PDA

View Full Version : Nokia 6200 Unlock code please



polyvw
26-11-2003, 02:59 AM
Hi, I need help unlocking my ATT USA phone.

The imei is 351509000535679



THANK YOU!!!

I called ATT and they blew me off, said they did not know what an unlock code was and that my t-mobile sim would never work.

polyvw
26-11-2003, 03:05 AM
Hi, I need help unlocking my ATT USA phone.

The imei is 351509000535679



THANK YOU!!!

I called ATT and they blew me off, said they did not know what an unlock code was and that my t-mobile sim would never work.

I dont know what the network code is, it is att usa so it might be this, i saw it on another post

Provider is '310380' (AT&T)

Protocol
26-11-2003, 03:08 AM
I dont know what the network code is, it is att usa so it might be this, i saw it on another post

Provider is '310380' (AT&T)

IMEI is '351509000535679'
Type 2
Provider is '310380' (AT&T, USA)

Only try code once.

#pw+818471740676672+1#

Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

Type the following as instructed:

a. #
b. * three times for “p”
c. * four times for “w”
d. * two times for “+”
e. Type the 15 digit code (Carefully!)
f. * two times for “+”
g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
h. #
Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
Please respond with results.

polyvw
26-11-2003, 03:16 AM
IMEI is '351509000535679'
Type 2
Provider is '310380' (AT&T, USA)

Only try code once.

#pw+818471740676672+1#

Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

Type the following as instructed:

a. #
b. * three times for “p”
c. * four times for “w”
d. * two times for “+”
e. Type the 15 digit code (Carefully!)
f. * two times for “+”
g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
h. #
Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
Please respond with results.


it said code error, I know i entered everything right, i checked it like 3 times, only put in code once, at the end when it says to put in whatever # corresponds to the last # in the unlock code, on the code you said 1 but the last # of the unlock code is 2???

my imei again is 351509000535679

Protocol
26-11-2003, 03:20 AM
it said code error, I know i entered everything right, i checked it like 3 times, only put in code once, at the end when it says to put in whatever # corresponds to the last # in the unlock code, on the code you said 1 but the last # of the unlock code is 2???

my imei again is 351509000535679

Actually, it refers to the "+1"

So, you would enter the #PW+code and then +1#

If you entered it as +2# it will not work. The last digit is "1".

Let me know if this makes since.

Thanks.

polyvw
26-11-2003, 03:22 AM
Actually, it refers to the "+1"

So, you would enter the #PW+code and then +1#

If you entered it as +2# it will not work. The last digit is "1".

Let me know if this makes since.

Thanks.

i did put it in as a +1, didnt work said code error

it is a 6200 npl-3 if that helps?

Protocol
26-11-2003, 03:24 AM
i did put it in as a +1, didnt work said code error

it is a 6200 npl-3 if that helps?

Did you remove the SIM card before you entered the code?

polyvw
26-11-2003, 03:25 AM
Did you remove the SIM card before you entered the code?


yes, this is confusing... :-? :-?

polyvw
26-11-2003, 03:27 AM
yes, this is confusing... :-? :-?


okay, I GOT IT!!!! wooo-hoo THANK YOU!!!!


i think I forgot the #, i am a moron...

THANKS THANKS THANKS

Protocol
26-11-2003, 03:31 AM
yes, this is confusing... :-? :-?

Try this one once more (of course, quite carefully)

#pw+818471740676672+1#

If is says "Code Error" again, try this one:

#pw+398526423667425+7#

Just make sure you read the instructions closely.

The first phone I unlocked gave me a code error because I incorrectly entered the lock digit (+1#).

Don't feel so bad.....

Let me know what happens....

Protocol
26-11-2003, 03:53 AM
okay, I GOT IT!!!! wooo-hoo THANK YOU!!!!


i think I forgot the #, i am a moron...

THANKS THANKS THANKS

You're welcome. Take care....

(I have done that as well.....)