PDA

View Full Version : 6210 to 6250 and 3310 to 3315



cece
05-05-2002, 08:53 AM
Hi,

I have flashed my 6210 to 6250. It works fine, but there are some bugs (problems). Frist: the 1800 mhz signal is very week, second: the battery won't charge in the carkit (original carkit from nokia). A virgin eeprom won't help (the one i've got). A total reset with nokiatool won't help. Is there somone who has a solution for this problem. The software of the 6250 is very nice, but if there is no solution for it i have to flash it back to the original software.

Cece

Liam
06-05-2002, 07:48 AM
get a flash from an ORIGINAL 6250 and flash this, change the IMEI and update the faid BUT DONT do a full factory reset. This can make the 1800mhz stronger.

Not sure about the car kit... but mine worked fine in a nokia desktop charger

cece
06-05-2002, 01:30 PM
Is there someone who has a full flash of a original 6250
Let me know something

cece

Doc
06-05-2002, 07:16 PM
Hi cece!

Let me know if u have found a complete(!) 6250 backup...
Wanna try too. Have checked tons of parameters from wintesla (AGC values changed and some TX-power alignment but no success)

The owner of the complete-flash can also kill the IMEI if desired but it should be a complete 4MB flash files not just 3,625MB :-)

Doc

Liam
06-05-2002, 08:13 PM
someone give me an ftp to upload it to and i will post it :D

cece
07-05-2002, 07:44 PM
Hi Airwaves,

you can ftp it here:

ftp://kts.d2g.com/

thanks

Cece

Liam
07-05-2002, 09:26 PM
i am trying to connect but it disconnects me moments after i do.

cece
07-05-2002, 09:29 PM
Hi Airwaves,

you can mail me:

[email protected]

cece

Artstar
08-05-2002, 10:09 AM
Feel free to upload it to my FTP (and consequently people, feel free to then download it from my FTP!!) because I'll be wanting to try it as well. Might even solve my occasional freezing issues and the fact that B-Hacker's Nokia EPROMTOOL no longer recognises my phone.

IP: 211.28.59.175
Port: 33224
username: nokia
password: nokia

Thanx!!!

Liam
08-05-2002, 06:39 PM
uploading...

RosOne
08-05-2002, 11:46 PM
I don't think it'll work, but i'll try it anyway.

btw: there is a .doc in the 6210 dir about languages in 6210 firmware. There is a bug: PPM Pack J has the following T9 dictionaries:

- English
- Polish
- German

I'm sure about that cause i use Pack J

RosOne
09-05-2002, 01:41 AM
IT WORKED!!!

Airwaves: You're the greatest!!!I've got 100% 1800MHz signal!!!

I'm soooo happy! Thanks man! :D :D :D

Artstar
09-05-2002, 01:47 AM
Ok, my first theory has now been shot 3#-)

So now that it works, what about the car kit charging issue? Has that been resolved as a consequence? Is it also safe to flash in the 5.03 update (I'll be using the R pack since I'm in Australia) using Rollis Flasher without flashing anything else in afterwards other than the Quick setting of FAID and IMEI?

Artstar
09-05-2002, 02:14 AM
Dude, it's on my FTP. Just follow the instructions, jump in and grab it son!

Artstar
09-05-2002, 02:20 AM
Oh and if I may take the opportunity to shout out a big THANK YOU to Airwaves for uploading the complete flash of the 6250! I would've taken my laptop into work and copy our virgin 6250 but your contribution just saved me from carrying about 3kg of shit with me!

Thanks mate! (Currently flashing in 5.03 MCU+PPM so we'll see how it functions after this).

Artstar
09-05-2002, 02:45 AM
I did a small experiment to see what would happen here.

Flashed with Airwaves' contribution, immediately saw 1800 band.

Flashed in 5.03 MCU+PPM (language pack "R"), still saw 1800.

Went in to EEPROM TOOLS v0.34 and hit "Device Data" in the Special Factory Settings section and lost the 1800 band again!

So now I'm repeating the first 2 steps (as well as then loading up logomanager to restore all my gfx and then Nokia's Backup/Restore prog for all my other stuff) and leaving it at that!!

In short, DON'T USE EEPROM TOOLS!

