alans72
09-07-2002, 01:03 AM
Hello everyone, first of all i must say that i saw that everyone here is wonderfull for the long help posts that i see everywhere, this is the kind of forums that really help the spread of the human knowledge. Well lets start saying i'm cuban and i live in Havana, here anybody has the smallest idea of how to unlock cellular phones, even more, the cellular service here started just 3 years ago and GSM even worse, 6 moths ago. Here in Cuba the private use of the internet is highly pubnished, so i'm a sort of hacker jeje, student of telecommunications engineering. Well you must imagine that here we can not even buy any electronic parts or hardware so i have to be ripping any old boards jeje, So lets go to the point. I have bought a stolen 7110 GSM sw 4.94 NSE-5 and initially it was having just Locks 1 and 4 closed , but as you can imagine i have built my own FBUS/MBUS cable with success and after testing lots of programs as a typical newbie , I LOCKED ALL 4 LOCKS, and i have not found any way to unlock them anymore with that cable and any combination of softwares like Nokiatool, CyberPhreak Unlocker, Nokia All, etc etc etc...So i think the only way is to flash the phone, i have downloaded the last Dejan Flasher Release and the appropiated Partial and Full flashes , also i got WINDLS 3.5 from here and the crack installing it successfully under Windows ME, now here go my questions, i have made my own Dejan Cable with the schematic attached here.
1. I could not get the 74HC14 Smith Trigger Inverter , so i used 74HC04 common inverter (will it work ???) i have rad that for digital appliances it works the same.
2. I did not connected the BTEMP and Vpp cables so it said only needed for 3210 (and i dont have the connector to the phone so i soldered the wires directly under the battery)
3. The cable does not work, so i checked the 74HC04 power supply that must be 5V through pin 3 and 5 of the LPT port
CAN SOMEBODY TELL ME WHAT CAN BE WRONG HERE PLEASE???
I have tried to read phone data with WINDLS and it says Phone communication error, and a Boot error with Dejan Flasher, so its clear that the cable is not working, please help me. Thanks to all of you !! ..and excuse my bad english ;)
1. I could not get the 74HC14 Smith Trigger Inverter , so i used 74HC04 common inverter (will it work ???) i have rad that for digital appliances it works the same.
2. I did not connected the BTEMP and Vpp cables so it said only needed for 3210 (and i dont have the connector to the phone so i soldered the wires directly under the battery)
3. The cable does not work, so i checked the 74HC04 power supply that must be 5V through pin 3 and 5 of the LPT port
CAN SOMEBODY TELL ME WHAT CAN BE WRONG HERE PLEASE???
I have tried to read phone data with WINDLS and it says Phone communication error, and a Boot error with Dejan Flasher, so its clear that the cable is not working, please help me. Thanks to all of you !! ..and excuse my bad english ;)