PDA

View Full Version : 5510 Ext Ui Dsp



JAC
29-09-2003, 12:38 PM
Hi,

I have a 5510 with a fault.It boots up then resets itself.I have read about the EXT UI DSP, i have got the software, modified my fbus lead, but still I cannot write to the EXT UI. It reads and starts downloading, then gives ERROR7.
I have tried this on a laptop using win98se, and an XP Server, both without any joy.
If anyone has full schematics or instructions as to rectify this, please post here.

Thanks

JAC

www.jac-computers.co.uk

liteFun
07-10-2003, 05:04 PM
works very well.
but i would say, don't do it with laptop.
i used win98se, not sure if it works so well with win2k.

JAC
08-10-2003, 07:20 PM
Thanks for your reply.I have managed to download the files to EXT UI, but now it comes with NAND error or similar.If you have any more ideas, please let me know, as I am getting frustrated keeping on flashing this!!
:evil:

Regards

JAC
www.jac-computers.co.uk

shin
14-10-2003, 10:23 PM
check this:
1.did u flash the UI with the charger plugged in
2.if your cell phone can still be powered on then flash the UI with the software while your phone is still turned on.
the soft works for me.
i'm using windows ME

JAC
14-10-2003, 10:59 PM
I will try it with the phone powered on then let you know.I have tried with a charger plugged in and the phone off, but i get this NAND error.
Will post results back here!

JAC
www.jac-computers.co.uk

Aiqueazia
12-03-2004, 05:07 PM
i have this error:
ERROR01: Fail to communictae with ext_ui board! Reset the phone! or check the cable connection| or check the ext_ui board+

i have the F+Mbus cable, i put the phone charging and conect the cable but always give me this error

i try on Me, xp...

krowoks
08-04-2004, 09:32 PM
5510 flash extra ui can be work use pure FBUS only and u can made ur self using standart 3310 pin with blue wire in RX and white wire in TX,mbus pin not use . and thats all work in my 5510. and try it at 98 se.......

just try........:)


sorry about my english

best regards
krowoks indonesia

alectronics.de
13-05-2004, 11:57 PM
Hi.
does anybody really repair the 5510 with this method?
cause ive tried it many times, but i alway failed.
i tried it with winXP and different mobiles and i always get the "no connection" error.
can anybody help me...cause ive now 2 5510 that i have to repair this way.

bye,
skunk


@krowoks:
can u detailly tell me how uve done it?

krowoks
16-05-2004, 12:49 AM
u can mail me or use yahoo messenger to chat with me.
for easy way is......
1. u need modified ur 3310 fbus ( blue wire inside connector move to white wire )
2. if u dont wanna use charge u can use good battery
3. make sure ur cable data is already
4. power on ur handset before flashes
5. make sure log message is on
6. wait until finish

if u still have a problem contact me.....its free
i just to try help somebody need my help

regards
krowoks indonesia

alectronics.de
16-05-2004, 03:01 PM
hi. thank u for ur answer, but i still have some questions.
im gonna reply the points u mentioned.

1. I have such a cable, i tried it with an original nokia and a usual data cable.
2. do i have to plug in the charger to flash it? i only used batteries which were almost "dead"
3. what do u mean with: "make sure ur cable data is already"?
4. power on? i think the battery is loading when the phone charger is pluged in....?!? so here i have to power on the mobile while charging?!
5. the log message in the EXT_UI flash program?
6. i would be very happy if it starts one time...

i hope u can answer these questions. ive got only ICQ, perhaps u can give me your ICQ UIN if u also use it.

thanks a lot....

shin
29-05-2004, 04:00 AM
1. u need a ussual switchable F/MBus Cable that has been modified (open the cable, move the position of the blue wire to the white wire and the other way around, and put the switch to FBus)
2.yes u have to plug in the charger, even if u use a good battery it's better to plug in the charger
3.i think what krowokz meant was make sure the data cable is already modified (correct me if i'm wrong)
4.yes power on the phone. the software flashes the external UI Board while the phone is turned on
5.the log message....i'm not sure, i kinda forgot about that partbut u have to select the files correctly that's for sure.
6.i used the software about 7 times and it works 6 times ;) , the 7th phone needs to have the ccont replaced first since afterwards it's fine.

good luck!

alectronics.de
30-05-2004, 02:42 PM
thanks fpr ur answer.
i tried it again, but it was not successful.
i do not know if i do something wrong cause i exactly did it as u said.
ill try it soon with win98, perhaps this will work better...


EDIT:
the fbus log:

<00
>1E 28 00 00 00 07 42 D2 00 47 02 01 60 00 3E BB _TEST_SELF_TEST_REQ
Wait UI ACK timeout
<00
<00
>1E 28 00 00 00 07 42 D2 01 47 02 01 41 00 1E BB _TEST_SELF_TEST_REQ
<00
Wait UI ACK timeout
<00
<00
>1E 28 00 00 00 07 42 D2 02 47 02 01 42 00 1E BB _TEST_SELF_TEST_REQ
Wait UI ACK timeout
<00
<00
>1E 28 00 00 00 07 42 D2 03 47 02 01 43 00 1E BB _TEST_SELF_TEST_REQ
Wait UI ACK timeout
<00
<00
<00

krowoks
09-06-2004, 06:27 PM
ui flash message show ur phone not standby ( power not on ) if power has on and the message just like that maybe ur modified cable data not correct :)
i try to post view pic of modified cable data and fbus message if power on but not this time.
maybe next time i'll show u

regard
krowoks

-skunk-
09-06-2004, 06:48 PM
hi.
i think i modified my cable correctly, but of course the phone is only powered on for 8 seconds, so the program cannot test the phone.
id be very glad if u post some screenshots and pix from your program/cable.

shin
10-06-2004, 02:10 PM
if the phone only powers on for about 8 seconds then i think u will have to replace the ccont first (that's exactly what happened to the 7th 5510 i worked on which i failed to repair using the software).
about pictures and screenshots i'm sorry but i have none.my harddrive just failed a couple of weeks ago and i lost almost every single data i've collected :cry: .maybe krowokz can post his (hopefully).

-skunk-
10-06-2004, 02:35 PM
i thought that this "8-second-error" is also caused by a faulty ext_ui?!?

deadspot
11-06-2004, 04:22 AM
did u clean the test point of ur cellphone maybe its corroded....

-skunk-
11-06-2004, 12:07 PM
why do i need the testpoint?
i only use the connection points to connect the data cable.
(or is it the same?)

deadspot
14-06-2004, 03:52 AM
its the same bro,.....

-skunk-
14-06-2004, 02:43 PM
hm...shit...

Rippy
16-06-2004, 11:08 AM
To -skunk-:
Did you resolve you problem?
I am try to describe a problem and write some usefull tips for programming Ext_UI at http://nettoyer.narod.ru/opinion_extui.html
Sorry, but in russian only (yet)

may be http://webtranslation.paralink.com/ is will be usefull for you.

If yuo have any questions, please write me to my e-mail, not to forum
rippy(at)mail333_dot_com