PDA

View Full Version : 7110 Flash problem



badger
08-08-2002, 04:53 PM
I just flashed a 7110 with v5.01 after it got a bit damp and came up with contact service. The phone now boots up but keeps saying Insert Sim Card. If you can get it to accept the sim then you get a reasonable signal then suddenly Insert Sim Card comes up again. You can sometimes clear this by pressing the red end call button. It is very similar to when my FAID settings were incorrect on my 6210. Has anyone else experienced this problem or got any ideas? Thanks.

paolo
09-08-2002, 01:10 PM
upload the original software of your phone to fix your problem..... then downlaod a full flash of 7110 5.01 to your phone.then update your phone using rolis 1.7

badger
09-08-2002, 01:54 PM
When I upload the software I get the message that "The MCU checksum is incorrect - contact service will be displayed"
I downloaded a full v5.01. I will try Rolis, I think I may have already done this. Thanks.

davejwilly
11-08-2002, 11:33 PM
i have a similar problem with a 7110 i have tried to flash 2 different sw packages to it but it still tries to register on network and then goes contact service. i have checked it with wintesla and it says that there is a problem with mcu and ppm checksums, i dont suppose anybody has got a tried and tested software package have they please. i could have a hardware fault with this phone then again it could still be corrupted software

nase ck
12-08-2002, 03:14 AM
try flash eeprom like vergin eeprom to ur phone..i think ur phone will come a live again.

badger
12-08-2002, 04:55 PM
Can someone please e-mail me the virgin eeprom for the 7110 v5.01. Thanks very much.

davejwilly
12-08-2002, 11:00 PM
can virgin eeproms be flashed with dark flasher the same as ppm and ppu sorry to be a bit thick but never had to flash eeprom`s before

badger
13-08-2002, 08:11 AM
Just program as usual, I think the address is something like 00590000.

funshopper_de
13-08-2002, 12:24 PM
...after flash with 7110 itīs regular.

When you haved Flash your 7110,after flash you got Contact Service try the Handy on Datacabel and use Nokiatool by Jordik 3.01 or 3.21.
Set correctly Imei,clear Simlocks,set new Faid and make a factore reset and your Handy funktionalized 100%.

davejwilly
18-08-2002, 10:52 PM
thanks guys this baby is alive again but when i tried to update faid with eeprom tools it said that there was an error reading mcu or ppm i can`t remember which but i had to use quick faid on knok. that worked and the baby lives again
ps flashed a complete flash with new eeprom as well.
once again thanks for help

badger
19-08-2002, 08:43 AM
This is really odd, if I put a O2 (BTCellnet, GSM900) SIM in the phone it boots no problem. If I put a T-Mobile or Orange (GSM 1800) SIM it does not recognise it and says INSERT SIM CARD. Any ideas what may cause this? Do you think I have a hardware fault? Thanks.

spako
23-09-2002, 12:24 AM
I have the same problem: with some sim cards there is a message "sim card rejected" and with some other everything is ok. What should I do?

paolo
26-09-2002, 12:56 AM
read the fullflash of any 7110 using rolis 478b6 and save it(use only rolis flasher 477 or 478b6) . after having the the fullflash upload it in your cellphone.. then update faid, clear sp locks and change imei. using nokia tool by rolis

spako
30-09-2002, 02:00 PM
Does anyone have the fullflash of Nokia 7110 (read by Rolis flasher)?

01-10-2002, 12:04 AM
:D regards 7110ee+PMM