongl ? The following was displayed 2340000100000000 .. 5 is displayed failed attempts. whats this all about ? many thanks. mikep.:confused:

[gsm community]

sorry you will need to find someone with griffin box or bwinlock with dongle as you had 5 wrong tries

[michael.pratt]

Thanks for speedy reply. As the phone is virgin who supply unlock code if you have £30 credit ,will that still be possible with code from virgin ? thanks mikep.:confused:

[MrWolfman]

no u only get 5 tries for remote unlock no matter whos codes u use
needs cable unlock now

[michael.pratt]

Although i havent had much success so far through pilot error i would just like to say THANKS to all invoved in trying to help me it is much appreciated.Many thanks.Mikep.:)

[gsm community]

reason for wrong codes was wrong IMEI

351476/80/ was wrong, it has to be 351477/80

I computed back last check digit

[michael.pratt]

I have checked imei it is 351476804416656. I believe the reason for the wrong codes was that when i calculated i used the network code for t-mobile ( 1 2 1) instead of virgin which i didnt know because it wasnt on the list in the code generator and i thought it was the same network (i know different now). thanks again. mikep.

[gsm community]

that can't be because for the imei with 351476/80 check digit has to be 7 (last digit)

addition

etsi.org could gave changed algo for check digit, you may be right, sorry

[michael.pratt]

Thanks,but to be honest as a newbie i didnt realy know what you were on about (no offence intended) thanks.mikep.:confused: