PDA

View Full Version : Help unlocking 3650 please?



crzysheeit
31-07-2003, 09:51 PM
my imei# is:

351102502462269
t-mobile usa - chicago area

Thanks.

gsm community
31-07-2003, 09:52 PM
Originally posted by crzysheeit
my imei# is:

351102502462269
t-mobile usa - chicago area

Thanks.

try this code #pw+939942562731447+1# only once and post results

please remove simcard before entering code

MrWolfman
31-07-2003, 09:52 PM
#pw+939942562731447+1#

try first post results deleted other thread

MrWolfman
31-07-2003, 09:53 PM
:p

newbie
31-07-2003, 10:02 PM
Please help . I need a unlock code for 3650, T-mobile , GA
IMEI # 351102501484546
I tried 3 times already but still not work ... please help

crzysheeit
31-07-2003, 10:02 PM
Well...my phone turned on..and i made a call successfully...other than that...if it acts up later on i guess im screwed right?

But if it is good to go..then thanks alot. i appreciate it.

MrWolfman
31-07-2003, 10:06 PM
yes it should be fine never had a screwed one come back yet

gsm community
31-07-2003, 10:24 PM
Originally posted by newbie
Please help . I need a unlock code for 3650, T-mobile , GA
IMEI # 351102501484546
I tried 3 times already but still not work ... please help

#pw+815861444320761+1#

try this

newbie
31-07-2003, 10:38 PM
How can you do it ? It works finally ...
How come my DCT4 calculator didn't work ? Can you share ? ...
Hey , Dude. ... Thank you so much

gsm community
31-07-2003, 10:42 PM
Originally posted by newbie
How can you do it ? It works finally ...
How come my DCT4 calculator didn't work ? Can you share ? ...
Hey , Dude. ... Thank you so much

configuration key is 31020 even if the network code in your area is another one.

you must use this value to calculate

give your calculator a try and you will see that code is equal mine

config key and network key could be the same, usually here in Europe, but not in the US as there are many different network codes due to the fact that there were many mergers and aquisitions

newbie
01-08-2003, 07:29 PM
Great, Thank you

J.C
01-08-2003, 08:00 PM
Why can't I press the last "#" key when I am entering the codes??

Tr0LL
01-08-2003, 09:59 PM
Can someone help me get the unlock code for my Nokia 3600?

IMEI # is 010187000022155

Provider is Cingular (Southern California)

I have tried this

DCT4NCK by jozso v0.0a
----------------------
IMEI is '010187000022155'
ASIC Type is 5
Provider is '31017'
Box serial is '32820'

#pw+087353505545153+1#

but it did not work. I have also tried subtracting 1 from the 2nd digit as I read in another post and it also did not work. I have 3 tries left. Can someone help?

MrWolfman
01-08-2003, 10:11 PM
the code is a v1 code but should work fine i would have thought

i wont post you another code yet and dont enter anymore codes
there are one or two or 3 4 lol people who know there stuff more than i do
wait a little while and take there advice
one person in particular to look out for is gsm community
just hold tight and await there answer

gsm community
01-08-2003, 11:17 PM
Originally posted by Tr0LL
Can someone help me get the unlock code for my Nokia 3600?

IMEI # is 010187000022155

Provider is Cingular (Southern California)

I have tried this

DCT4NCK by jozso v0.0a
----------------------
IMEI is '010187000022155'
ASIC Type is 5
Provider is '31017'
Box serial is '32820'

#pw+087353505545153+1#

but it did not work. I have also tried subtracting 1 from the 2nd digit as I read in another post and it also did not work. I have 3 tries left. Can someone help?

as 3600 is a very new phone algo and config key might have changed.

your code calculation was right, we could try code number seven, too

but I advice to you to read out config key with datacable (no usb) and bwinlock first, so that we know this value at least look on ebay fopr "datacable" and "3650"

and DON'T enter any code until clarification by bwinlock!

gsm community
01-08-2003, 11:30 PM
are you sure, that phone is simlocked as th new 6100 from cingulat are not?

did you try a foreign simcard like t-mobile or att?

what does phone say after entering pin code?

Tr0LL
03-08-2003, 04:02 AM
hehe, cool, it's not even locked...

i just tried it.

it said code error before.....