PDA

View Full Version : Lets gather all flash modifiying progs in 1 threed



kraze1984
02-10-2003, 12:25 PM
Hi folks!

Lets gather all the names of flash modifiying programs in one threed
(Not flashing\unlocking programs, but modifiying).
We can also post links to them here.
But not to commercial versions. Just those that are free (or demovers.).
I will not send send those versions to anybody nor cracks to them even if i had them.

I know those:

PPMMaker by Al (c later posts)
NFader by Al (c later posts)

joox's g3n0lite 0.9f, 0.9g
g3gg0's g3n0lite 1.7
g3gg0's g3n0lite 2.0 (c later posts)
ARMada 2.0 (clater posts)

FLSEdit 0.3
http://web13.brigado.biz/nokia/software/FLSEdit03.rar

FLSEdit 0.4 edited by eleoson
http://nokiafree.org/forums/attachment.php?attachmentid=4658

SecTone 1.0
http://nokiafree.org/forums/attachment.php?attachmentid=3887
This one seems to be the latest build

NokHex 1.04
http://www.gsm-funworld.de/nokia/software/NokHex104.rar

FlashTone Lite 2.10
http://www.gsm-funworld.de/nokia/software/FlashTone210.rar

ChkFixer and ChkKiller by Joox
http://www.gsm-funworld.de/nokia/software/ChkKiller.rar

0z0ne 1.1
http://g3gg0.dyndns.org/~geggo/nokia/0z0ne/0z0ne%20v1.1.exe

>edit 4.10.2003 - added links
>edit 7.10.2003 - moved some to l8r posts
- added link
>edit 9.10.2003 - added link
>edit 23.11.2003 - added atachments

Tracid
02-10-2003, 08:58 PM
Hi!
Could you send me Sectone to my e-mail?But not the demo version!
Thanx!

[email protected]

NokDoc
02-10-2003, 09:30 PM
Mr. Tracid,

Next time U're banned.

Mr. Kraze1984,

Adjust Ur wishlist.

NokDoc

kraze1984
03-10-2003, 01:33 PM
@NokDoc
Ok, i did it.

@Tracid
I said that i heard or know about the existance of such programs, not that i have them.

NokDoc
03-10-2003, 05:47 PM
Mr. Kraze1984,

>> We can also post links to them here.

Does not match these:

>> PPMEdit 1.0a -crk
>> PPMEdit 1.0g -commercial
>> SecTonePro 1.03 -commercial

Unless one of the makers (and fellow members) told U it's ok, I will refuse.

NokDoc

Twister
03-10-2003, 05:55 PM
Found this link:
http://www.gsm-funworld.de/nokia/software.php

hope this helps.

kraze1984
04-10-2003, 11:34 PM
Didn't know there was NFader 1.41...
Thx Twister

Who knows teh adress of Al's web-site?

SO:
FontEditor by yts (changes fonts like PPMEdit)
http://www.gsm-funworld.de/nokia/software/FontEditor02.zip

PPMMaker 1.6b by Al
http://www.gsm-funworld.de/nokia/software/PPMMaker106b.zip

NFader v.1.41 by Al (now with keypress interruption)
http://www.gsm-funworld.de/nokia/software/nfader141.zip

FlashGraphic 1.01 by Hasky
http://www.gsm-funworld.de/nokia/software/Flashgraphic.rar
(can change the React game background in 3210 :-) )

HexGraphic
http://www.gsm-funworld.de/nokia/software/HexGraph.rar

FLSEdit 0.3b (with 2100 support)
http://www.gsm-funworld.de/nokia/software/FLSEdit03b.zip

NokLangTran
INOCULATE
PPM Manager 0.91 beta
(all those rather old now)

NokZ0ne by Yummiee (like 0z0ne but with automatic offset finding)
http://www.gsm-funworld.de/nokia/software/Nokz0ne.exe

RTTL to RE converter
http://www.gsm-funworld.de/nokia/software/rttltore10b.zip

Tone ID changer by artangel96
http://www.gsm-funworld.de/nokia/software/ToneIDChanger.zip

Poodriver 1.1Beta (english) by FlyingMatze
[attached]

kraze1984
05-10-2003, 12:34 AM
jonjocker programs:
(his site http://www.jocker.netfirms.com)

