Flash Cable Pinouts Connection

[epoc]

Hello

I found very cool the idea of making my own
Flash Cable using the schematics provided in this site
since No ONE sells them in Greece!

The cable is based on 74HC04 (by Dejan) and has 6 exits:
RX,TX,GND,MBUS,BTEMP,VPP.

OK so far, but how am I supposed to connect them to
my NOKIA 8210? The communication interface of 8210 has
5 pins.

Where should I connect each exit of the cable,
especially BTEMP & VPP?

Please help me guys coz I've messed it up!!!
I would appreciate any idea.

_________________________________________
P.S: Thank's for the help in Contact Service

[sergo_zmeia]

Check this: www.nokiafree.org/forums/t34842/s.html
the attachment in the replay..
Regards!
Sergo_Zmeia

[epoc]

Thanx man!

So you mean that I can use the f/mbus cable as
an extension of the Flash cable to connect it to my phone?:confused:

I already have a F/MBUS cable, will it work if connected to
flash cable and set to MBUS (using the switch)?

P.S:The main purpose is to flash a new MCU , PPM and EEprom file due to that stupid Contact Service message it displays

[sergo_zmeia]

The idea is that if You have a flasher cable You can use the heads with the schematic that i post...You cant flash the phone via Mbus
....
Regards!
Sergo_Zmeia