Sharp GX20 Unlocker Free and Tested!!!

[Drug_Store]

Download (http://www.unlockeasy.net/Sharp/Software/Santelgx20.zip)

Enjoy

[nahid]

Download (http://www.unlockeasy.net/Sharp/Software/Santelgx20.zip)

Enjoy
thankyou sir......................

[Drug_Store]

That one was a trial version I guess.
Use this one:
Download New Sharp GX All Unlocker (http://download.vilani.com/telefonos/sharp/Sharp_Unlocker_31.zip)

[djmoomin]

anyone tested this yet, gonna test it tonight on my bros and post results later



:)

[djmoomin]

anyone tested this yet, gonna test it tonight on my bros and post results later



:)

[Saf]

Yes i'v tested it..........it works 100%

[geeza2002]

Spot on done 16 of the little buggers!!! easy!

[Gee]

Is there an english version of sharp gx all unlocker

[geeza2002]

Is there an english version of sharp gx all unlocker

Why?
its not difficult to understand?

[Gee]

Why?
its not difficult to understand?


which button unlocks the phone, sorry for being a pain i just dont want to destroy my phone

[Drug_Store]

which button unlocks the phone, sorry for being a pain i just dont want to destroy my phone

I´ll try to explain.

Liberar GX10 -> Unlock GX10
Liberar GX10N -> Unlock GX10n
Liberar GX10i -> Unlock GX10i
Liberar GX20 -> Unlock GX20
Reset Codigo -> Reset Code

Conectar -> Connect
Aplicar Selecion -> Apply Selection
Salir -> Exit

Fabricate -> Builter (manufact.)
Serie -> Model Serie
Modelo -> Model
Version -> Version
IMEI -> IMEI
Codigo -> Code

[Gee]

Thanks Drug Store :smile: :grin:

[Prega]

I´ll try to explain.

Liberar GX10 -> Unlock GX10
Liberar GX10N -> Unlock GX10n
Liberar GX10i -> Unlock GX10i
Liberar GX20 -> Unlock GX20
Reset Codigo -> Reset Code

Conectar -> Connect
Aplicar Selecion -> Apply Selection
Salir -> Exit

Fabricate -> Builter (manufact.)
Serie -> Model Serie
Modelo -> Model
Version -> Version
IMEI -> IMEI
Codigo -> Code

I tried the software on my GX20 and all I have on the screen is " **** ". Can you help ??

[geeza2002]

select connect
it will read phone again
then select aplicar
and it will go through...

[Prega]

That worked out great. Many thanks !!

[mrgsm]

how bout simlock in Gx1 ???

[geeza2002]

use GX-10 earlier version by unlocKing.

[neoki51]

i got the program and no sim card in side of phone. pressed conect and it says error plz help me out

[Saf]

i got the program and no sim card in side of phone. pressed conect and it says error plz help me out

Power on the phone then plug in the cable and press connect on the software..

let me know if u need further help!

Thanks

[neoki51]

Yeh it says error when i do this do i need sim in or out as i tryed both but it didnt work

[Saf]

Should not be a problem with sim out/in as long as the phone is powered on...which software is it your using and is your cable working ok?

Thanks

[courtneybopper]

Where can I get cable from?
Thanks,
B:-opper

[neoki51]

the one from above it aint workin

[Saf]

Post me your e-mail and i'll send u the very first software for GX10 which is working 100% as i'v tried it myself!

[neoki51]

Post me your e-mail and i'll send u the very first software for GX10 which is working 100% as i'v tried it myself!
its a gx 20 i got and its [email protected] but it wont work

[Saf]

Check mail and try the software i have sent you, it may be the same1 but give it a go anyway!

[neoki51]

Check mail and try the software i have sent you, it may be the same1 but give it a go anyway!
i have used it but it dont unlock it just comes up with code on the mobile

[Bryan wilson]

I downloaded the Gx20 unlocking program, and when i open it, it says '' execution remaining for trail - 0 (zero)'' when i select 'try' nothing happens.
I have the right cable and everything. Pls help
Thanx in advance

[Lor]

I downloaded the Gx20 unlocking program, and when i open it, it says '' execution remaining for trail - 0 (zero)'' when i select 'try' nothing happens.
I have the right cable and everything. Pls help
Thanx in advance

plz, help, i have got the same problem as well. its so annoying.
and it also asks for the unluck code & user name.
what shall i do with it?

if any one got the program, would you send to [email protected]

thx a lot

[kevinn13]

Program comes with execution timer if this is set to 0 then you aint going to get it to work.

[minus6(sic)6]

Hi, I dont have any unlocking cables and I was wondering if there is a calculator to get the unlocking code for a GX-10 ? If anyone can help me out it would be greatly appriciated.

Kind Regards,

Minus

[jabranali]

i have a gx10 and ahve a universal unlcok box which had a panasonic g450 cable witch fits the gx10 do they work because wehn i try to connect it won't.

[jabranali]

if anyone has the unlock code generator could you send it to me or get me the codes please. thanks

[kanjer]

would i need a cable for this or can this be done via infra red?