Liam
09-05-2002, 08:54 AM
i think i said earlier, dont do a factory reset, when updating the IMEI with EEPROM Tools, it does this function, so dont calc the FAID and change the IMEI on 6250 conversions with EEPROM Tools :D

Use knok to change the imei and calc the faid and yes it is safe to upload a new MCU and PPM, its the eeprom which stores the data for signal etc so dont reset or anything like that and it should be fine.

not got a car kit so i guess download it and flash it and see.....

and if you have troulbe flashing it etc or want to follow some of my guides on editing nokias. check out my site, its on the row of buttons under this thread.

Valis13
09-05-2002, 10:42 AM
I am another happy camper :) By the way EEPROM Tools worked for me... Also car kit works... I didn't do a faid calculation after I upgraded to 6250 ver:5.02. I did it when I upgraded to 6250 ver:5.03.

Thanx guys, nice one :)
Chris

Liam
09-05-2002, 11:08 AM
<font face="Verdana" size="5">
<marquee width="199">vote my site to thank me :D</marquee></font>


<a href="http://topsitez.org/cgibin/topsitez.cgi?ID=airwaves2002">
http://topsitez.org/cgibin/topsitez.cgi?ID=airwaves2002</a>

Valis13
09-05-2002, 12:13 PM
Voted! :) If you want more votes can you fing PPM E for the 7110 version 4.88 only!?
If so I guarantee you at least 50 votes (50 happy people:)

Keep up the good work :)
Chris

Artstar
09-05-2002, 01:01 PM
Nope. Still won't charge in car kit and handover performance is seriously diminished. My calls were dropping in and out whilst in motion.

Not happy so I've flashed back to my 5.56 6210 software.

Valis13
09-05-2002, 02:46 PM
Weird... I will try to flash another one now. Mine works fine...

Valis13
09-05-2002, 02:50 PM
I am currently flashing another 6210 with airwave's 6250 flash file
using Knok 22...
Done! calc FAID, clear SP locks, set IMEI...

100% signal and car charger works....

as for handover I will drive around later and tell you... The other one was okay...

Artstar
09-05-2002, 02:59 PM
Though it shouldn't really matter, I'm guessing maybe there's a tuning difference between Australian and UK models? It's only a wild guess, despite GSM is meant to be as the name suggests, GLOBAL and hence, indifferent to whichever country it may be working in.

Nevertheless, it was a nice thing when it was in there but without performing to the same standard as the 6210 s/w nor charging in a car kit, it's just not worth it IMHO.

cece
09-05-2002, 05:39 PM
Hi,

I can't download form the ftp site. Can someone tell me where i can download the file or can some upload the full flash of 6250 to my FTP site: ftp://ssl.d2g.com

cece

jvaudrey
10-05-2002, 02:18 AM
Hello

Can some on please email me the full 6250 flash file, i have been to the ftp files listed in this thread and they arnt working

i would be really greatful if you could either email me or point me in the right direction

thanks

john

Liam
10-05-2002, 08:03 AM
Use these settings

IP: 211.28.59.175
Port: 33224
username: nokia
password: nokia

with cuteftp or bulletproof ftp

make sure you enter the password and username correct as you wont get sent to the nokia section, you'll just see some MP3s


BTW, i have just uploaded the new 3310 -> 3315 upgrade flash

flash it with rolis
unlock with eeprom tools
calc the faid with knok
change the IMEI with knok

dont use eeprom tools to calc the faid/change the imei as it will do a factory reset and you will lose the new settings

cece
10-05-2002, 09:23 AM
Hi

I can't connect your FTP site, are you sure that evrything is al right

Cece

Artstar
10-05-2002, 10:18 AM
Yes the FTP site is just fine. Check your firewall settings. Especially if you're trying to access it from somewhere other than your own home PC (i.e. work, university, etc.), then you're bound to be restricted from accessing a port that high.

Sorry but if I want to keep my cable account, I have to set my ports high to prevent them being detected by my service provider in a port scan.

Liam
10-05-2002, 10:19 AM
make sure you use the correct USERNAME AND PASSWORD AND PORT

try ftp://nokia:[email protected]:33224

hey

and dont forget to vote :D

http://topsitez.org/cgibin/topsitez.cgi?ID=airwaves2002

antlane
10-05-2002, 11:37 AM
I've flashed my phone with Airwave's flash file and the signal on 1800 looks fine. However, in a call, although the caller can hear me, I find their voice keeps breaking up making it difficult to have a conversation. It can be fine for 20 secs and then it starts going mad.