JonNoks02 v.1.04
http://www.jocker.netfirms.com/jonnok02.zip

JonNoks v. 1.05(fixed)
http://www.jocker.netfirms.com/jonnoks.zip

JonNoks v. 1.06
http://www.jocker.netfirms.com/jonnoks6.zip

JonNoks v. 1.07 (tones function added)
http://www.jocker.netfirms.com/JonNoksv1.07.zip

JonNoks v. 1.08 (with overwrite function and no tones function)
http://www.jocker.netfirms.com/JonNoks%20V.1.08.zip

G3+4 (fixed) - adds 4 frames to the g3gg0's slideshow injected by g3n0lite v1.x
http://www.jocker.netfirms.com/slide+4.zip
(rightclick and then save as...)

SlidEdit 1.02
Edits g3gg0's frames, auto offset find (only for first 4 frames) not for G3+4's frames, u'll have to adjust.
http://www.jocker.netfirms.com/slids.zip

Space Impact Editor 1.01
Edits Space Impact game graphics (not the levels)
http://www.jocker.netfirms.com/jockerspace_.zip

asgaardro
06-10-2003, 01:46 AM
great work i'll try help
DDL linl for PODDRIVER ENGLISH VERISION 1.1 BETA
After downloading rename from .rar.zip to .rar and then unrar

kraze1984
06-10-2003, 12:38 PM
@asgaardro

PooDriver English is already posted in this thread.
The one you provided is w/o PooSetup.exe for
automatic offset finding.

But thx.

Crux
07-10-2003, 12:22 AM
gr8 list ppl
nice work

add this

flsedit
HexGraph102
nasNFCon
nfree13
NokHexPR6
sls3310
WinArm v1.6.3
Sectone Pro 1.03 (www.geocities.com/crux_pt/SecTonePro_v103.exe)

asgaardro
07-10-2003, 01:20 AM
Sectone Pro 1.03 (www.geocities.com/crux_pt/SecTonePro_v103.exe)
the don't work
pls post here only valid links

Crux
07-10-2003, 01:37 AM
sorry
will upload again

try again in 10 min

Crux
07-10-2003, 02:00 AM
sorry
will upload again

try again in 10 min


sorry
cant upload it

search here in the forum

try in my new group

http://groups.yahoo.com/group/Nokia_Admin/

natnat
07-10-2003, 03:34 AM
G3+4 (fixed) - adds 4 frames to the g3gg0's slideshow


anysoftware to automatically edit these frames???
like slidedit...

kraze1984
07-10-2003, 01:54 PM
Another one, found on the forum:

MCU Tool 1.0 by azywerks
http://nokiafree.org/forums/attachment.php?attachmentid=9688

@Crux2002
flsedit
HexGraph102
---------------> already in this threed, read carefully.

sls3310 - if its Space Impact Editor then also in this threed.
nasNFCon - what does it do?

asgaardro
07-10-2003, 11:37 PM
G3+4 (fixed) - adds 4 frames to the g3gg0's slideshow


anysoftware to automatically edit these frames???
like slidedit...
no
u must edit manual copy the offsets to slidedit v1.2 [local link] or pooddriver my link
and that it

asgaardro
07-10-2003, 11:50 PM
sorry
cant upload it

search here in the forum

try in my new group

http://groups.yahoo.com/group/Nokia_Admin/

if u whant u can send it to my email and i'll post it to my ftp and i'll post here the link
[email protected]

Crux
08-10-2003, 03:29 PM
if u whant u can send it to my email and i'll post it to my ftp and i'll post here the link
[email protected]


its already on my group, just sign in

sls3310 is "Stsrtup Logo Selector"

kraze1984
08-10-2003, 10:00 PM
sls3310 is "Stsrtup Logo Selector"

It works with the flashfile or directly with the fone?
If its the first case - then could you please post it here?

