7250i restriction code can anyone help?

[rideout]

i need a code to unlock my 7250i that can only b used on orange(uk) my imei number is 351460805438539 also can this mess up my phone if i unlock it i need to b able to use it on vodaphone when i put voda sim card it says enter restriction code

[Protocol]

i need a code to unlock my 7250i that can only b used on orange(uk) my imei number is 351460805438539 also can this mess up my phone if i unlock it i need to b able to use it on vodaphone when i put voda sim card it says enter restriction code

IMEI is '351460805438539'
Type 2
Provider is '23433' (Orange, UK)

#pw+773940203111547+7#

Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

Type the following as instructed:

a. #
b. * three times for “p”
c. * four times for “w”
d. * two times for “+”
e. Type the 15 digit code (Carefully!)
f. * two times for “+”
g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
h. #
Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
Please respond with results.

[Protocol]

i need a code to unlock my 7250i that can only b used on orange(uk) my imei number is 351460805438539 also can this mess up my phone if i unlock it i need to b able to use it on vodaphone when i put voda sim card it says enter restriction code

You should be able to use the phone on the network of choice once unlocked. Only try the code once.

Voice and text messaging will work on any network, but you might have to modify the phone to work with GPRS on another carrier..

Hope this helps!

Cheers!

[rideout]

Thanks For Your Help But When I Entered That Code It Says Unable To Unlock Phone

[Protocol]

Thanks For Your Help But When I Entered That Code It Says Unable To Unlock Phone

It sounds like the only way to handle it now is with a cable and software. Someone has already entered too many codes, I'd say.