Is there anything that can be done or is this just the standard 1800 problem? I used a Vodafone (900) simcard and the call quality seemed fine.

Thanks,

Ant.

cece
10-05-2002, 11:46 AM
Finaly, i have the file from your ftp site

Thanks

Cece

Artstar
10-05-2002, 11:54 AM
Originally posted by antlane
I've flashed my phone with Airwave's flash file and the signal on 1800 looks fine. However, in a call, although the caller can hear me, I find their voice keeps breaking up making it difficult to have a conversation. It can be fine for 20 secs and then it starts going mad.

Is there anything that can be done or is this just the standard 1800 problem? I used a Vodafone (900) simcard and the call quality seemed fine.

Thanks,

Ant.

I was experiencing the same problem whilst on the road. Aside from the critical fact that my car kit no longer charges a 6250 flashed 6210 phone, this was an equally major downside to the upgrade.

So I pissed it off in favour of my 6210 s/w updated to 5.56 :D

cece
10-05-2002, 12:59 PM
I have flashed my 6210 with the full flash of a 6250. The battery won't charge in a nokia carkit.
Is there a differents between the carkit for a 6210 and a carkit for a 6250?
Have someone technical documentatie of these carkits?

Cece

antlane
10-05-2002, 01:04 PM
Interestingly, mine did charge in the carkit. I just had crap 1800 reception! You can't win either way.

cece
10-05-2002, 05:38 PM
The only difrent between a nokia 6210 and 6250 is that the 6250 has not a pin 2. The pin 2 is used for charging control, the phone gives a PWM signal out (32 ... 37Hz, 1...99%). So the carkit (cark-91) needs that signal , and thats the reason why the battery won't charge. If we now the differts between cark-91 en cark-111, maby whe can solve the probleme

Cece

Valis13
10-05-2002, 08:05 PM
I will insist, my upgrade gives me PERFECT 1800MHz band including handover (inter+intra)...
The only thing I noteced is that power control does not work (i.e. Power emitted it always max) and AGC is a bit slower...

Chris

ac6210sr
12-05-2002, 12:30 PM
Mine works perfectly fine using Airwaves flash but i did not flash the eeprom part still using the 6210 5.56 eerpom.

ac6210sr
12-05-2002, 02:16 PM
Mine works perfectly fine using Airwaves flash but i did not flash the eeprom part still using the 6210 5.56 eerpom.

willumpie.nl
12-05-2002, 02:37 PM
were can i download that full flash, on airwaves site i can't find it.

Liam
12-05-2002, 06:49 PM
ftp://nokia:[email protected]:33224

its on there.

Valis13
12-05-2002, 07:56 PM
Curently (12/5/2002 19:57 GMT) the site metnined above is up and running... make sure you have set the username/password and port correctly!
Alterneetively I can upload the files to an ftp if you specify one.

Cheers,
Chris

willumpie.nl
12-05-2002, 10:01 PM
i'm behind a freesco router and i cant acces that ftp :S

ì've made a free ftp acount at web1000

url: ftp.web1000.com
user/pass: willumpie_nl_web1000_com / old73177

can some one upload here the flash file? (6250)

thnx!

Doc
15-05-2002, 11:30 PM
Hi!

To all who SUCCESSFULLY updated their 6210 -> 6250:

Activate the netmonitor and go to menu 23.
Then look at the value in the 3. row to the right.
This value give you the current consumtion in
1/10 mA.

Check how much current it's eating while in GSM-1800 band and then compare it with GSM-900
(used a friends SIM or international roaming if u live near the border.

I discovered that my 6250-flashed 6210 is taking upto 50mA without the lights in GSM-1800!
So it kills the battery in almost one day.
When I switch to GSM-900 it just has a 5,4mA
(@ full charged with charger in and no lights).

Please post your values. Thanks.

Doc

MUF
22-05-2002, 01:36 PM
I flashed full 6250 MCU+PPM+EEPROM with Rollis, but without reflashing Virgin EEPROM, and everything seems to work but voice tags? Am I the only one having this problem, is it working for you guys? Should I reflash VIRGIN?

