startup and shutdown ringtone!!

[jdx1883]

can somebody teach me how to add a startup and shutdown ringtone? thanks u

[stallone1]

if u found out how to make it kindly email me .thanks

[Visar Mato]

3210 v6.00
000DC095 (length 0x68)

3310 v5.55
0011BE3D (length 0xB0)

3310 v5.57
0011BE05 (length 0xB0)

5110 v5.30 ROM4
000A6625 (length 0x68)

just don't change the first 5 bytes... which is "C0 46 C0 00 02"... then leave at least three bytes for "0A FE 0B" at the end of the tones... if you don't consume all the length bytes... or the tones is less in bytes... just padded FFs at the end...

calc the checksum in PPMANAGER..

[chandman]

so wat do u do then :rolleyes:

[welshwizard]

thanks 4 that.... will search in my 6210 4 1 now. :D what format is it in?

*.re / *.bin / *.what?

if it is only in hex.... which code means which notes please?

[chandman]

welshwizard
do u know how do it for the 3310 5.57 or where to satrt looking

[welshwizard]

i havent got a clue what i'm doing....

i wouldnt do it with 5.57 (hard checksums) downgrade 2 5.55

(chandman, i thought u was the man with this sort of thing or am i thinking of sum1 else?)

[welshwizard]

"... then leave at least three bytes for "0A FE 0B" at the end of the tones...


This is the bit i dont undrstand..... i dont have 0A FE 0B at the end, or do i have 2 put that there?

HHEELLPP

[chandman]

welshwizard
nar i just have the flashfile with it already on but the flashfile is good but crap lol

so i just use the 1 i made my self

[welshwizard]

i just had the tone "Do-Me-So" as a startup & shutdown thing except it messed up.....

. = Do
- = Me
* = So

it went....

. - *. - * . - ***********


it sounds crappy!!! :D :rolleyes: :p

[chandman]

so wat u do or where do i start

3310 v5.57
0011BE05 (length 0xB0)

with these :(

[welshwizard]

dont use 5.57 - calculate faid is hard.

use 5.55

get hex workshop from my site - thats a start :)

[chandman]

lol ok got that now wot

[Liam]

This is over my head... I got data after the "C0 46 C0 00 02" in my 557 flash, can I just overwrite this...?

How many notes can we add?
Do i just rip the notes from the note section of an RE file and paste them in or is there something else I should do?

[GeeZuZz]

Liam: good question -

How do we get the notes?

[stallone1]

how to change the startup logo to animation use what software needed? thank you:(

[Visar Mato]

Is the same thing as making a screen saver..
i did it once in logo manager
regards

[jdx1883]

can somebody let me know wat is the address for 8210 8850 8250 for startup and shutdown ringtone?

[stallone1]

Originally posted by Visar Mato
Is the same thing as making a screen saver..
i did it once in logo manager
regards



Logomanager cant make start up logo with animation , only can make screen saver with animation

[madman]

Originally posted by jdx1883
can somebody let me know wat is the address for 8210 8850 8250 for startup and shutdown ringtone?

Can some 1 PLEASE answer that question? And you can use LogoManager to make the individual frames for a start up logo

[NokiaPhreak]

8210 v5.31 offset 00136751
8250 v5.04 offset 0012dc75

Have fun.

Don't know whether can made this ringtone range a bit longer or not, maybe some guniee know, if you know please post.

Thanks you.

[pedjulino]

@NokiaPhreak

Thanx for Info my friend:)

regards


P.S.NokiaPhreak please answer my on PM

[madman]

Thank you. Safe mate. I finally understand what to do now

[stallone1]

Originally posted by NokiaPhreak
8210 v5.31 offset 00136751
8250 v5.04 offset 0012dc75

Have fun.

Don't know whether can made this ringtone range a bit longer or not, maybe some guniee know, if you know please post.

Thanks you.



Hi Nokiaphreak,

Like 3310 i use Hex edit i can find this line and change but for the 8250 as you say i cannot find the 8250 v5.04 offset 0012dc75, use what program and how to change the tone?

3310 v5.55
0011BE3D (length 0xB0)

3310 v5.57
0011BE05 (length 0xB0)

[stallone1]

Hi NokiaPhreak if possible kindly posted one 8210 and 8250 (h) version PPM+MCU and we can just download and explore the data file and know how u make it .Thank you

[stallone1]

http://www.i-phone.org/8250k504Coolstartuptone.zip

hi guys if u wan the cool start up tone download it at here but i am still finding how to make the start up logo .Thank is any one can tell me

[stallone1]

Need longer ringtone for the Power ON/OFF tone download at this link :)



http://www.i-phone.net.my/LongerTONE-0557.zip

[madman]

u're startup logo is kinda dope. The only fing I don't like about u're flash is the menu graphics and the flashin menu's and txt. If you want an 8250 MCU-PPM with 8210 Graphics I'd proudly give u the link

[madman]

stallone1. ya c were it says DPLAG.....Downtown do you change that to the ringtone you want as the startup tone?

