s45i unlock problem

[szergej]

I tried to unlock a s45i, but i didn't manage.

Before it i managed to unlock a c35 with the same cable (original cable).
I've tried ksie2, ksie5.1 and freia.

help me if you can pls.
thx in advance

[AleXmaN]

I tried to unlock a s45i, but i didn't manage.
Before it i managed to unlock a c35 with the same cable (original cable).
Try to describe in detail what do you do!
What type of Flash? SW version?
What error give you Ksie or Freia?
Write hear....

Good luck!

[szergej]

Version: 04
FR/EFR/HR
E6B9 A701 1500
MAP:041222181330
lq3 T9lq12
A000 General
3C20 Setup
2CA0 Network
6357 Battery

when i want to read a log for example, i connect the cable, start the prg, press read log, then power on the phone.
in case of the C35 for example, the prg finds the phone and says phone is powered on (don't remember the exact message, but it finds the phone and does the work) but in case of the s45i it just says bootcode doesn't seem to be running, waiting to power on the phone.

[AleXmaN]

press read log, then power on the phone.
s45i just says bootcode doesn't seem to be running, waiting to power on the phone.
After pressing (on/off) button the phone must stay Swich OFF!
For this, you should push it wery briefly!!!

If i wrong coreckt me !
Good luck!

[szergej]

I pressed the button once and didn't hold it for long, but soon it turned on. So it didn't show the blank screen (as the c35 for example when the prg found the phone)

[AleXmaN]

I pressed the button once and didn't hold it for long, but soon it turned on. So it didn't show the blank screen (as the c35 for example when the prg found the phone)

SO try until it's NOT swich on!!!!!

Second method is Trying to disconnect-connect a cable after pressing
Unlock...and quickly for a moment(millisecond) push (on/off).
Maybe it's needs to push not onse! but until Soft writes Phone is
powered on!

Good luck!

[szergej]

Thanks for the replies, but now i gave the phone away. Got another instead.

But anyways thanks.