Another problem is that I cannot make Dejan Flasher work, but it seems to work under Dark Flasher! I used same f_loader, config and boot files as DarkFlasher - no luck. I also have problems with Nokia Info (from Dejan) with M2BUS cable, but other M2BUS based tools are running fine. Any ideas?:(

willumpie.nl
22-05-2002, 04:56 PM
before you flash your 6250sw remove the voice tags they can't be red at 6250 actualy you can make new ones then.

suc6

is there btw any fix for the 1800? if i'm on a place where 1800 is strong i've got full reception, else when it is weak it doesn't recieve anything
did any one suceed by retuning with wintesla?

MUF
22-05-2002, 05:17 PM
I erased all numbers with voice tags and everything is fine now. How can I check if 1800MHz works fine? I'm in Belgium, Proximus subscriber. Car kit and desktop chargers work fine.

cece
22-05-2002, 07:31 PM
Hi MUF,

I from belgium to. Do you have a original carkit from nokia ?

Cece

MUF
22-05-2002, 07:46 PM
Yes, I have original carkit from Nokia. I do not know the exact model though.

badger
23-05-2002, 09:27 AM
Can someone pleeease e-mail me Airwaves full 6250 flash file. I am behind a firewall at work and can't retrieve it from ftp.
Thanks guys.

[email protected]

badger
23-05-2002, 12:36 PM
I have it now.
Thanks Tony V.

durius
25-05-2002, 12:37 PM
Hi airwaves,

I've been trying to get the full flash from your ftp but I always get an error from the prog I use (FTP voyager...)


STATUS:> Connecting to "211.28.59.175" on port 33224.
220 Serv-U FTP Server v4.0 for WinSock ready...
STATUS:> Connected. Logging into the server
COMMAND:> USER nokia
331 User name okay, need password.
COMMAND:> PASS *****
530 Not logged in, only one session from same IP allowed at a time.
ERROR:> Password not accepted
ERROR:> Unable to login
STATUS:> Waiting...
STATUS:> Retrying connection, attempt 2
STATUS:> Connecting to "211.28.59.175" on port 33224.
220 Serv-U FTP Server v4.0 for WinSock ready...
STATUS:> Connected. Logging into the server
COMMAND:> USER nokia
331 User name okay, need password.
COMMAND:> PASS *****
530 Not logged in, only one session from same IP allowed at a time.
ERROR:> Password not accepted
ERROR:> Unable to login
STATUS:> Waiting...


Is there anything wrong???
I use the right user and password.

Thanks for helping

durius

MUF
25-05-2002, 11:42 PM
Seems that carkit is not charging after all. At first, I thought it was, but now battery is not charging, or charging too slow. It looks like I am going back to 6210, unless someone has a solution...

cece
26-05-2002, 07:55 AM
TO MUF

The only difrent between a nokia 6210 and 6250 is that the 6250 has not a pin 2. The pin 2 is used for charging control, the phone gives a PWM signal out (32 ... 37Hz, 1...99%). So the carkit (cark-91) needs that signal , and thats the reason why the battery won't charge. If we now the differts between cark-91 en cark-111, maby whe can solve the probleme

Cece

MUF
26-05-2002, 09:02 AM
After I posted last message, I left phone with 4 segments on the battery gauge. During the night, battery went completely dead. It looks like phone is eating up battery like hell, but not all the time. Maybe that has to do something with the 1800MHz signal. I still do not know how to check on which frequency phone is currently on? I guess we need to find a way to extract good features from 6250 flash and leave communication part from 6210. At least the desktop charger still works.

badger
28-05-2002, 08:37 AM
Mine now works after much messing about and using Airwaves full flash. No matter what I did the signal kept dropping out and the display disappearing (the usual FAID problem). Quick set FAID wouldn't work in Knok22. I found I had to use Nokiatool by Rolis, click on update faid and then completely remove the battery for a few seconds. If this doesn't work repeat again. Don't know the reason for this but I was just about to flash 6210 5.56 back into the phone before I repeated the FAID and reset and 6250 5.02 then worked fine. Oh, and I then upgraded Airwaves 5.02 to 5.03 and repeated the FAID update process using Rolis and it works fine.
6210 5.56 => 6250 5.02 (full) FAID\power off =>
6250 5.03 (PPM+MCU) FAID\power off
Voila!!

nokia6210e_0527
29-05-2002, 11:13 AM
Use airwaves flash, by far the easiest, use nok tool by rolis 1.8 to update faid, update sp locks, calc your imei, YOU DONE! Thanks airwaves for the file, many people are impressed with the few extra features in the menue, the only thing I don't like is the pic of the 6250 in comparison to the pic of the 6210 in the menue. But then there is no pleasing some people is there!!!