[mimmy228]

stallone1,
when i press *#0000# it shows V07.00 i-Phone.
how did you change it?

[stallone1]

when i press *#0000# it shows V07.00 i-Phone.
how did you change it? <== this use hexedit or ultraedit to change it after change use PPM manager CRC and its done.



madman <== yes i change that downtown tone i want :)

[stallone1]

Hi madman



Kindly give me the LInk :) of the 8210 graphic

[NokiaPhreak]

@stallone1

I've try your modification, but didn't you know that the caller group menu didn't function properly? And there is only 4 composer ringtone left.

I think for 82xx, 62 ringtone is the border.

[jasonlau]

NokiaPhreak is right, the caller group is not working.
Btw, is that mean the maximum ringtones+composer = 67 ?
I tried to go in Composer and there are 6 tones.
It will only display top 4 tones when you choose your ringtones

Cheers

[stallone1]

yes the caller group is not functioning any help ?
maybe its becuase insert too many ringtone?

[NokiaPhreak]

@stallone1, jasonlau

Try remove language you don't use, I remove 2 language and now I'm having 68 with all other menu working properly.

[madman]

stallone1 tell me wen u need the 8250 graphics.

[gazzaman2k]

63 tones 57 inbuilt and 6 composer

on a 8250 v5.04j pack

[Manipulator]

Originally posted by gazzaman2k
63 tones 57 inbuilt and 6 composer

on a 8250 v5.04j pack

can you send it to me [email protected]

thanks in advance:)

[stallone1]

Originally posted by madman
stallone1 tell me wen u need the 8250 graphics.


i need it as soon as possible :)

[jasonlau]

@NokiaPhreak

i removed 3 tones and it works for me.
60 default + 6 composed = 66ringtones
Caller Group is working properly now.

[Manipulator]

Originally posted by jasonlau
@NokiaPhreak

i removed 3 tones and it works for me.
60 default + 6 composed = 66ringtones
Caller Group is working properly now.

can you send the file to me [email protected]

thanks in advance:cool: :cool:

[mimmy228]

Thanks,stalone1

After i edit in my name (i'm using HEXEDIT),i saved it, but when i try CRC, i can't open file.

Can U pls guide me through?

MILLIONNN....THANX:) :) :) ............

[victor]

How do i edit the offset?

Any programs?

Please Advice

[Harry Zhily]

Edit Start UP Logo animation

Hi There...

just curious... the Start adress of startup animation on 8210/8250, anybody know....???
I think the 8250 didn't have much layer on startup animation...

I found on 3310 V05.57 Startup Logo have 7 layer for default Nokia startup Logo, 8 Layer on Draft Nokia Startup Logo, and 8 layer on Nokia iteneris Startup Logo. Anybody know the Start address to Add more Layer on startup Logo animation.( make it 10-11 layer)

I've tried to find the address for 8250 but can't find it yet... any suggestion....??

BTW i used NokHex 104

Thanks...

[madman]

ere u go stallone1. http://groups.yahoo.com/group/madman_inc/files/Conversion%20Flashes/8210%20-%208250/Modified%208250%20MCU%20and%20PPM%20for%208210/ the startup tone is totally fluckred up. But I'm sure u can sort it easily as u only want it for the graphics.

MadMan

[madman]

I tried changin the start up tone but I get a crap error wen I try to flash it about file size

[stallone1]

Originally posted by mimmy228
Thanks,stalone1

After i edit in my name (i'm using HEXEDIT),i saved it, but when i try CRC, i can't open file.

Can U pls guide me through?

MILLIONNN....THANX:) :) :) ............


after use hex edit it then save it and then close ur hex edit program ans use ppm manager

[chandman]

stallone1

do u know how to do the tone :rolleyes:

[Visar Mato]

anyone know the ofset of Start tone at Nokia 8890 1220
Regards

[gazzaman2k]

3330 v4.16 offset for startup tone thx

[madman]

wat do I use to convert my tones to .re on Windows XP?

[pedjulino]

I don't know guys,i am try add startup ringtone in my Nokia 5110 but i haven't lucky i have only CONTACT SERVICE i don't know what is problem?

best regards

[stallone1]

check sum your data file be4 flashing it to ur phone

[mimmy228]

[QUOTE]Originally posted by stallone1



after use hex edit it then save it and then close ur hex edit program ans use ppm manager [/QUOTE

Stalone1,you edit the MCU only or MCU+PPM?
Can you simply add in any name or with limits?
and i cannot open the .fls 4 CRCs ,why?

[jdx1883]

hello..does any know how to add a long start & shut ringtone in any nokia hp..? thanks u ...