Log in

View Full Version : 8310 Flashing


atlantisbeppe
09-12-2003, 08:55 PM
Hi, guys. Little problem when flashing my 8310....dongle is ok, the sw recognise it, but when I press ON button to start flashing, sw says "TX pin remains low"..........what can it be ?
Thanks in advance
andre128
13-12-2003, 10:09 AM
Hi, guys. Little problem when flashing my 8310....dongle is ok, the sw recognise it, but when I press ON button to start flashing, sw says "TX pin remains low"..........what can it be ?
Thanks in advance


l've this problem before, try to replace other fia then okay(for me)
try it....
atlantisbeppe
14-12-2003, 07:38 PM
Thanks....I'll try as soon as possible
atlantisbeppe
17-12-2003, 08:58 PM
Nothing.....it doesn't work ! It says "After Start TX pin remains low".......I tried to switch TX and MBUS, and the error became "After MBUS Tx pin remains low"......s*** i MUST update that phone....I'm going crazy !
andre128
19-12-2003, 05:26 PM
Nothing.....it doesn't work ! It says "After Start TX pin remains low".......I tried to switch TX and MBUS, and the error became "After MBUS Tx pin remains low"......s*** i MUST update that phone....I'm going crazy !


how many FIA you have replace? sometimes i have replace 5 or 6 FIA file (all download from different site) then okay. cos i've try same nokia 8310 phone but have to use different FIA :-o
atlantisbeppe
20-12-2003, 05:27 PM
I tried about 10 fias, all different. Now I'll try to do another flasher, always the cheap one, but with a different schematic. I hope it will work...
andre128
25-12-2003, 09:55 AM
I tried about 10 fias, all different. Now I'll try to do another flasher, always the cheap one, but with a different schematic. I hope it will work...

try use SMD rework station reflow 8310 PCB then try to flash. :D
atlantisbeppe
02-01-2004, 10:47 PM
Whoa.......fantastic ! PLZ be serious ...... what can I do ? Can you upload your working fia ?
andre128
04-01-2004, 07:28 AM
find on this forum and you can get the latest fia
atlantisbeppe
06-01-2004, 08:35 PM
I find FIAs 3.37 for 8310......i'll try as soon as possible, cause I've broken my flasher, I built a new one but I can't build it because my soldering iron is broken.....s**t......
wwanthony
06-01-2004, 10:24 PM
Hi,
use WinDCT4.
when asked to power on phone plug in your charger and keep it in on mcu and ppm flashing.

step by step guide on my site.