MUF
30-05-2002, 08:25 AM
To those that think their upgrade 6210->6250 is working: have you tried charging in the carkit? If you haven't, don't confuse others with claims "everything is working", but rather use "everything I tried works":). I think I have the same results with flashing MCU+PPM and MCU+PPM+EEPROM when it comes to carkit - it won't charge. Part of 6250 code which is probably in MCU area, probably is not sending the correct signal on pin (2) to the carkit. It displays "CHARGING" as soon as I seat the phone in the carkit, and I can even see some activity in the menu 20 in net monitor, but the battery IS NOT CHARGING, or the charging is so weak that it does not make any difference at all.

MUF
31-05-2002, 03:51 PM
I ended up finally with 6210 5.56 flash on my 6210. A piece of advice for people decided to stay with 6250 software: do not plug upgraded phone into Nokia 91 carkit, otherwise you will end up with a battery with decreased capacity, or a destroyed one, like me. Inadequate charging routines from 6250 probably demolished poor bastard.

nokia6210e_0527
31-05-2002, 09:35 PM
MUF thanks for the advice, I've left my 6210 as a 6250. Where did you get 5.56 software for the 6210? I thought the latest was only 5.27?

Liam
31-05-2002, 10:48 PM
5.56 is the latest, its been out some time now.

MUF
31-05-2002, 10:49 PM
You can get it at http://www.gengheraenga.net/

Have fun!

nokia6210e_0527
01-06-2002, 11:37 AM
Thanks guys, the site is very good, up-to-date and all that.

MUF
11-06-2002, 02:13 PM
Ignore my previous post about upgraded 6210 to 6250 and Nokia carkit for 6210/6110 - it seems that I attached my old battery at some point and forgot about it. I guess the carkit still won't charge it, but it will not destroy it after all, so feel free to experiment. Sorry about that, battery is intact.

Liam
12-06-2002, 08:30 AM
Originally posted by durius
I've been trying to get the full flash from your ftp but I always get an error from the prog I use (FTP voyager...)



Click this link to open it in Internet Explorer
ftp://nokia:[email protected]:33224

or

manually enter these into you ftp program

address - 211.28.59.175
port - 33224
username - nokia
password - nokia

these two work with bulletproof ftp and internet explorer.

the log file suggests your allready connected or that you have the ip of someone blocked or allready connected.

if your on dialup, disconnect and reconnect, if on cable then wait a bit and try later and close any ftp programs down or internet programs

hoyas
17-06-2002, 06:39 AM
Can someone pleeease e-mail me Airwaves full 6250 flash file. [email protected];)

welshwizard
19-06-2002, 08:12 PM
airwave's full flash @ my site :)

http://www.geocities.com/dwoosnam/index1.htm

plus full guide for the upgrades.

Liam
24-06-2002, 09:13 AM
FAO: Those who keep emailing my about the flash file...

ftp://nokia:[email protected]:33224

its on there, in the 6250 folder, 6210_6250_502_c_upgrade.zip - download that.

All the tutorials are on my site - www.liambramwell.com - my airwavescomms.co.uk site doesnt exist no more.

davidl
17-07-2002, 07:55 AM
I just can't get 1800 orange signal into this fone. Oddly, it picks up Voda & O2 with the 5.02 firmware, but.. haha, loses O2 after flashing with 5.03 ! both are PPM-O.

Could it be an issue with the physical hardware revisions ?

Liam
17-07-2002, 10:33 AM
Possibly, but I dont know.

the only other 6210 apart from the one I use myself doesnt work on 1800mhz anyway, and its not even stolen :S but out of warrenty and I cant do anything about it :S

alileila
19-08-2002, 06:26 AM
to all..

anyone here can give me full flash file for nokia 3330 v3.xx. Im really need it.. plz email to me at

[email protected]

Thx:)

durius
31-08-2002, 03:05 PM
Hello,

I am having the same problem with cark-91.
The 6210 converted to 6250 will not charge battery in the carkit.
The battery meter goes up and down and the battery will discharge completely. There must be some difference in the carkit for 6210 and the one for 6250....
If anyone knows how to solve this please let me know by email...or in this post.
For the moment I had to revert the 6250 "clone" to a real 6210...although I miss some of the great 6250 software.