[bungle_uk]

You need serial data cable. You won't unlock ANY phone using infra red :lol:

[n5001]

Download (http://www.unlockeasy.net/Sharp/Software/Santelgx20.zip)

Enjoy


I know you need a cable to use the software but does it matter if its a USB one?

Would appreciate your help.

[leemobile]

I know you need a cable to use the software but does it matter if its a USB one?

Would appreciate your help.

yes it does matter you need to use a com port data cable or mess around with the settings to reconfigure your usb as a lower numbered com port

regards lee :rolleyes:

[danmax]

Hi
I am new to this so bear with me please...
I had my GX20 unlocked at a shop, it has unlocked but about 90% of the time after a call/text or wap the phone locks as in I can't make or recieve calls. the only way to get past it that I have found is to power off the phone then switch it on again but as you can imagine this is a pain.
I downloaded and used the Sharp Unlocker 31 from the forum link and used it as stated but I still have the same problem.
another point I should make is that the screen when viewing messages o contacts has about 5 or 6 lines of............................ at the bottom of the screen
if anyone can help or point me in the right direction of help I would be forever in your debt

Thanks in advanced


Dan :-? :-?

[geeza2002]

Do a factory reset!
its in the main menu
might sort it.
let me know :)

[danmax]

Cheers for the reply
I Flashed it and now have the problem sorted
Cheers anyway

Dan

[-BM-]

The software works just fine used it several times with no problems.

Always use serial for unlocking and flashing for the person asking above!

[cmavr8]

That one was a trial version I guess.
Use this one:
Download New Sharp GX All Unlocker (http://download.vilani.com/telefonos/sharp/Sharp_Unlocker_31.zip)


Hello, I tried downloading the program "Sharp_Unlocker_31.exe" but it says

"Component 'MSCOMM32.OCX' or one of its dependencies not correctly registered: a

file is missing or invalid"

I downloaded it twice.

I have a sharp gx 20, and an MA620 IRDA adapter. I use it for downloading and

uploading videos and photos and sounds. BUt i can't down/up load java appz. I

also can't send or recieve java or photos via irda, directly from/to other

phones. So with this app, I want to unlock both features...


Can you please help me???

thank you very much

[email protected]

[logic700]

I tried the software on my GX20 and all I have on the screen is " **** ". Can you help ??
Have same problem have tried it about 15 times still no change any ideas??

[wmainframe]

hi, i have a sharp GX-10 that requires unlocking. i have got the: Sharp unlocker 3.1 and GX-10 final (which is attached).

i read somewhere that if i use the Sharp unlocker 3.1, i would loose all the photo's stored on the phone because it does a factory reset or something.

does anyone know is this is the same if i was to use GX-10 final (attached), as i don't want to loose all my photo's.

if it will loose the photo's, are there any phone managers that i could download to back my phone up?

thanks in advance,
WM

[ziggy]

:-? hi can any one please help me ive got the vilani software @ the unlocking cable but every time i press unlock , a box appears that says run time error 8002 ,, invalid port number ,,,can any one HELP ME TO CHANGE THE PORT TO THE ONE I NEED THANKS OR IS IT THE SOFTWARE ? :-? :-?

[rosieeee]

[QUOTE=cmavr8]Hello, I tried downloading the program "Sharp_Unlocker_31.exe" but it says

"Component 'MSCOMM32.OCX' or one of its dependencies not correctly registered: a

file is missing or invalid"

I downloaded it twice.





I have the same problem when trying to open this program after downloading it. I am using XP, can anybody help please.

[daice]

Hello, I tried downloading the program "Sharp_Unlocker_31.exe" but it says

"Component 'MSCOMM32.OCX' or one of its dependencies not correctly registered: a

file is missing or invalid"


Hello!

I ain't got that problem :-) But maybe I'm able to help. MSCOMM32.OCX is part of ugly Visual Basic, don't know how it's spread except with Visual Studio. I'm not that into Windows.

Anyway: Download mscomm32.zip (http://www.phaedrusltd.co.uk/Download/mscomm32.zip), unzip and copy it into you windows system directory (something like c:\windows\system\). Go to a command prompt (aka dosbox) and run
regsvr32 c:\windows\system\mscomm32.ocx


Hope this fixes your problem.

daice

[jeremyyu]

That one was a trial version I guess.
Use this one:
Download New Sharp GX All Unlocker (http://download.vilani.com/telefonos/sharp/Sharp_Unlocker_31.zip)


I can't open this file!! Can you help me?

NOT FIND "MSCOMM32.OCX"

[jsg1163]

I can't open this file!! Can you help me?

NOT FIND "MSCOMM32.OCX"


SAME PROBLEM WITH ME...... FILE IS NOT OPENING AND THE OTHER UNLOCKER FOR GX20 HAS EXPIRED.

ANY ONE GOT THE CODE TO REGISTER IT....

HELP WOULD BE APPRICIATED.