Crux
09-10-2003, 10:57 AM
It works with the flashfile or directly with the fone?
If its the first case - then could you please post it here?


direct to phone

i will post this apps in my yahoo group next night, when i got home

i'm at work now

kraze1984
09-10-2003, 02:39 PM
Snakepatcher and depatcher by krisha
http://web13.brigado.biz/nokia/software/Snakepatch.rar
Changes the flash, so that every score you get in Snake
becomes a hi-score.

kraze1984
13-10-2003, 11:59 AM
FixStrings 1.0 (8.10.2003) by [Yak]

This tool fixes menu strings inserted into flash file by g3n0lite program.
It replaces all \x?? with their apropriate values. Especialy usefull when
you want to use unicode characters.

http://nokiafree.org/forums/attachment.php?attachmentid=9706 -11 Kb

U will also need a Delphi libraries vcl60.bpl, rtl60.bpl, borlndmm.dll, cc3260mt.dll
http://psv00.newmail.ru/cpp60.zip -1165 Kb

paskee
16-10-2003, 10:38 AM
maybe you can add this in your software collection flash space manager, IMEI Generator etc. (http://groups.yahoo.com/group/Paskee_Group/files/nokia%20%20software)

Dex83
16-10-2003, 11:47 AM
Hi folks!

Lets gather all the names of flash modifiying programs in one threed
(Not flashing\unlocking programs, but modifiying).
We can also post links to them here.
But not to commercial versions. Just those that are free (or demovers.).
I will not send send those versions to anybody nor cracks to them even if i had them.

I know those:

PPMMaker by Al (c later posts)
NFader by Al (c later posts)

joox's g3n0lite 0.9f, 0.9g
g3gg0's g3n0lite 1.7, 2.0
ARMada 2.0

FLSEdit 0.3
http://web13.brigado.biz/nokia/software/FLSEdit03.rar

FLSEdit 0.4 edited by eleoson
http://nokiafree.org/forums/attachment.php?attachmentid=4658

SecTone 1.0
http://nokiafree.org/forums/attachment.php?attachmentid=3887
This one seems to be the latest build

NokHex 1.04
http://www.gsm-funworld.de/nokia/software/NokHex104.rar

FlashTone Lite 2.10
http://www.gsm-funworld.de/nokia/software/FlashTone210.rar

ChkFixer and ChkKiller by Joox
http://www.gsm-funworld.de/nokia/software/ChkKiller.rar

0z0ne 1.1
http://g3gg0.dyndns.org/~geggo/nokia/0z0ne/0z0ne%20v1.1.exe

>edit 4.10.2003 - added links
>edit 7.10.2003 - moved some to l8r posts
- added link
>edit 9.10.2003 - added link






Are this files run using only windows 95?

Please reply.....
thanks!

kraze1984
16-10-2003, 10:10 PM
They run in Windows 2000 100% (@ me)
I think that they run in every version of Windows.

Crux
16-10-2003, 11:05 PM
im running all on windows xp
no problem :)

Dex83
17-10-2003, 07:48 AM
adding Vb6.0 runtime will do if ur using win95?

kraze1984
17-10-2003, 09:58 AM
adding Vb6.0 runtime will do if ur using win95?
Ah, yes. In Win95 there are many libraries missing, that are present in further versions of Windows.
1. Just run the program,
2. when it asks for the missing library, note its name,
3. search the Internet.
4. Download the file,
5. copy it to the Windows\System directory or to directory with the
program.
6. GOTO STEP 1 :)

Note: Some libraries need rgistering with the command REGSVR32 <name_of_lib>. The program REGSVR32.exe is located in Windows\System directory.

Or find a program, that can view what libraries the program can use (i used eXeScope v. 6 )

kraze1984
17-10-2003, 10:06 AM
maybe you can add this in your software collection flash space manager, IMEI Generator etc. (http://groups.yahoo.com/group/Paskee_Group/files/nokia%20%20software)
I visited your group.
Well, flash space manager, and the patcher fit the requirements. I'll upload them here if u allow? (i'm not sure in the meaning of this word) me.

P.S. Sorry for a weak English :)

paskee
18-10-2003, 11:35 AM
I visited your group.
Well, flash space manager, and the patcher fit the requirements. I'll upload them here if u allow? (i'm not sure in the meaning of this word) me.

