PDA

View Full Version : Nokia 6200 unlock code please


joekd
18-10-2003, 11:12 AM
Nokia 6200, was an AT&T phone, going to be used for Cingular

IMEI 351509/00/055514/9

Also, will unocking get rid of the AT&T M-life settings or is there another way to remove those?

Thanks for all the help
browntoa
18-10-2003, 11:17 AM
#pw+983942413161042+1#


will come back about the other thing...
joekd
18-10-2003, 11:20 AM
Thanks for the quick reply

I entered the code and the display says it is not restricted yet the phone will still not work with my Cingular SIMs

Any other suggestions?
crashynot
18-10-2003, 11:29 AM
Wat does it say when you put the othe sim Card in ??
post reply
joekd
18-10-2003, 11:36 AM
it recognizes the SIM has been inserted (insert SIM message is gone, full power up) but will not allow calls and shows no network signals on main screen

I have tried with both of my Cingular SIMs with the same results

note:
-I have also tried changing the Nokia security level to off
-during power up the aforementioned AT&T Mlife display still shows
crashynot
18-10-2003, 11:39 AM
With the original sim or an other sim does it do the same ?
Sound to me the fone could be Barred!!
joekd
18-10-2003, 11:42 AM
With the original sim or an other sim does it do the same ?
Sound to me the fone could be Barred!!

I do not have the original SIM, only the two Cingular ones

Can you explain what barred means?
crashynot
18-10-2003, 11:49 AM
This meesn that the fone can be reported stolen or lost
and the network blocked it
joekd
18-10-2003, 11:54 AM
is there anyway to verify if this unit is truly barred? Although the phone was brand new in a sealed AT&T package I understand that it could still be stolen and would like confirm that before starting a dispute with the retailer.

BTW - thanks for all the great info
crashynot
18-10-2003, 11:57 AM
Just call the network and post your problem the might
tell if it is stolen or not but .....you might loose the fone if it is !!
shohoku1234
19-10-2003, 03:32 AM
Hum.. I have alot of problem unlocking Cingular 6200 with 31017. Any idea?
browntoa
19-10-2003, 09:39 AM
Hum.. I have alot of problem unlocking Cingular 6200 with 31017. Any idea?

no...code is correct...might be worth reading it from the phone to make sure it is the right one

I believe the MYKE dtc4 unlocker does this with a data cable