Please explain as I'm lost.

[Selena21]

I just bought the data cable to connect from my pc to my nokia 3310 mobile.This cable has an end to connect to a com port of the pc and the other end of the cable it has a square device smaller than a matchbox ,which on the upper part facing you it has 4 pins coming out and an arrow indicating in the direction of where the cable is entering with the words NKI 3310.On the rear of this device there is a small switch with the letters F and M on each side.Can someone explain how are these used and what are they for? How to connect it to the mobile?
Thanks

[Gokhan_Nokiaz]

mate there must be a plug on the other end of the plug so u can plug it your com port !

[Selena21]

Mate of course there is and it was the only thing I knew how to do as it was simple ,I just plugged it in one of the com port.The trouble is the other end!

[GeeZuZz]

lol.

Remove the battery from the phone. You'll see a little hole, where the 4 pins on the cable is supposed to be connected.

under the 4 pins on the cable, it is two plastic pins sticking out. That is where you are supposed to put the battery.

Then put the battery, with the cable in the phone.

The connetor should be placed under the battery, so the battery sticks a little up.

[Gokhan_Nokiaz]

ok sorry misread lol ;)

[Selena21]

GeeZuZz thanks but what is that switch with F written on one side and M written on the other side?

[Gokhan_Nokiaz]

Mate

F mean's Fbus switch to this mode if u just upload logo's or ringtones but do no unlocking !

M mean's Mbus this mode u can send logo's,ringtones unlock Mbu is more better !

Have a look on this link there is more info http://www.mobiletoyz.co.uk/datacables.htm

[Selena21]

Thanks friends,i'm beginning to understand a little now.

[User32]

There is a lot more to learn from here... ;)