View Full Version : 8210 to 8250 problem

07-09-2003, 09:20 PM
get this error msg:

MBUS_SecurityCommand : cannot execute 'Reset all (UIF,SCM) settings'
MBUS_ResetGivenSettings : cannot apply 'Reset all (UIF,SCM) settings' :-?

Someoneknow how to fix this problem?

many tnx

greets spoo

07-09-2003, 09:33 PM
what software u use?

07-09-2003, 09:38 PM
I'm not sure if it matters, but do you have a Rom6 8210? If you don't it won't work (I have a Rom5 and hence can't upgrade).

I don't know how to directly fix the problem, I'd suggest reflashing a backup and start again.

Or try a few more times?



07-09-2003, 09:43 PM
All i know the 8210 where have version file 5 up (i means the true flash) than can be flash to be 8250

08-09-2003, 12:49 AM
its ROM6 and it works fine but i killed the eeprom area and when im flashed it with an virgin eeprom i cant get the UIF to reset.... :(

08-09-2003, 12:50 AM
i use knok and rolis as flashing tools.... used rolis to flash it and knok to reset.

08-09-2003, 02:20 PM
seems like i got it worked with a backup rom eeprom area 3D0000 and up. :)

08-09-2003, 04:06 PM
Fifty bucks says that your using Win2K or XP! Knok will freak out in these operating systems! Try Knok2k3 or Rolis Noktool 1.9!

09-09-2003, 12:37 AM
chunkhead: danm right m8! ;p but the earphone still low... Knok2k3? where is it?


09-09-2003, 06:40 AM
Also try Rolis Noktool 1.9!

Here you go anyway though:

Noktools 1.9: http://blight.dk/nokia/down/index.html

Knok2k3: http://www.gsm-software.net/freedownload.php

10-09-2003, 02:55 AM
chunkhead: still get weak sound from the earphone.... and the knok2k3 did'nt even work right. but thanks for the help u gived so far.


10-09-2003, 05:20 AM
Is the volume turned down? Maybe replace the speaker! Just take one from a donor phone!

10-09-2003, 08:37 PM
But it worked fine before i flashed the phone. and the volume is on full. but i gonna try to change the part and see if it is a hardware fault.


11-09-2003, 08:42 PM
try use masking tape and put your speaker at there and pull the iron on the glue

12-09-2003, 05:31 AM
@ TokeiLampin

What??? What's the masking tape for? What are we heating with an iron? What benefit will this have?

12-09-2003, 11:20 PM
sorry chunkhead all i means because the magnet of that speaker not grip so well so i use masking tape to take the small iron where had at the speaker so the the speaker will clean and the magnet will get power back

14-09-2003, 02:38 AM
try use masking tape and put your speaker at there and pull the iron on the glue

I know what you mean, Use masking tape to clean any iron fillings/dirt off the speaker. Because the iron fillings/dirt will stick to the tape.

You can always just wipe any dirt off with your finger.

When dealing with poor english mate, you have to read between the lines.

As chuckhead says try a new one if the one thats in is not dirty, it maybe slightly damaged and just not vibrating properly.



16-09-2003, 09:17 PM
thanks mark (sound like the name owner of webnet irc server) sorry guys for my broken english.. i try to make u understand . for spoochy if u have the new one just replaced it