Tracid
27-12-2003, 09:26 PM
I wrote this thread,because there are many people,who canīt set their cable into action.
These are te experiences from my 2 week long nervousness:
When i finished my own cable using that simple schematics with 74HC14 IC,i was so happy.I tried it out on my slower/older computer.it didnīt work.I took it to friends,still with no luck.Checked all the parts of the circuit,that was OK.Whatīs the matter?-I thought.I guy from the web(you all know him-but i donīt tell you!) wrote me,how to check the LPT port is OK:- disconnect flasher cable.
- locate on pc LPT pin11
- when sw asks to "press power on",connect this pin to GND(or pc to case)
If flasher sw have no reaction,this mean ,that here are lpt port problem /or malfunction/.In this case try to test port with other cables(printer,norton link cable ...etc) or install new ISA,PCI board with lpt port.
If has reaction,try to connect external power +4...5V to 74HC14(inside cable) pin14,because port sometimes doesnīt supply enough power
I made it all.It has no reaction.When the first week passed,i got an idea from my good friend,my brain :Inside the computer,where the LPT ports cable is connecting to the motherboard,i pulled out the cable and turned about(180 degrees).It has reaction,but my flasher cable still didnīt work.In the 2nd week i was going to buy a new flasher cable from id2.cz .I told myself:Lets try it last time!The connector between flasher cable and phone was from a factory made F/M bus cable.The connections to the phones pins have springs,but one of these didnīt spring.I thought it canīt be the problem and there is contact,but i mistook(F/M bus doesnīt need all the 4 connections,but flasher cable needs)!I repaired it,connected to LPT and phone,launch program,clicked to Read,and...Hej:Itīs a wonder!The percents were going up!!Fortunately i didnīt purchase original flasher cable(itīs expensive)!
and i donīt need any external power!
So,these are the steps if cable donīt works:
1.check the LPT port is OK(pin11 to GND)
2.if no,try to turn about the cable inside the computer.if itīs OK,check cables,connections,reconnect cable,clean the contacts.Be attentive!
3.If still doesnīt work,connect external power.
4.If still doesnīt work,try on friends computer.
5.If works,throw your(not friends!) computer out the window .If doesnīt work,make the same way with cable!
Phone must be switched off!Try to remove SIM card from phone!
I hope i helped a lot!If helped,please let me know!!
Here are 2 pictures:schematics and where to connect external power!
These are te experiences from my 2 week long nervousness:
When i finished my own cable using that simple schematics with 74HC14 IC,i was so happy.I tried it out on my slower/older computer.it didnīt work.I took it to friends,still with no luck.Checked all the parts of the circuit,that was OK.Whatīs the matter?-I thought.I guy from the web(you all know him-but i donīt tell you!) wrote me,how to check the LPT port is OK:- disconnect flasher cable.
- locate on pc LPT pin11
- when sw asks to "press power on",connect this pin to GND(or pc to case)
If flasher sw have no reaction,this mean ,that here are lpt port problem /or malfunction/.In this case try to test port with other cables(printer,norton link cable ...etc) or install new ISA,PCI board with lpt port.
If has reaction,try to connect external power +4...5V to 74HC14(inside cable) pin14,because port sometimes doesnīt supply enough power
I made it all.It has no reaction.When the first week passed,i got an idea from my good friend,my brain :Inside the computer,where the LPT ports cable is connecting to the motherboard,i pulled out the cable and turned about(180 degrees).It has reaction,but my flasher cable still didnīt work.In the 2nd week i was going to buy a new flasher cable from id2.cz .I told myself:Lets try it last time!The connector between flasher cable and phone was from a factory made F/M bus cable.The connections to the phones pins have springs,but one of these didnīt spring.I thought it canīt be the problem and there is contact,but i mistook(F/M bus doesnīt need all the 4 connections,but flasher cable needs)!I repaired it,connected to LPT and phone,launch program,clicked to Read,and...Hej:Itīs a wonder!The percents were going up!!Fortunately i didnīt purchase original flasher cable(itīs expensive)!
and i donīt need any external power!
So,these are the steps if cable donīt works:
1.check the LPT port is OK(pin11 to GND)
2.if no,try to turn about the cable inside the computer.if itīs OK,check cables,connections,reconnect cable,clean the contacts.Be attentive!
3.If still doesnīt work,connect external power.
4.If still doesnīt work,try on friends computer.
5.If works,throw your(not friends!) computer out the window .If doesnīt work,make the same way with cable!
Phone must be switched off!Try to remove SIM card from phone!
I hope i helped a lot!If helped,please let me know!!
Here are 2 pictures:schematics and where to connect external power!