P.S. Sorry for a weak English :)


why not, idont own those softwares, i think, the author of those software will allow also, cause they distribute those softwares for free

kraze1984
18-10-2003, 10:10 PM
Ok, thanx

So the programs (attached)

Left_upward_return SlideShow Patcher for Nokia 3310 v.5.79;

Flash Space Manager
(needs MSCOMCT2.OCX registered
http://www.gis-lab.info/other/MSCOMCT2.ZIP)
(to register the library, copy it to your windows\system or winnt\system32 directory and "RUN" regsvr32 mscomct2.ocx)

Dex83
19-10-2003, 10:44 AM
I've downloaded Rolis 4.78 flasher, when im trying to run it it won't show up? i only have my old computer, about 133mhz with 16mb ram... do my computer capable of flashing?

By the way thanks 4 reply... ive downloaded all libraries neede to run those apps.

thanks!!!!! :D

sirpaul1
19-10-2003, 02:17 PM
I've downloaded Rolis 4.78 flasher, when im trying to run it it won't show up? i only have my old computer, about 133mhz with 16mb ram... do my computer capable of flashing?

By the way thanks 4 reply... ive downloaded all libraries neede to run those apps.

thanks!!!!! :D


I have a couple of old computers floating around at work and places, I have been unable to get rollis to work on them. I have how ever been able to use Knok Lead's Build 1 on both of them. On an antique laptop this takes roughly 45mins-1hr to read/write the flash

kraze1984
20-10-2003, 01:57 PM
!!!!!!!!!!!!!
Please post here only concerning flash modifiing programs!
!!!!!!!!!!!!!

New program by Spaceimpact33 based on FLSEdit code by joox
http://nokiafree.org/forums/attachment.php?attachmentid=9744

Allows to change the main menu fonts' size and alignement
(for those who don't know how to do it manually :) )

JeffHack
25-10-2003, 06:42 AM
I've downloaded Rolis 4.78 flasher, when im trying to run it it won't show up? i only have my old computer, about 133mhz with 16mb ram... do my computer capable of flashing?

By the way thanks 4 reply... ive downloaded all libraries neede to run those apps.

thanks!!!!! :D
:lol: :lol: :lol
HaHaHaHAHAHAHAHAHAHHAHAAH
ITAPON mo nA YAng Computer Mo!!!!!
I LOve You LYMA!!!!!!
HAHAHAHAHAHAHHAH

kraze1984
26-10-2003, 08:29 PM
Updated link for VCL libraries for FixStrings 1.0 by Yak
(http://nokiafree.org/forums/attachment.php?attachmentid=9706):

Right-click ->Save As
http://web.tiscali.it/no-redirect-tiscali/sbordoni/Stefano/files/vcl6rtl.zip
(Much faster download and smaller size)

p.S. seems that this threed dies......

Edit> No, it's alive !!!!!
This pack is also needed if you have problems running SlideTweak 1.2

yak
06-11-2003, 09:22 PM
Hi everybody!

I've just finished writing new software for all of us!

SlideTweak 1.2 (7.11.2003)
Copyright (c) 2003 [Yak]

With this tool you can customize slideshows added to NOKIA DCT3 flashfiles with g3n0lite 2.0 program! You can have any number of frames and any number of slideshow commands! Of course it depends also on how much of free space there is in your flashfile.

Requierments:

- PC with Windows,
- Borland runtime libraries,
- Graphic editor able to convert graphic to HEX (HexGraph for example),
- g3n0lite 2.0,
- some knowledge on flashfiles modifying and g3n0lite usage.

Documentation in english included!

Have fun!
[Yak]

Crux
06-11-2003, 09:37 PM
seems a good tool. will try as soon as i can

kraze1984
07-11-2003, 01:25 AM
Thank you VERY much, Yak for giving us this tool.
If it works as u described it'll be an easy tool for creating demos on
the DCT-3 fones.

And of course a HUUUUUGE thanx to g3gg0 for his g3n0lite!!!!!!

I'll try it on weekend on my 3210

Crux
07-11-2003, 01:44 AM
i dont understand this program.

@yak

can u explain us how it works?

yak
07-11-2003, 04:33 AM
There is a new version of SlideTweak!
SlideTweak 1.2 (http://nokiafree.org/forums/attachment.php?attachmentid=9896)

Don't use version 1.0 and 1.1 anymore! They're buggy! There are errors in GSC files created by it.