Thanks.

durius

KnokKnok
16-09-2002, 12:13 PM
1800 MHz sucks a lot of power...
I noticed that when I convert my 6210 -> 6250. Normally my 6210 last for 3 days but when I flashed with 6250, it sucks and last for 1 day only.

Is there any way to disable 1800MHz?

prodigiez
22-09-2002, 02:07 PM
where can i get flash cables in malaysia(penang) ???

wklau
06-10-2002, 03:26 AM
to prodigiez:

you can get it from BJC at Penangf Island or build it you own :)

tempe
17-10-2002, 10:25 AM
It is not so difficult to build it your own. I don't know in Penang, but in KL, you may find the parts at Jalan Pasar. It cost me less than RM10.00.

c0r3dump
21-10-2002, 03:00 AM
wah, so cheap.. RM 10 only. Can u please give me the specific shop.

tempe
21-10-2002, 05:58 AM
What you need are :
One SN74HC14 chip
two diode
two resistor.
One printer connector
PCB board

You can get them from any shop at Jalan Pasar...

I spend RM20 for two cables. One flasher cable and one MBUS/FBUS cable.

Evil Neo
23-10-2002, 10:15 AM
simply to convert 6210 -6250 useing dejan box and windls

just flash your 6210 as 6250 by forsed dawnload and you want get any problems and no need to use a eeprome

just try it and tell me the resulit

tarooka_vip
23-10-2002, 07:06 PM
Evil Neo

could u tell me from where can i bye dejan box or flash cable

iam from egypt from cairo , help me if u know any information

about it and its price.....

thanks ......

ReaperXP
23-10-2002, 08:23 PM
How do i change my operator logo when i have Project Z, logomanager won't work anymore

Evil Neo
23-10-2002, 11:13 PM
Originally posted by tarooka_vip
Evil Neo

could u tell me from where can i bye dejan box or flash cable

iam from egypt from cairo , help me if u know any information

about it and its price.....

thanks ......

add me on msn messnger
[email protected]

theremoids
25-11-2002, 04:48 PM
Originally posted by ReaperXP
How do i change my operator logo when i have Project Z, logomanager won't work anymore

it's because of this:

[email protected]@.....@[email protected]@[email protected] 05.57 PrjZ.07/10/02.NHM-5 r1a.N'Free.org...F.F........................

rones123
28-11-2002, 11:25 AM
hi


is ther people who has modded
and buted something extra in
6210 or 6250 files

i liko to get those

rones123
28-11-2002, 12:47 PM
continue of previous

so what i´m looking
some new features in 6210 or 6250

as profile logos and full size digital clock animation
what 5210 have

i have all ready flash 6210 to 6250
and edit menus

shaidi
10-12-2002, 09:08 PM
whats the latest version for a 6210 and where can i get the flash file so i can flash it to my 6210, and if there are other options that would go with it.

rones123
11-12-2002, 09:21 AM
latest version of 6210 is 5.56

and you can download it
download section

or

http://www.thony.xtr.at/dd69/

DigitalJepoy
31-12-2002, 02:55 PM
where can I get a new language pack for nokia 3310?

gsmtech-SK
12-01-2003, 09:40 PM
on www.gengheraenga.net or
brad.gsmunlock.sk

RX5
25-01-2003, 09:54 AM
what program can i use to flash an eeprom flash file to a 6210 unit? im trying to upgrade a 6210 to 6250...i got only the MCU & PPM compined...no eeprom.....in rolis, i get error msgs...any sites
that have complete MPC+PPM+EEPROM flash file for 6250???

thnx....

pls mail it here:

[email protected]

again , more power ;)

duffonline
29-01-2003, 08:20 PM
What software do i use to upgrade a 3310 to 3315 and can i use a standard Mbus Fbus cable to do so??

tempe
30-01-2003, 04:05 AM
?

vinice_79
26-02-2003, 09:31 AM
Hi There

Try to search at the forum there got a lot way to update 331=>3315, he he he

wojti
28-02-2003, 06:06 PM
If u have v 3310 5,57 use a Knok95 and Mbus

nicelad_uk
04-03-2003, 08:03 PM
Hello, ive got rolis, the flashing program, and the 3310 flash file to convert to 3315.

