to any bady built his owne flash cable

[samer2]

i see much theard talknig about Falsh cable and i download more picture about the subject
But without any explain to know how i can do it
So any help Please

[natnat]

its a schematic diagram!

so you have to build you circuit! then those thing on the left side are the serial (for mbus cable) and the parallel (for flasher cable) cables. you make the circuit first then connect the output of your circuit to the right pins of your cable. then connect the cable to your computer. and the other end (the right side of the schematic diagram) shows the pins for your phone. this schematic is universal so you have to figure out which phone you want. i have a replaceable tip so that i will only replace the tip for the right phone.

[samer2]

thank you very much for replayng me
Now can i ask you some qustion :
1- do i need More than this circuit ( i mean do i need mbus cable)
2- wher i must connect the wire in the right
3- my mobile is 3310
4- thank a lot and sorry for my english
5- i am waiting your replay
6- thank you again

[natnat]

the circuit is all you need.

the right part of the schematic diagram is where you connect your "phone connector". its different depending on what phone your using. since your phone is a 33XX series, it needs only four connections. you need to search the threads for something like "3310 pinouts".

again, the left part is for your computer (parallel port) the right part of the schematic is to be connected to your phone. you can see this when you remove the battery in the back of your phone. there are four circles in a diamond shape formation.

all in all, this is called a "FLASHER CABLE"

[samer2]

Thank you very much i will try to find all pices and try to do it ,
thank you

[samer2]

Hi again :
Sorry but i didn't find this ic can yougive another ic can work with me
thanks

[ldicdican]

Hi again :
Sorry but i didn't find this ic can yougive another ic can work with me
thanks

you can use 74HC04 or 74HC14 for both Flasher and Mbus.....tested 10000% worked! :)

[samer2]

you can use 74HC04 or 74HC14 for both Flasher and Mbus.....tested 10000% worked! :)
thanks for everything

[samer2]

Hi again i made the cable but it is not working i test everything and all connection is ok but no connection with my phone
i used 74ls14 ic so any help please

[ldicdican]

Hi again i made the cable but it is not working i test everything and all connection is ok but no connection with my phone
i used 74ls14 ic so any help please

DON'T USE 74LS14, USE 74HC 14.....it has big difference:
LS = i think is Low-speed
HC = is high-speed communication....

good luck!

[samer2]

DON'T USE 74LS14, USE 74HC 14.....it has big difference:
LS = i think is Low-speed
HC = is high-speed communication....

good luck!

thanks i will try again

[Godleader]

share abit comments ... i found nothing about the IC .. where to find ? mostly this ic where ppl will use ?