help

[loulou3124]

hi guys

i am a newbie in flashing phone.
so,i bought a flasher cable for serial port and an adaptor for lpt.
but when i try to upload the flash of my phone with rolis 4.78
it does not work.
i checked lpt port,it s ok.
but i don t know how mamy time is getting to upoad my flash.

could answer my question,please?

thanks.

[chunkhead]

Use the Rolis Flasher guide in the Forum FAQ! Follow this and then tell me if you still have problems!;)

[loulou3124]

yes in have again the problem.
and i dont know what it's the cause.
I have a cable for seial port and it has a switch f or m.
i am lost now.
maybe you will say i am a silly boy but i need help


thanks a lot.

[Tracid]

See my thread :connection solution.It may helps you!

[tiny1000]

I also have problems with rolis 4.78 I have an LPT flashing lead - And an m-f Bus serial cable. My phone is saying CONTACT SERVICE. I have tried the contact service doc but when I use rolis 4.78 I just get the Egg Timer - if I press the power button on the phone this makes no difference:(

[loulou3124]

oki tiny

we are twi boys with th e some problem
and i check all the connection.
i know that my cable is working cause i unlock my phone.
if you have an idea

[chunkhead]

With regards to the Flasher, try change the LPT port from 1 to 2 in Rolis settings (Step one in the Tutorial!)! I had this problem! As for your serial cables, if you have a switch for M & F, select M for unlock, FAID, reset etc. and F for logo's ringtones pictures ect.!;)

The adapter you have purchased may also be a WinDLS adapter! Try to flash with this instead of Rolis or Knok!:( ;)

[sergo_zmeia]

Is Your adapter for the F/Mbus cable...If its so You cant use rolis or Knok...different hardware in F/Mbus cable and flasher cable...
Regards!
Sergo_Zmeia

[tiny1000]

Hello Sergo_Zmeia thanks for your reply - I'm using a serial m/f bus and a Parallel nokia flashing lead - are these the right leads, because i'm not getting any joy at all form the parallel leads

[chunkhead]

You have the right cables! Just try my suggestions! Where did you buy the LPT adapter? You may have to use WinDLS!;)

[tiny1000]

Got it - tried leads on another comp - worked ok - is there a file missing off my laptop?

[jeep]

Originally posted by tiny1000
Got it - tried leads on another comp - worked ok - is there a file missing off my laptop? I can't access your hard drive from here so can't say if there's a file missing or not...... ;)

Laptop parallel ports aren't always suitable for flashing - make sure it's set to ECP and if it's either win XP or 2K that you have userport running. Otherwise you'll probably have to use a "desktop" PC to flash.


George

[chunkhead]

You never said it was a laptop! Also laptops sometimes have problems with supplying enough power to the parallel port in order to flash! That's only if your using batteries! Plug it into a socket to eliminate this! Ensure you have ECP set in BIOS! VERY IMPORTANT!;)