Version 1.2 is fully functional at last! Additionaly it has also new features. It can overwrite original 4 frames to save some flash-space. There is also a new slideshow command (not described in g3n0lite's "Read 1st" window!) causing the bitmap do scroll-in diagonaly!

Demo included.

@ Crux2002

Why I wrote SlideTweak...

The slideshows created by g3n0lite 2.0 use a special commands table to describe the slideshow. Thanks to it you can decide when and how your frames will show up. It was there since g3n0lite's 2.0 release but everybody just replaced those built-in 4 frames (there were some tools allowing to have 8 frames, but that's all!). Now, with SlideTweak, you can create your own command table with any number of frames. Then, everything is saved in GSC file (g3n0lite patch script) and you can apply it using g3n0lite - it will find place for your frames and new tables in the flash and set the pointers to tables in already applied 'Slideshow'/'Intro' patches.

Hope this makes everything clear... :))

Greetings to everybody... hope to see lots of SlideTweak generated GSC files with cool demos floating around the net...

spaceimpact33
07-11-2003, 01:22 PM
just my little progie,

this program is built on fls edit engine (ppm and mcu reading) by joox
changes the font selected in the main menu as seen in project z rc1

use font0 for the main font eg large bold
use the others for other fonts eg small plane

to find out wot font is wot check ppmedit or an other font editing program.

thanx for looking :)
spaceimpact33
file attached below

paskee
15-11-2003, 09:21 AM
There is a new version of SlideTweak!
SlideTweak 1.2 (http://nokiafree.org/forums/attachment.php?attachmentid=9896)

Don't use version 1.0 and 1.1 anymore! They're buggy! There are errors in GSC files created by it.

Version 1.2 is fully functional at last! Additionaly it has also new features. It can overwrite original 4 frames to save some flash-space. There is also a new slideshow command (not described in g3n0lite's "Read 1st" window!) causing the bitmap do scroll-in diagonaly!

Demo included.

@ Crux2002

Why I wrote SlideTweak...

The slideshows created by g3n0lite 2.0 use a special commands table to describe the slideshow. Thanks to it you can decide when and how your frames will show up. It was there since g3n0lite's 2.0 release but everybody just replaced those built-in 4 frames (there were some tools allowing to have 8 frames, but that's all!). Now, with SlideTweak, you can create your own command table with any number of frames. Then, everything is saved in GSC file (g3n0lite patch script) and you can apply it using g3n0lite - it will find place for your frames and new tables in the flash and set the pointers to tables in already applied 'Slideshow'/'Intro' patches.

Hope this makes everything clear... :))

Greetings to everybody... hope to see lots of SlideTweak generated GSC files with cool demos floating around the net...



sir when I run slidetweak, asking for dll file "VCL60.BPL", where can i get this file

vikingboy
15-11-2003, 12:20 PM
sir when I run slidetweak, asking for dll file "VCL60.BPL", where can i get this file

step 1 - search google for "borland runtimes"
step 2 - download the whole package of borland runtime libraries (its about 3.5 MB)
step 3 - extract the required .bpl files ( whose names slidetweak shows in error) into your windows>system directory
step4 - run slidetweak :)

cheers!!
vikas

paskee
15-11-2003, 04:26 PM
step 1 - search google for "borland runtimes"
step 2 - download the whole package of borland runtime libraries (its about 3.5 MB)
step 3 - extract the required .bpl files ( whose names slidetweak shows in error) into your windows>system directory
step4 - run slidetweak :)

cheers!!
vikas


sir can youpost the link I cannot find it in goggle, I found one but dont include what is needed by slidetweak

Crux
16-11-2003, 06:15 AM
http://nokiafree.org/forums/showpost.php?p=220232&postcount=37

u need glasses 8-)

paskee
16-11-2003, 09:30 AM
http://nokiafree.org/forums/showpost.php?p=220232&postcount=37

u need glasses 8-)



thanks for the link

kraze1984
23-11-2003, 11:20 PM
The g3n0lite 2 with all the .gsc's

Whats in:
g3n0lite 2.0
ARMada 2.0
minutebeep.gsc
clock.gsc
dataviewer.gsc
spymode.gsc
shortkey_main.gsc
fastinvert.gsc
fastspy.gsc
a little info on how to not turn out leds with spymode (in german)

