question of the cable and software.

[bean]

I have a cable for Nokia 3310/3410/... which I can use logomanger to edit and manage my 3410. It works properly. So I suppose it has no problem for communication.

I want to use a flash software to fully backup the firmware. From the posts here, I tried to use both Knok95 and rolis flasher 4.79. However, the software can not find my phone after I push shortly my phone power on.

Can sb. give me a hint for this problem?

Thxxxxxxxxxxxxxxx a lot.

bean

[NokDoc]

Hi,

U have a mbus or mbus/fbus cable, connected to the com port.

For Flashing, U need another sort cable, connected to the lpt port.

NokDoc

[bean]

So, this means, this mbus cable can do nothing to flashing/upgrading my mobile? :sad:

Are there any software be applicable for mbus cable? :-(((

[ldicdican]

So, this means, this mbus cable can do nothing to flashing/upgrading my mobile? :sad:

Are there any software be applicable for mbus cable? :-(((

ABSOLUTELY! you can't do flashing with MBUS/FBUS cables, you should use FLASHER cable which connects to LPT1(Printer port).

1. MBUS/FBUS :
- connects to COM1/COM2/COMx.
- use as data cable, for Logomanager,
Update FAID, Reset UI, SP Locks.

2. FLASHER :
- connects to LPT(Printer port).
- use for flashing firmwares (MCU/PPM/EEPROM).

*after flashing(using flasher cable), you should set FAID,reset ui,etc using MBUS cable.
***THAT MEANS - you will need the 2 different cables on flashing/upgrading your mobile.

Good Luck!

[bean]

Thank you. :)

But I heard it is possible to make myself a convertor from my m/fbus cable to flash cable. Who know how to do it self?

[NokDoc]

Hi,

Well, true but only partially.

U can make Ur own flasher print, 1 chip, 2 resistors and diodes.

All ingredients will cost about €4,-

And use the phone connection plug from the mbus cable.

The layout is in a picture called Dejan Flasher Interface around here at the forum.

Good Luck.

NokDoc

[bean]

Thank you, NokDoc.

That's what I mean. btw, could you explain why it is partially?