How can bring to life a 8810

[DRX]

It cannot communicate with computer because don't start.
It isn't recognized by flashers because the boot loader is incorrect.
What's the boot loader and f loader for Dejanflasher used by this model ? NSE-6 -8810.

[lonegunman]

Both roils and knok have a 8810 setting try one of them.:)

[Liam]

does anyone do the PS2 head for an 8810 that fits onthe flasher set and the mbus convertor cable?

[lonegunman]

No you have to make one or you can buy a normal m/bus cable

[DRX]

My cable is good because I've flashed a 3310 (flasher cable)
The MBUS cable is't connected by a pS/2 adapter and it's a normal cable , not switched MBUS//FBUS.

Knok sayd - cannot prepare phone
Rolis sayd -bootloader error
Dejan sayd -bad phone ram

What can I do in future ?

[Liam]

Try Rolis DCT-3 Flasher 4.78 beta build 006

This has support for 8810 where others do not.

[Sam_digital]

erm , i really hate the 8810 ...

[One SidE zerO]

I've got a 8810 to, trying to get connector for it but without succes.

Bringing the phone back alive does not have to be that complicated, you need to have a good full flash file of the 8810, and flash it to the phone .
If the flasher gives errors about boot loader or so , you can turn off security procedures within the flash applications .

I brought a 3210 back alive again once ,after i restored flash data back to phone (unlock partial) to the wrong mem address (0x0020000) and that's the beginning of the rom, so boot straps where deleted, and phone was DeaD

flasher program's check this on the phone before they flash back files to phone, so you have to un-check options enabling this check somewhere and flash a full fls of the same phone type to the phone and it has to work again.

I know rollis478 can do this because he did it for me to.
knok however gives more complications flashing back files to dead phones.

Ps. Do you have (complete) pinouts of the 8810?

Thankx