View Full Version : 8210 to 8250 problem
Spoochy
07-09-2003, 09:20 PM
get this error msg:
MBUS_SecurityCommand : cannot execute 'Reset all (UIF,SCM) settings'
MBUS_ResetGivenSettings : cannot apply 'Reset all (UIF,SCM) settings' :-?
Someoneknow how to fix this problem?
many tnx
greets spoo
TokeiLampin
07-09-2003, 09:33 PM
what software u use?
I'm not sure if it matters, but do you have a Rom6 8210? If you don't it won't work (I have a Rom5 and hence can't upgrade).
I don't know how to directly fix the problem, I'd suggest reflashing a backup and start again.
Or try a few more times?
Cheers
Bob
TokeiLampin
07-09-2003, 09:43 PM
All i know the 8210 where have version file 5 up (i means the true flash) than can be flash to be 8250
Spoochy
08-09-2003, 12:49 AM
its ROM6 and it works fine but i killed the eeprom area and when im flashed it with an virgin eeprom i cant get the UIF to reset.... :(
Spoochy
08-09-2003, 12:50 AM
i use knok and rolis as flashing tools.... used rolis to flash it and knok to reset.
Spoochy
08-09-2003, 02:20 PM
seems like i got it worked with a backup rom eeprom area 3D0000 and up. :)
chunkhead
08-09-2003, 04:06 PM
Fifty bucks says that your using Win2K or XP! Knok will freak out in these operating systems! Try Knok2k3 or Rolis Noktool 1.9!
Spoochy
09-09-2003, 12:37 AM
chunkhead: danm right m8! ;p but the earphone still low... Knok2k3? where is it?
greets
chunkhead
09-09-2003, 06:40 AM
Also try Rolis Noktool 1.9!
Here you go anyway though:
Noktools 1.9: http://blight.dk/nokia/down/index.html
Knok2k3: http://www.gsm-software.net/freedownload.php
Spoochy
10-09-2003, 02:55 AM
chunkhead: still get weak sound from the earphone.... and the knok2k3 did'nt even work right. but thanks for the help u gived so far.
greets
chunkhead
10-09-2003, 05:20 AM
Is the volume turned down? Maybe replace the speaker! Just take one from a donor phone!
Spoochy
10-09-2003, 08:37 PM
But it worked fine before i flashed the phone. and the volume is on full. but i gonna try to change the part and see if it is a hardware fault.
greets
TokeiLampin
11-09-2003, 08:42 PM
try use masking tape and put your speaker at there and pull the iron on the glue
chunkhead
12-09-2003, 05:31 AM
@ TokeiLampin
What??? What's the masking tape for? What are we heating with an iron? What benefit will this have?
TokeiLampin
12-09-2003, 11:20 PM
sorry chunkhead all i means because the magnet of that speaker not grip so well so i use masking tape to take the small iron where had at the speaker so the the speaker will clean and the magnet will get power back
marky752000
14-09-2003, 02:38 AM
try use masking tape and put your speaker at there and pull the iron on the glue
I know what you mean, Use masking tape to clean any iron fillings/dirt off the speaker. Because the iron fillings/dirt will stick to the tape.
You can always just wipe any dirt off with your finger.
@Chuckhead
When dealing with poor english mate, you have to read between the lines.
@spoochy
As chuckhead says try a new one if the one thats in is not dirty, it maybe slightly damaged and just not vibrating properly.
Regards
Mark
TokeiLampin
16-09-2003, 09:17 PM
thanks mark (sound like the name owner of webnet irc server) sorry guys for my broken english.. i try to make u understand . for spoochy if u have the new one just replaced it
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.