Modified a bit late: the 4>7 patch is released, by Yak. c latr posts
Later change: More patches are released, c latr posts

Crux
24-11-2003, 02:07 AM
hi. u forgot 2 scripts

therock
24-11-2003, 03:53 AM
What's the difference between spy mode and fast spy?And what does data view and netgraph do?Thanx in advamce.

kraze1984
24-11-2003, 02:36 PM
What's the difference between spy mode and fast spy?And what does data view and netgraph do?Thanx in advamce.

the fast spy is used to turn on and off the spy mode function in your phone, the spymode patch is used to insert the spy mode in your fone. They are like a lamp and a switch.

Data view allows u to view all the containence of flash chip on your fone in hex.

Netgraph shows a graphics of the RX signal received by your fone

grrreets

kraze1984
26-11-2003, 02:01 PM
hi. u forgot 2 scripts

From where did u get them?

Are they from www.gsmfreeboard.com?

thanks.

kraze1984
26-11-2003, 02:27 PM
Another .gsc from krisha:
The EEPROM viewer (like the dataviewer but for EEPROM)
Must be also functional with external EEPROM (like 5110 and 3210)

taken from gsmfreeboard.com

About keypresses:
for making it and dataviewer work on 3210, 8210 see this threed:
http://nokiafree.org/forums/showpost.php?p=235839&postcount=299

natnat
26-11-2003, 07:15 PM
yup!

very nice program but i have a problem using hexgraph. that is, i dont know how to use it!

thanks anyways. i know i can figure it out soon...

asgaardro
27-11-2003, 01:23 AM
new .gsc files taken from gsmfreeboard.com

natnat
27-11-2003, 04:47 AM
@asgaardro

what are these two gsc files all about???

thanks!

asgaardro
28-11-2003, 01:05 AM
@natnat
don't know i only found it i dont have a 3310 to test it i have 3410 and g3nolte has no support for this phone

kraze1984
28-11-2003, 03:12 PM
@asgaardro

what are these two gsc files all about???

thanks!

just view each with notepad !

the first is to make the fone answering on a call by pressing any key
the other has deal with some registers (it concerns ASM programming). I don't think it is very usefull for end-users, just for programmers, which develop their own patches.

grrreets

ToneMan
02-12-2003, 07:34 AM
my program :-P

kraze1984
02-12-2003, 10:51 PM
The program re2rttl by Toneman may need a newer mci32.ocx file. here it is:

copy it to your windows\system or winnt\system32 folder

kraze1984
31-12-2003, 01:20 AM
Here again after a month's absence.

check 4>7 bars gsc's at yak's page:
http://www.yak.prv.pl/true7bars

eleoson finally released his SecTonePro as freeware:
http://nokiafree.org/forums/attachment.php?attachmentid=10415

zul7234
03-01-2004, 06:59 AM
Greeting to all.

I want to add extra menu only for this function rhythmic light & fading light in my n3310.
so I need some working .gsc files for rhythmic lights and fading light.
I'm not good enough to create it on my own .

Thanks.

Crux
03-01-2004, 01:06 PM
no u dont

use g3n0lite

it already has the requested funcs

select Fading+Rhytmic+create 5e0

then use 5e0 to create the menu as u said

and then post in right section

zul7234
03-01-2004, 03:23 PM
@Crux2002

I tried you suggestion but still i don't get the menu to turn rhythmic and fading ligt on/off. The rhythmic light worked when i play the tones but the fading light is not working. I used mcu&ppm n3310 v6.07.


Thanks.

jebat
03-01-2004, 05:49 PM
@zul7234
for making menu you better search through g3n0lite v2.0 thread
you can learn more in that thread

there are many Q&A about menus

and for making menu we dont use special gsc
you can find gsc for making menus
coz 5e0 table is different with a phone and another


------------ cuba cari dalam topik tu mesti jumpa
translation (try to find inside that topic,sure to find)

[RedHat]
24-01-2004, 05:10 PM
@Crux2002

I tried you suggestion but still i don't get the menu to turn rhythmic and fading ligt on/off. The rhythmic light worked when i play the tones but the fading light is not working. I used mcu&ppm n3310 v6.07.


Thanks.


