Quick Guide: Configuring and Using the DEJAN 1.08 KIT (Re-Post)

[ZNOD]

Greetings!!

(This thread was re-posted - from 32xx/33xx/34xx forum to nokia General Discussion)

Here is a quick guide on how to configure your DEJAN 1.08 Flasher Kit and make the dongles work on their proper programs

Before anything else, see to it that your DEJAN FLASHER KIT have the following:

1. Cables For 3210, 3310, 5110, 6150, 8210 and 8310 (depending on your kit, but DEJAN 1.08 Flasher Kit must have this cables)

2. 2 Cable Boxes/Dongles (The adapter that you will use to connect the cable to the LPT port)

BOXES Included In The DEJAN 1.08 Flasher Kit:

1. NK-BOX/Dongle - Called the Light Dejan
2. DEJAN BOX/Dongle - Called The Full Dejan (versions 1.00 to 1.04)

Configuring The Flasher KIT:

1. Set your parallel port in your computer BIOS as ECP or EPP and is usually set to 378 (check your motherboard manual on how to configure your parallel port) in windows it's 378-3F8 (if you are using Windows XP/2000/NT, refer to the links below)

When using universal flashers like ROLIS Flashers, KNOK, DCT3, use the box labelled NK-BOX to connect your flasher cable to the LPT (printer) port.

When using DEJAN's Software, use the box labelled DEJAN to connect your flasher cable to the LPT (printer) port.

In case you don't know what the box/dongle is, it is the adapter where to place your F/MBUS cable to plug it in your LPT port.

[D I O N]

kudos for the info. this is exactly what i need :)

by the way do i need a separate m2bus cable to run the NOKTOOL software? i'm a bit skeptic whether the cable could make an access to NOKTOOL SOFTWARE by ROLIS or not.:???:


tnx

[Rolando Eugenio]

[im just saving it to my pc for awhile, iwill do it later its been along time ive i been searching for this which will help me, by the way thank you very much
I will send to you the update later.

[Rolando Eugenio]

I THINK CABLES FOR DEJAN V 1.08 IS THE SAME AS V 1.07 ? SOFTWARE IS DIFFERENT? I HAVE SOFTWARE CD HERE BUT ITS INCOMPLETE ANY BODY CAN HELP ME, WHERE CAN I DOWNLOAD A SUPPORTING SOFTWARE FOR MY CABLES ? IS HTTP//.WWW.HANDY-FLASHPAGE.TF/? CAN HELP ME :) THANKS

[nuthatch]

hi!

im a newbie on this flashing/unlocking/upgrading thing. currently i purchased NOKIA DEJAN 1.07 and having problem connecting the phone (5210) to pc via the cable.

i followed all your suggestions, i did manage to d/l userport and add the codes for com1 and lpt1 port for WINDOWS XP.

i also followed by connecting the ff.:
a. cable1 the connects to the phone w/ rounded end TO the cable2
a. cable2 to NK-BOX Dongle
b. NK-BOX Dongle to the lpt1 port

i also switched "NK-Box" w/ DEJAN "V-1.07" Dongle.

BUT I STILL HAVING PROBLEM W/ ESTABLISHING CONNECTION.
i tried this on Nokia Tool by Rolis Ver 1.8 and other softwares that comes in w/ the cd of this product.

PLS HELP. thanks so much