PDA

View Full Version : 6210 flash problem



shaidi
30-09-2003, 12:04 AM
hi

i flashed my 6210 to a 6250version. everything is fine but no signal, it stays on for a few seconds and goes off then it says sim not accepted.
whats the problem here...
anyone for help thankssss

sagarka
30-09-2003, 12:25 AM
just update faid with noktool u will solve yours problem





hi

i flashed my 6210 to a 6250version. everything is fine but no signal, it stays on for a few seconds and goes off then it says sim not accepted.
whats the problem here...
anyone for help thankssss

shaidi
30-09-2003, 01:46 AM
i did update FAID. but still no way, im thinking i'd reflash the fone again.
is there any other way..

thanks for the reply

sergo_zmeia
30-09-2003, 01:04 PM
Try with chunkheads knok method...after that update FAID with nok tool 1.9, SP locks, software reset, update FAID again..
By the way did You have this problem befor flashing the phone..
Regards!
Sergo_Zmeia

shaidi
01-10-2003, 01:49 AM
ok what i did was.....

i used rolis to flash a 6250 full flash to a 6210.
when its done i used nokia tool to update faid, set default settings and clear lock.
i guess, this is what makes it work...
when i turn it on, the signal bar wont show, and a few seconds later the fone will restart by itself and say sim not accepted.

now i tried to reflash the fone and rolis is tell me (TX=HIGH) or bad RAM
i feel like taking the fone and braking it...

the flash cable works great on a 3310, never had a problem with it...only on this fone 6210..

what do u think???

thanks

sergo_zmeia
01-10-2003, 12:58 PM
Run knok ->erase full flash, after that flash the phone again, use chunkheads knok unloking method...the do what I told You with nok tool1.9 ...hope thats help..
Regards!
Sergo_Zmeia

shaidi
03-10-2003, 03:43 AM
ok. this is freaking me out. i did want you told me. erased full flash. but whan i to flashed a 6210_0556_D in it, its telling either TX=HIGH or BAD PHONE RAM or something. sometime it works, but other time is doesnt. sometimes it works on the 5th try.
what im thinking with could be from the cable im using. i made it.

what do you think???

thanks