Just try to search the forum on how to make the menu for the fading light and the rythmic light. Or you can search the web for smarkies's tutorial for genolite. It is very useful and i used it to. :D

zul7234
25-01-2004, 05:17 AM
']Just try to search the forum on how to make the menu for the fading light and the rythmic light. Or you can search the web for smarkies's tutorial for genolite. It is very useful and i used it to. :D

Got everything working now, except i only can make the menu as root menu not the submenu under setting. When i make it as submenu, e.g, under setting-extra setting, the 5e0 function not working. It goes blank then stuck there for a few second and reset itself. BTW,i've already increase the rootmenu counter etc. still not working.

???

danwood76
25-01-2004, 08:44 AM
Got everything working now, except i only can make the menu as root menu not the submenu under setting. When i make it as submenu, e.g, under setting-extra setting, the 5e0 function not working. It goes blank then stuck there for a few second and reset itself. BTW,i've already increase the rootmenu counter etc. still not working.

???

When you create sub menus make sure that the counter in the line before the menu has the correct number of sub menu counters

When I create another menu I just copy a part of say the messages menu and change the text 5e0 table and animations etc. accordingly

wbr
Danny

[RedHat]
26-01-2004, 08:00 AM
Got everything working now, except i only can make the menu as root menu not the submenu under setting. When i make it as submenu, e.g, under setting-extra setting, the 5e0 function not working. It goes blank then stuck there for a few second and reset itself. BTW,i've already increase the rootmenu counter etc. still not working.

???

Last time i also encountered a problem which is my menu hangs when entering the extra setting under setting submenu. What I did is just do a factory reset on Knok and all went well. That is just a suggestion but it work for me. Just try it. Just do that after you Update faid and. And also convert 3310 to 3315 to get the 3315 menu.

Hope that works for you

zul7234
26-01-2004, 05:50 PM
']Last time i also encountered a problem which is my menu hangs when entering the extra setting under setting submenu. What I did is just do a factory reset on Knok and all went well. That is just a suggestion but it work for me. Just try it. Just do that after you Update faid and. And also convert 3310 to 3315 to get the 3315 menu.

Hope that works for you

Thanks for the suggestion. I'll try it later.

kraze1984
27-01-2004, 12:15 AM
New .gsc script by yak which allows u to protect by password some menus:
- Messages Inbox
- Messages Outbox
- Erase messages menu (if it exists)
- Reminders menu (if it exists)

The patch doesn't affect security settings menu and can be enabled\disabled via fone's menu.

http://nokiafree.org/forums/attachment.php?attachmentid=10715

cjard
27-01-2004, 12:31 PM
Another one, found on the forum:

nasNFCon - what does it do?

very slick program for joining MCU+PPM, splitting MCU+PPM and calculating checksums.. Doesnt sound like a lot, but its just a nice program because it is very professionally put together, not the usual amateur looking stuffs (that most of the scene produces; no offence!)

Im looking for it actually.. so if you have...

danwood76
27-01-2004, 08:29 PM
Here it is

kraze1984
27-01-2004, 10:58 PM
Check yak's page http://www.yak.prv.pl/nokia

There are some interesting .gsc's:
Fastwatch - a watch that shows date, time, day of the week
Call duration - draws the duration of current call on the screen

Some .gsc's connected with menu strings:
fix_5e0
count_ppm_strings
menu_strings_from_ppm
- interesting for those who create multilingual mods

BOEBOE
27-01-2004, 11:51 PM
WOW

Add texts to PPM

No more messing around with differents flashes!

Why didn't he put those things in a new thread??

Now I can finish ProjecT 3310 1.0

Crux
28-01-2004, 11:03 PM
he already posted it

kraze1984
11-02-2004, 01:31 PM
Some really phone specific .gsc scripts:

mTonez7to16 for Nokia 3310 v.5.79
by NokDoc and Kontact
http://nokiafree.org/forums/attachment.php?attachmentid=10999

mTonez7to16 for Nokia 3310 v.6.07
by NokDoc and Contact, modified by Tongs
http://nokiafree.org/forums/attachment.php?attachmentid=11272

mTonez7to16 for Nokia 331x v.1.1
Next modification by Tongs
http://nokiafree.org/forums/attachment.php?attachmentid=11749

Those ones add 9 OTA (Over The Air) ringtones to your Nokia 3310.

boy_liit
26-02-2004, 05:10 AM
hi kraze1984, can u post a tutorial on modifyng 3310 flash files?, software used and tutorials for newbies. thnx, this is my email add.. [email protected]

sirhc
07-03-2004, 05:34 AM
WinRar + Crack
same as WinZIP...

