View Full Version : 51xx 2 61xx convertions with key-board change
Hi,
I'm just smoking a cigarette while progging "Project X" and I'm wondering if it's possible to convert a 51xx to 61xx.
A while ago a friend of me had a 61xx with a 51xx key-board, running the 61xx soft. I flashed the 51xx soft to it and it worked.
But it is possible to make this with a 61xx?
greetings from Germany to all my friend @ this forum.
[enzo]
pedjulino
26-08-2002, 07:32 PM
Dear enzo i am now try flashed my Nokia 5110 with 6110 flash and my phone is dead:( U are relly succesfull flashed Ur Nokia 5110,how??
best regards
sagal
26-08-2002, 07:49 PM
From 5110 possible make 6110.This is old method.
Need change flash, eprom! 128K and keyboard.
To pedjulino:
I flashed a 6130 with the 5130 soft. (Don't know what ROM version)
I don't know if it work reverse.
Did you flash the right ROM version to the phone?
I only can say that my method worked.
I flashed it with Dejan, but I think it should work with Rolis, too.
Only problem was FAID, at that time the FAID calc method was unknown. But now the phone is working great.
pedjulino
27-08-2002, 12:18 AM
To enzo:
dear my friend i have Nokia 5110 v5.30 Rom4, i am try flashed with flash 6110 v5.48 Rom and now have CONTACT SERVICE.I don't know how Ur phone work??Please post for me Ur flash for download and eeprom.But i think eeprom not need write sagal??
best regards
phredrik
27-08-2002, 12:25 AM
i tried flashing 6110 to my 5110 now, and got contact service
phredrik
27-08-2002, 12:47 AM
i tried a different 6110 flash, and now i got this message:
SW <-> ASIC
MISMATCH
USE SW FOR
DSP ROM 4
bisdak
27-08-2002, 11:17 AM
maybe der should be a hardware part dat needs to be changed?
bisdak:D
sagal
27-08-2002, 11:35 AM
phredrik
This is "upgrade" method only on ROM4 phone working!
u need change MAD2.
Sagal
phredrik
27-08-2002, 01:25 PM
sagal
i have rom4, and when i try flashing it, i get contact service. do you know how i can get it to work?
sagal
27-08-2002, 01:40 PM
If you phone ROM4 ver. then u need follow partials:
1 correct ROM4 flash for 6110!
2 correct eprom!!!!!
3 keyboard etc.
If u not have, then i send you eprom or flash.
pedjulino
27-08-2002, 01:56 PM
@sagal
How i can correct eeprom?
please send me eeprom for 6110 i need that.
[email protected]
regards
phredrik
27-08-2002, 02:00 PM
i have 6110 5.48 language G. dont know what languages that include though..
I dont have eeprom, if you could be so kind?
Do I really need to change the keyboard, or can i just rearrange the button assignments or so?
sagal
27-08-2002, 02:11 PM
Hi!
Here is send correct 6110 eprom.
U need download u'r language flash for ROM4!
And need change keyboard panel MCU command by reason of.
Sagal
Hi guys!
The phone is not mine. It's from a friend. So I can't send U the Flash file. :(
How can U read/write an EEPROM from the 61xx? I thought it is impossible with the flashercable. Maybe with a prommer or something else. ?
@ phredrik
I don't think that U can change the button assignment, only if you can prog in ARM. (Hope I'm right)
@ Sagal
Whats the difference between the ROM4 from 51xx and 61xx?
More capacity, or what? Please post.
phredrik
SW <-> ASIC
MISMATCH
Whats ASIC?
Thank U friends!
[enzo]
phredrik
27-08-2002, 02:24 PM
@enzo
i have no idea, i just got that error when i tried a rom3 version of 6110.
@sagal
thanks, i will try it, and see what happens. :)
phredrik
27-08-2002, 02:42 PM
arrg.. i need some special equipment to change the eeprom on 5110?
sagal
27-08-2002, 02:51 PM
Guys!
For eprom contents change's need pony prog and for pony circuit!
This is method the best for eprom contents change.
Else:
Beetwen ROM3 and ROM4 diferent on MAD2 have.How waht is diferent concret, i dont know.Only i know how have very diferent and for ROM3 ROM3 flash need etc.etc.
Hakan
27-08-2002, 03:06 PM
Hi
5110 into 6110 eeprom write software and solition ?????
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.