PDA

View Full Version : All TRUE 331x-557 Logo Addresses


NokDoc
22-08-2002, 10:19 PM
Hi,

Same as like the tones now here is where all the Logos are.
(331x-557)

NokDoc
DonaldDuck69
22-08-2002, 11:23 PM
Thx NokDoc

Good work :)
GeeZuZz
22-08-2002, 11:27 PM
it isn't possible to make one for v5.55 too? :)
NokDoc
22-08-2002, 11:49 PM
Hi,

Logo lists for:

nse8-0600
nhm5-0555
nhm5-0547
nhm5-0545
nsm3d- 500
nsm2- 530
nsb6-1215
nsm5- 516
nsm3- 531
nse1-0524
nhm6-0416

Good Luck,

NokDoc
NokDoc
22-08-2002, 11:54 PM
PS,

Not mind the confusing filename please.
It is logos, but tones can also be done.

NokDoc
pedjulino
23-08-2002, 01:01 AM
That is greate NokDoc,thanx for Ur nice job:)

best regards
KodeX
23-08-2002, 02:02 AM
Thx for the research and info NokDoc...
PhreeZ
23-08-2002, 02:16 AM
would you mind doing one for 3390 v7.14?
get the flash at 3390 MCU + PPM (http://nokiafree.org/forums/t5130/s.html)

thanks ;)

the tones would be sweet, too! :D

your help is appreciated
jeffkow18
23-08-2002, 03:27 AM
hi nokdoc:
thanks for the job ,but can u tell us how u did it so that we can do it by ourself then post the result here :rolleyes:
NokDoc
23-08-2002, 04:57 PM
Hi,

Just to stimulate Ur own reversers mind I will not tell U guys yet.

Mr. Tnp stimulated mine, thanks.

But it is quite simple, some little hint:
Is the last addressed ringtone or logo as I listed really the last one?

NokDoc
NokDoc
23-08-2002, 05:00 PM
Btw, Mr. PrheeZ,

The 3390 tone nr 2D and 30 still need to be cutted to the true length!
Sorry I forgot to do again.

NokDoc
pedjulino
23-08-2002, 05:53 PM
Dear NokDoc i need Ur help i am try change startup ringotne in Nokia 5110 but i haven'r right address offsett,please helpme for address i am try change with offset with forum but nothing i have only contact service please say me how i can change startup ringtone in Nokia 5110,:( please.


best regards,

Pedja
PhreeZ
23-08-2002, 08:27 PM
thanks NokDoc!!! :D


The 3390 tone nr 2D and 30 still need to be cutted to the true length! :eek:

time for some hexin' :p
NokDoc
24-08-2002, 02:06 PM
Ok

I will try to explain a bit.

If U have a good look at the bytes just after the last listed logo U can find a table there.

That table has most of the location definitions for all the logos.
So all U need is to find the table, then U have the data U wish.

To find such tables, I will explain by using a tone:

U can do that by finding the start address of a random tone.
Then find the hexstring of that start address+20.0000.

There U should be inside that table.
Now it is easy to find the start and ending of that table.
And now use the table to find all Ur tones and settings.

331x-557 Tone Demo:

find '0002FD51250B', it is at '0011BE08'
So now find '0031BE08'
That is on '0011C19C', Here's the 8 bytes table.
The start of that table is at '0011C0FC' and the end at '0011C2E3'

With a creative mind U can edit and recompile whole blocks, as long as U keep the number and lengths corresponding with the table data and keep within the addressed location.

This way I switched some logos, tones and and now busy on menu structure experimenting.

>> Time for some hexin ;)
Hopefully U can go built Ur own lists from now.

Good Luck.

NokDoc
jeffkow18
24-08-2002, 03:06 PM
NOkDOC:
PLZ tell us more about it because u are explain too blur,plz share with u so u can exchange our exprerience.

As my father always say to me:
"A person have one brain, one body,two hand and two leg,So share ur knowedge to each other,then u can learn from each other"


Sorry for me rudeness:)