NO CRACKS ALLOWED

zul7234
07-03-2004, 10:45 AM
Greeting.

Has someone here came across a program called PMM READER ? Where can i download this program if it really exist ? I was told by someone in this forum that this program is suppose to be able read pmm information including the downloaded ringtones.(in HEX format)

Thanks.

kraze1984
22-03-2004, 03:29 PM
New version of g3n0lite - g3n0lite 2.2 compiled by Crux from sources released by g3gg0 on CVS:

http://nokiafree.org/forums/attachment.php?attachmentid=11998

Added Protect function (didn't tested it for now).

New .gsc's (Still in beta state):
MinuteBeep & AnyKeyAnswer With On/Off Capabilities [Edited By THE-MATRIX], a script to add blinkin and linefeed char.
http://nokiafree.org/forums/attachment.php?attachmentid=11747

The first two .gsc's have some side effects, like Contact Service, after battery is removed (3310 v.6.07 only?).

The second script works only on 3310.

kraze1984
22-03-2004, 03:43 PM
A Flash Editor.
"FlashMaster2k4" by Veikka.
v.0.01

Well, there were no new flash editors this last time.
This one has many features integrated (for which you had to use other programs):
-Bitmap edit
-Menu structure edit
-Language edit
-Ringtone edit
-DisplayZone edit
-Font edit
-Character set edit
-Operators edit
-PATCH option:
--Clock screensaver (thanks to krisha)
--4 to 7 net/batt bars (thanks to Yak).
Homepage:http://www.geocities.com/nokiafm2k4/
Thread:http://nokiafree.org/forums/t53600/h/s.html
Maybe u'll need COMMDLG32.OCX - search GOOGLE :)

mistery
24-03-2004, 01:10 AM
does anyone know how to modify a phone like GSM-ID on the following page

http://www.spystoreuk.com/Audiosp.html

kraze1984
24-03-2004, 03:14 PM
does anyone know how to modify a phone like GSM-ID on the following page

http://www.spystoreuk.com/Audiosp.html

This question was many times discussed on the forum. You can apply a patch, when there's nothing visible on the screen (all is blackened) and that's all (http://nokiafree.org/forums/showpost.php?p=234466&postcount=49).

mistery
24-03-2004, 03:46 PM
This question was many times discussed on the forum. You can apply a patch, when there's nothing visible on the screen (all is blackened) and that's all (http://nokiafree.org/forums/showpost.php?p=234466&postcount=49).

I mean, is it possible to program a special phone number that will activate spymode through the caller ID ?
It seems that the spymode.gsc doesn't do this...

danwood76
24-03-2004, 07:31 PM
--4 to 7 net/batt bars (thanks to Yak).



4 to 7 net bars possibly thanks to nokdoc and kontact also??

kraze1984
24-03-2004, 10:49 PM
4 to 7 net bars possibly thanks to nokdoc and kontact also??

It's what was written on the program's site :-o
I know sure, that it's work of nokdoc, kontact, yak and others (me including :D ) but maybe the author wanted to say, that he used data from krisha's gsc to make the patch ???

NokDoc
24-03-2004, 11:15 PM
Hi,

Guys, no need to mention this.

I not mind such things, as long as people don't start doing it for the wrong purpose.

NokDoc

kraze1984
24-03-2004, 11:28 PM
ok, ok, no offence.

kraze1984
25-03-2004, 12:18 AM
FlashMaster2k4 updated.
28-03-04: New update
check http://www.geocities.com/nokiafm2k4/

ejvital
26-03-2004, 03:54 AM
sir,

where can i find 3310 flash file than can be modified (except for 6.07 and 6.33)

tnx

ejvital

bradysarlo
26-03-2004, 08:26 AM
------
v5.57 (http://www.cubwolf.co.uk/upgrades/3310v557.zip)
------