PDA

View Full Version : Contact Service



MCCOY
04-10-2003, 07:03 AM
I have a 2100 which I guest its contact service, it has blank screen once u turn it on and u cant turn it off using d switch, u have to take off d battery to turn it off. I already flash it with Knok but still the same problem. :-? Please could anyone help me with this problem?

Tnx
Mccoy

[email protected]

Software is like sex, it is better if its free......

aamszia
04-10-2003, 07:20 PM
Its very Simple to solve this prob.
If You are using Knok Phoenix

Instruction are fellows :

1) Select 2100 Model.
2) Go to Erase Option & Do "ERASE WHOLE FLASH"
3) Then again goto Erase Option & do "ERASE FLASH"
4) Then goto Write option & "WRITE FLS TO THE PHONE"
Its to be sure that FLS file is good & Perfect.
4) After Flashing the fone
1) SET QUICK FAID
2) RESET SP LOCKS.
3) WRITE NEW IMEI ( from the back of the Fone).
5) Then if needed , do "ALL ABOVE"

Your 2100 will be 100% OK

Best of LUCK.

Thank You

danwood76
05-10-2003, 10:11 AM
What you need to do is read the entire flash off the phone with nokia flasher by rollis!
It is probably the best proggy for the job!

then when you have read it save to a suitable location open a checksum repair prog like nasFcon or nfree 1.2 fix all the checksums and re-flash to your phone, this should solve your problem

always refer to the FAQ, they have a tutorial on contact service

kianlip
04-11-2003, 07:03 AM
i got the new flasher for 2100, if you want it, just email me :[email protected].

aamszia
05-11-2003, 03:34 PM
Yes,
I want the new Flasher
Plz upload it
So I can take it.

Waiting for reply

TokeiLampin
10-11-2003, 01:16 AM
Why u not use eeprom tools first and check what problem with that phone maybe just serial cobba problem and probaly can be fix with that software