add personal sms alert tone (3210 v6.00)

[kristoffer]

i have my nokia 3210 version 6.00, i want to add 30 more ringtones and add a personal message alert tone. is it possible? can anyone help me with it (software and guide)? thanks

[treng]

i think the adding 10 ringtone is the safest for 3210. about message alert tone you can't add but you can change it.
for adding ringtones you can use ppm manager or ringtone manager.
for the message alert tone you can use flashtone but they say its buggy.

hope this helps!

[kristoffer]

you mean i cant add the PERSONAL MESSAGE ALERT TONE? ohhh...
pls help me with that... whats the site and the procedure to do it....aside from standard, special, ascending, beep once, no tone... i want to have a new menu there and its the personal alert tone and adding a ringtone.... thanks hope you can help me

[treng]

you can't add personal message alert tone. you can just replace the ascending and special, flashtone can do that. you can download flashtone 2.05 crack just try to search for it.

procedures:
1. Click on FILE/OPEN FLASH FILE
2. Specify the FULL flash you are using.
NOTE: Use the full MCU/PPM pack and do not include the PMM and EEPROM.
3. Select MODE (Alert or Ring tone)
4. Click on FILE/OPEN TONE FILE
5. Select the RTTL/RTX file you are using to change/insert into
your flash.
6. Select the tone you want to change and click
the CHANGE button or INSERT button.
NOTE:Insert does not work on the Alert Tone Mode because it is not
allowed by the Nokia programming.
7. You may repeat 3 to 6 for additional tones to be changed or inserted.
8. When done, select FILE/SAVE FLASH FILE AS and save the full flash
into a different filename.
9. Run a flasher program and flash the modified flash into your phone.
10. Update the FAID by using a BPhreaks logger or Koci logger to
generate a log file.
You may also use the FAID recalc by MBUS of Rolis or the
Dejan box 1.02 or higher.
NOTE:Your phone will not find network if you only use NK_CALC or
Roli's or EEPROM Tools.

Changing the Alert Tones on units like 6210, 6250 and 7110 should
be done on the Change Ring Tone Mode, because alert tones on these
units are actually stored in the PPM pack unlike the others, alert
tones are stored in the MCU part. But still, the displayed Alert
tone names will still be displayed in its default names because
the MCU assigned these names to them and not taken from the PPM.

When using flash from 3310, make sure the address read from the phone
is 200000 to 3D0000 only, or else you will get a "Contact Service"
error when flashed back to the phone.

Also, when using modifying flashes of 3310, use only version 4.xx
3310 with 5.xx versions are difficult to upgrade and results to
no network.

[kristoffer]

the personal message alert tone ur referring is it when i have an incoming msg my cel will be toned then its from the composers? is that right? whats the site of the flash ur referreing? pls help me

[treng]

download flashtone here (http://kickme.to/gsmschwantz)

[kristoffer]

where can i download ringtone manager?

[treng]

you can also use ppm manager. for me its much more better.

;)

[kristoffer]

now i can my personal message alert tone am i right.. thanks a lot... i owe you one...anything more can i add here in my 3210?

[sam22]

@ kristoffer

you can change the "menu" to anything as long as it fits the

screen. use ppmmanager and search "menu", after changing,

calc ppm checksum in tools > Update All PPM CRC's and save.

then flash the file back to the phone.:)

:) :) :)

[glenborj]

Originally posted by treng
you can't add personal message alert tone. you can just replace the ascending and special, flashtone can do that. you can download flashtone 2.05 crack just try to search for it.

procedures:
1. Click on FILE/OPEN FLASH FILE
2. Specify the FULL flash you are using.
NOTE: Use the full MCU/PPM pack and do not include the PMM and EEPROM.
3. Select MODE (Alert or Ring tone)
4. Click on FILE/OPEN TONE FILE
5. Select the RTTL/RTX file you are using to change/insert into
your flash.
6. Select the tone you want to change and click
the CHANGE button or INSERT button.
NOTE:Insert does not work on the Alert Tone Mode because it is not
allowed by the Nokia programming.
7. You may repeat 3 to 6 for additional tones to be changed or inserted.
8. When done, select FILE/SAVE FLASH FILE AS and save the full flash
into a different filename.
9. Run a flasher program and flash the modified flash into your phone.
10. Update the FAID by using a BPhreaks logger or Koci logger to
generate a log file.
You may also use the FAID recalc by MBUS of Rolis or the
Dejan box 1.02 or higher.
NOTE:Your phone will not find network if you only use NK_CALC or
Roli's or EEPROM Tools.

Changing the Alert Tones on units like 6210, 6250 and 7110 should
be done on the Change Ring Tone Mode, because alert tones on these
units are actually stored in the PPM pack unlike the others, alert
tones are stored in the MCU part. But still, the displayed Alert
tone names will still be displayed in its default names because
the MCU assigned these names to them and not taken from the PPM.

When using flash from 3310, make sure the address read from the phone
is 200000 to 3D0000 only, or else you will get a "Contact Service"
error when flashed back to the phone.

Also, when using modifying flashes of 3310, use only version 4.xx
3310 with 5.xx versions are difficult to upgrade and results to
no network.




How about this, can you help me with my 6150, I have successfully changed the ringtones but the long ones ate the other tones and leaving only the names of the tones but the tone is the same as the last longest tone I have sent to the ppm. So now I just added few short *.txt tones using flashtone. Also I want to change the graphics of my 6150 but flashgraphic do not support it and other softwares with the same category too. I hope someone can help me with this... Thanks..