[shanekillian]

i have a sharp gx10i and i get asked for the handset code i dont know it. what are the solutions?? i have ordered a cable off the net..... data cable for gx10i ... that'll do it correct???


all help appreciated :rolleyes:

[r_e_n_i_a]

I think this is the right place to ask this if not pls correct me.What is the reason for someone to unlock a phone?I mean what does an unlock offer?And also why people want to change their IMEI?What is this for?Sorry for not helping and just asking but all this stuff confused me (a lot....) :-?

[dj_orbit]

hi can anybody help me i am in desperate help!

i tryed to unlock my mobile with that unlocker sharp gx20 in the process i unpluged the data cable and my mobile went off..... now when i turn my mobile on it stays on a black flashing screen :eek: :cry: any help !?

mail me please

[email protected]

[cmavr8]

start all over again. and do not interupt it this time (make sure that your bat is fully charged)

[shelleeson]

:oops: i tried to unlock my gx20 today with the software recommended and the gx20 won't come back on it just keeps flashng the black screen and the battery is fully charged what shall i do now. i can't get it to switch on at all.

[cmavr8]

:oops: i tried to unlock my gx20 today with the software recommended and the gx20 won't come back on it just keeps flashng the black screen and the battery is fully charged what shall i do now. i can't get it to switch on at all.


Try to flash a new firmware installation over it.

It will get the phone back to life, if it's not dead forever(which I don't think happened)

[shelleeson]

Try to flash a new firmware installation over it.

It will get the phone back to life, if it's not dead forever(which I don't think happened)

:wink: thank you for replying so quickly sorry to be a pain in the you know what but how do i go about doing that? i've also got my phone full of pictures and ringtones so am i going to lose the lot. where do i get the firmware installation-me-bob from. :???: i've got the wrong head on today (worzel gummidge style).

[cmavr8]

first, I have flashed my phone over 10 times, and I didn't need to erase photos/vids/sounds/games/ contacts!

I know that you are burning, and you really want to do ssomething now, but be careful not to do any stupidity.


You can download firmware from my yahoo group downloads:
http://groups.yahoo.com/group/pcnews8/


good luck!

[shelleeson]

i would but i can't get it to work properly every time i try to use it the the sharpdownloaderbeta.exe goes bananas. and the pro.exe doesn't work either and my phones still as dead as a dodo how do i resolve this.

[cmavr8]

i m sorry! I forgot.

You need the unisoft program.

go to http://www.spunlock.com/ and search!

[shelleeson]

i'm not being funny but it would be cheaper to go and take it to be flashed wouldn't it didn't think i would have to pay for a service kit it's not like iam running a production line its just one old phone.

[cmavr8]

as I understand They charge it now! I gave you that link because they gave it for free...

Try to find the prog elsewhere...(for free)

[shelleeson]

if you have the software couldn't you possibly post it onto your yahoo address so that everyone can benefit :roll:

[cmavr8]

It's just too big!!!

[shelleeson]

i used the spunlock software but the message not your day came up so i can assume that my phone can go in the bin now then cause it'll be no use. :evil:

[cmavr8]

I can't understand what you 're saying.

[shelleeson]

i used the spunlock software you suggested and the message that came up after i used it said something along the lines sorry not your day. the phones still dead and won't switch on so what do i do now.

sorry if i type with a dodgey accent that's what you get from coming from the same part of the world as robbie williams.
:lol:

[cmavr8]

what firmware did you try to flash on it?

[shelleeson]

not sure all i do know is its a code reseter and it didn't work.

[cmavr8]

you have to flash a new firmware over the phone, not just try to unlock it!

you dont need an unlocker. you need the full unisoft program. about 60mb

[Mdineen]

@shelleeson
I have the program you need. Only problem is, I have a very very bad connection at the moment. Running on very slow dialup.

I can upload it to a server for you tomorrow and give you the address then if thats any good?

[cmavr8]

do you have username and password for unisoft?

I have lost mine..

[Mdineen]

Posted the link a while ago, but on another thread

Here is the link to the GX20 Repair Tool for anybody who wants it

http://www.thefonedoc.com/GX20_flashrepair.zip

[tatusmaker]

:roll: hi guys :) anybody know any program to instal into the pocket pc to unlock phones whit it?? :confused: :sad:
here a pocket mecanic pretty version.

[Fraz2]

Hi there,

I tried to unlock my GX20, all I got was a diagnostic screen - nothing else. Now my phone wont even power up! Does this mean it's completly goosed? Anyone got any suggestions (other than but another phone !!!) :mad:

[VirusMagic]

I have a problem.
I run the program and choose GX20 and then connectar.
It shows me a message '8005' Port already open.
I have it connected through USB Hub.
I don't know what is the matter.
I need help plz bros.
What is the other things that is written:
Fabricante,Serial,Modelo e.t.c.
Do I have to write these too?How do I find them???

Thnx.
V. :-(

[levent33m]

hi gx 25 sim lock code help plz thanks:eek:

[bcatlock]

hi gx 25 sim lock code help plz thanks:eek:

use search not so long back i posted to unlock this via bluetooth,easy,,,just use the search mate:)

[Schonensma]

Woow,
pretty old posts in here