PDA

View Full Version : unlocking 8390


nakata
22-11-2003, 06:19 PM
model: nokia 8390
service: rogers at&t
want to switch to: fido
IMEI010093393752847
IF ANYONE KNOW HOW TO UNLOCK THIS PHONE PLZ REPLY THNX
Protocol
22-11-2003, 06:26 PM
model: nokia 8390
service: rogers at&t
want to switch to: fido
IMEI010093393752847
IF ANYONE KNOW HOW TO UNLOCK THIS PHONE PLZ REPLY THNX

IMEI is '010093393752847'
Type 2
Provider is '30272' (Rogers, Cdn)

#pw+789940614771644+7#

Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

Type the following as instructed:

a. #
b. * three times for “p”
c. * four times for “w”
d. * two times for “+”
e. Type the 15 digit code (Carefully!)
f. * two times for “+”
g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
h. #
Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
Please respond with results.
nakata
22-11-2003, 07:03 PM
hey buddy it didnt not work for some reason
nakata
22-11-2003, 07:08 PM
the AMEI is 010093303752847
sorry it was wrong before
Protocol
22-11-2003, 07:14 PM
the AMEI is 010093303752847
sorry it was wrong before

IMEI is '010093303752847'
Type 2
Provider is '30272' (Rogers, Cdn)

Only use codes once.

#pw+717100144523502+7#

Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

Type the following as instructed:

a. #
b. * three times for “p”
c. * four times for “w”
d. * two times for “+”
e. Type the 15 digit code (Carefully!)
f. * two times for “+”
g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
h. #
Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
Please respond with results.
nakata
22-11-2003, 07:27 PM
hey it didnt work
the AMEI code is correct but it didnt work
Protocol
22-11-2003, 07:29 PM
[QUOTE=nakata]hey it didnt work
the AMEI code is correct but it didnt work[/QUOTE

How many codes have you entered into the phone? You only have five tries. Did it say "Code Error" or "Cannot Undo Restriction"???
crashynot
22-11-2003, 09:15 PM
the AMEI is 010093303752847
sorry it was wrong before

Code posted by Protocol
are not correct

#pw+717100144523502+7#
post reply

Sorry about this
My mistake the codes of Protocol
are correct
did not read other posts
nakata
22-11-2003, 09:18 PM
it says cannot undo restriction
crashynot
22-11-2003, 09:20 PM
Sorry to many Wrong codes
you will have to use the cable and sofware method
you only have 5 trys to unlock your fone by code
sorry i cant help you more
Protocol
22-11-2003, 09:25 PM
Code posted by Protocol
are not correct

#pw+717100144523502+7#
post reply

Is that a fact crashy?? what code did I enter in post No. 5 then??

How about this one:
<<<<<IMEI is '010093303752847'
Type 2
Provider is '30272' (Rogers, Cdn)

Only use codes once.

#pw+717100144523502+7#>>>>>>>

Read post five, and then tell me that I generated the wrong code.

The code generated for his first IMEI (as he posted it) is also correct.