The cable i have plugs into the serial port, and the program says LTP 1 or LTP 2, is this the parallel port? Can the serial cable that i have work?

Regards

Rich

PcDoc
16-03-2003, 09:14 PM
After several flashes (playing around - really :rolleyes: ) I got my 6210 to work as a 6250 in both 900 and 1800 networks. I could never get Airwaves files (or even his ftp!!!!! site) but I got my FULL flash from WelshWizard (Thanks BTW) and it works swell.
Now I tried to flash F lang Pack, and that's when it all went south!! Phone kept hanging up, after 0 signal ?? :confused: .
Anyway reflashed and it works fine (I don't need the Greek anyway) but it would be nice to know if anyone has any ideas .....

Thanks

Doc :p

denk
24-03-2003, 02:50 PM
hi...
u can made.
visit http://www.gsmdevice.com/schematic/nokia.htm
good luck!!

mhmood20002
10-04-2003, 07:33 AM
C:\WINDOWS.000\Desktop

:grin:

sigs225
16-04-2003, 05:59 PM
Hi!! :confused:

I've tried to find the FULL 6250 FLASH anywhere on the net but still can't find it! All links i've found don't work!!

PLEASE HELP ME AS IT IS REALLY IMPORTANT FOR ME!!

I you have THE FULL 6250 FLASH you can mail it to [email protected]

THANKS!!:)

-skunk-TEST
10-05-2003, 04:29 PM
hey.
i just tried to get airwaves flashfile from the ftps.
but i could not connect to any of them. i tried to connect with wincmd and IE6.
can anybody please give me a possibility to get this flashfile?!
by the way, my mail addess is: [email protected] :D

dragonjoe
15-05-2003, 11:48 AM
Hi all!

When flashing old ( <4.45) phone with 5.57 flash file (with rolis, knok, dejan), the phone freeze and (restart) when the temperature (in netmonitor) reach +35 °C.
I not flash the eep+pmm, only mcu+ppm, and recalculate FAID, set only UI settings.
I tryed different flash versions (5.57, 5.55, 5.47 with eep), but the problem not solved.

Someone can help me?

Many thanks!
And sorry about my bad english :rolleyes: :confused:

leecrtm
16-05-2003, 07:38 PM
RE- Hi!!

I've tried to find the FULL 6250 FLASH anywhere on the net but still can't find it! All links i've found don't work!!

PLEASE HELP ME AS IT IS REALLY IMPORTANT FOR ME!!


THANKS!!
==============================================


Have a look here h**p://www.gengheraenga.net/

-skunk-TEST
16-05-2003, 10:57 PM
@leecrtm

can u tell me which file it is? there are many flashes for the 6250, so i dont know which one is the file for the 6210. :(

luther
19-05-2003, 04:37 PM
@ RX5
if u have a full bakup of 6210, open it in hexworkshop. then find this offset, 03A00000. this is the start address of ur eeprom ( end address must be the end of flash file. select this block then copy.... open a new file paste this then save............

or simply download virgin eeprom.:D

if u need clarifications just email me.;)

gjjebaliya
19-05-2003, 07:21 PM
when nokia 3310 flashing at that time tx=0 error are appier so how can i solw this error

luther
20-05-2003, 04:17 AM
try increasing the delay index pal.;)

airwreck
17-06-2003, 10:04 AM
i bought 3310 for my pamangkin

viro2002
24-06-2003, 10:40 PM
Originally posted by ReaperXP
How do i change my operator logo when i have Project Z, logomanager won't work anymore

Try setting logos to other operatorz 'n after 10+ times it'll unlock tha ****.

viro2002
25-06-2003, 12:06 AM
Could someone send me the 3315 flash file?
My e-mail: [email protected]

Does anyone knows how can i upload new languages to the phone(without flashing cable >flash sms???<) and where can i get the languages?

Thanx for help! :)

bsbbrian_1999
05-07-2003, 07:32 PM
erybody i have a nokia 3390
imei 010072305503283 i need the codes
hope u can help thanks

shaidi
05-07-2003, 08:25 PM
go in to this site.....


http://nokiafree.org/forums/f44/s

Salmankhan
08-08-2003, 02:46 PM
nice the 3315 works perfect for me !:D :D :D