View Full Version : Unlock Sharp GX10i
FoneEZY
09-11-2003, 06:29 PM
Does anyone know how to unlock GX10i? many thanks!
MobyProject
13-11-2003, 08:21 PM
Does anyone know how to unlock GX10i? many thanks!
Here is a new unlocker buy I've not tested it
PAul
FoneEZY
14-11-2003, 07:34 PM
Thank you very much! I tested on GX10i and 100% work.
Cheers!
FoneEZY :)
sandro22
16-11-2003, 12:27 PM
Thank you very much! I tested on GX10i and 100% work.
Cheers!
FoneEZY :)
FoneEZY with cabel you used .igot usb cabel no work.
FoneEZY
16-11-2003, 04:38 PM
Original Sharp data cable. buy from a vodafone shop for about $50 bucks.
Badbondiboy
11-01-2004, 07:53 PM
The Vilani software doesn't work with the Australian GX10i. Is there anything I can do to make it work or simply flash my phone. It has phone lock and req's me to enter a 4 digit pin.
Vilani "said" it unlocked it, but it didn't.
I have USB cable and the phone IS talking to the software, but... ya.
Please help.
[email protected]
Am yisrael chai
Salami1_1
11-01-2004, 10:38 PM
be carefull with the software for GX10i
it's hard reset and might fuck up your calibration and your reception might become very bad..
WBR
i have a sharp gx10i from sweden.. is it possible to unlock it with the usb cable ? and are there any programs in english u can use?
cmcnamee
26-01-2004, 10:52 PM
how do you unlock a sharp gx10i plse
Villani software works fine to unlock GX10i but use it with serial cable on com port.
msa
EchoLog
02-02-2004, 09:10 PM
I can't find any serial port data cables :/
Any ideas?
pixelhub
25-02-2004, 09:57 PM
when i try to open the sofware i get this error
"System Error &H8007007E (-2147024770). The specified module could not be found."
Help me please.
Hi,
My girlfriend and I recently split and she has moved away with someone else and changed the pin code on my beloved phone. Without trying every possible combination under the sun is there anyway I can use my phone again? I asked somebody at a computer fair and they said it was border line illegal! Why's that?
I have no recollection that its illegal to change a security code.Pin codes for sim are sim dependant and cannot be changed via ANY software. There are some sim readers which are standalone PIC readers, but they are expensive and fiddly to use.
Security on the phone is not a problem, for best results use Vilani 3.1 to reset the code, I would be tempted to do fresh unlock, reset code to 0000 etc. This is of course provided that you legally own the handset!
Hope this helps,
How many times does it have to be stated" USB CABLES WILL NOT UNLOCK YOUR PHONE!!!"
Use USB for data transfer only, Like pics, tones etc.
USE SERIAL ONLY FOR UNLOCKING/FLASHING
Regards
JAC
www.jac-computers.co.uk
cougar_magnum
14-04-2004, 07:07 PM
Cant you simply punch in a code to unlock GX10i? mines locked on vodaphone and i need it to work on O2 what can i do?
There are a few places which claim to do remote unlocking for the GX series, but I have yet to see any which do work. Unlocking is simple enough provided you use the right software and a decent SERIAL port cable.
JAC
www.jac-computers.co.uk
adder
21-04-2004, 04:50 PM
Here is a new unlocker buy I've not tested it
PAul
I have tried to use the unlocker for the sharp GX10i but once I have downloaded the file of the link you gave I can not open it. any ideas y.
help would be greatful.
bobski
02-05-2004, 01:44 PM
when i try to open the sofware i get this error
"System Error &H8007007E (-2147024770). The specified module could not be found."
Help me please.
I had the same problem when i tried running it on my toshiba laptop, which has XP on it. It seems to run on my main PC which is using XP also.
I am confused :-?
games_gurugirl
30-06-2004, 06:23 AM
wat is the unlocker is there a link or a website for the download? pls direct me to it.... :-?
games_gurugirl
30-06-2004, 06:35 AM
anybody have a problem with handset code, try this baby. i thort i was stuck and had to send it back to UK (i live in OZ) but i went to a discussion forum and found this, it truly works :)
full factory reset - clears EVERYTHING
Turn phone OFF
Remove SIM
Put battery back in, but DO NOT TURN ON
1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.
2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.
3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No:
4 Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5 Wait until all the above messages are displayed and then press the top right key.
6 Press the M key (very important). Message should display Diag Param Saving.
7 Press the red key to power down the phone
Default phone code will now be the standard 0000 (as when phone was new)
garuanteed to work, it didnt hurt my phone in any way
How many times does it have to be stated" USB CABLES WILL NOT UNLOCK YOUR PHONE!!!"
Use USB for data transfer only, Like pics, tones etc.
USE SERIAL ONLY FOR UNLOCKING/FLASHING
This as been said many times but I must disagree, I unlocked my gx10i with a usb cable. But a cable that uses an emulator (Prolific Usb-to-Serial Comm Port), you have an usb cable that works like a serial. I unlocked it with Vilani 3.1.
I bought the cable at http://www.celulartuning.com/newshop/catalog/catalog/product_info.php?cPath=218_266&products_id=1098
You can get the driver at my web site http://mptc.no.sapo.pt/pl-2303_driver_installer.exe
thats cool
is it possible with a serial cable to use usb software like the original from sharp?
where can i find one of those adapters?
jm8850
21-07-2004, 02:31 AM
Can any 1 get me a network unlock code for my gx10I also can this be input with out a cable?
Jay
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.