c45 dead completely

[djyash]

please help me my siemens c45 ver31 ba20.....is dead unisiemens professional tool flash only does not work it says bald specified ........please help me to make my c45 alive i need flash file ver31 .am using all34ver2.05...if you have any other software to make my c45 alive please send it to me [email protected]
helppppppppppppppp please


thank in advance
yash

[siewa26]

Hi again.

I see you still hve a problem with C45, something about type of your phone was postet here http://nokiafree.org/forums/t5017/s1c792d13d43f8b7c051300e046ca11c0.html

A can't help you more, mayby try to load this eeprom using UniSoft v4 , my phone did not repered after this, but your mayby yes? Please tell me what is the diffrence beetwin BE20 and not BE20 software in Siemens C45?

BR Siewka

[djyash]

hi my friend

ba20 is the flash hc.....it's the flash model i think..


yash

[siewa26]

So my C45 was also BA20 , becouse when I was flashing All3/4 the flash type was HC489 or something like that. I have in home flases to Uni Siemens Soft from my sister C45, if you need them I can send them to you.

[djyash]

hi my friend
i have format my harddisk but UniSiemens Professional v.4.00 Flash Tool Only says this when i click read flash or when i click anything else:=ie_badld_specified comport doesn't exist.my comport work well i have try it.do use need to enable the the dongleemmu if yes how to use it...please help


thank in advance
yash

[Alinus]

i did not understand all u have said, but if u need to activate dongle emulator do this: open emulator, select open file, and open "emul.kpe". than go to funtion menu and select enable function.
after that the dongle emulator will be ok and u can use the prog.

[siewa26]

try this way:

to enable dongle emulator:

1)go to: DongleEmmu--->emmm---->siemens emulator.exe
2)run it
3)file---->open file--->emul.kpe

it will say "Unable to set a line" - thats O.K. nevermaind just click "OK"

4)Function menu --->enable Emulator

then run Unisoft.

[djyash]

HI thanks for replying my friends
i have download your unisoft ,then i have run the dongle emulator
i have open the emul.kpe,then the program says "Unable to set a line"then i have run unisoft but when i try to read my phone from any comport either comport 1 or 2 it says the same thing:-ie_badld_specified comport...i went at my cousin place also to check on his computer it does the same thing.i don't know do to next.is there any other software i can upload the flash file .bin


thanks in advance
yash

[siewa26]

I have only this from my sister C45 (unfortunlly a do not know the soft ver.):

try to load.

[djyash]

anyway thanks a lot my friends if you know
why the unisoft is not working you let me know .....i don't know how to make my c45 back alive...i will try to upload the .flk file again.

thanks my friend
yash

[Alinus]

ok. first: what cable do u use. second try with winswap or with allsiemens34 2.05. use the same link.

for winswap the original data cable from siemens does not work

[djyash]

Hi Alinus,
thanks for replying ,i think i have original cable, on the cable it written SIE.C3508....AND also i am using all 3/4 service software V2.0.5 cracked by XzZ..but i have problem with it:-

Flash Hc=Ba20
Soft info= ver.ff
Calculating Security data
waiting for calcthread to exit.....then nothing happen it stop here ihave wait for about 25 min.i must press ctrl+alt+del to exit the program....can you help me please my friend


Thanks
yash

[Alinus]

MPORTANT!!! To UNISIEMENS WITH EMULATOR USER

if you work with Unisiemens....please check your LPT Port!
Dont connect another device in LPT PORT.

If you connect another device in LPT, Unisiemens can work properly!

and good luck!

this news not usefully for user work with Unisiemen with donggle

b'cost scanner device, i'm instal windows 5x
i think windows problem..........

[Alinus]

al34 works best on virgin win89se.
but if u were able to run the program - try flashing the phone again. but ckeck the battery - it must be full charged battery.

after flashing use imei writer and map creator to get the phone on. the phone will not work only with flashing

[djyash]

HI again my friends thanks a lot unisiemens work now i have disconnect the printer port...thanks again...

I have take a good c45 and then i took flash and eeprom from it and put into dead one, using UniSoft ,it dosn't help me . the phone is still dead ...i have then run pulic logger 3.00 then upload the map file it say :=eeprom damaged ,what must i do now ...please help me

[Alinus]

ask sixth sense help. he is better than me in siemens. much better.

but first try unlockit with c45 unlocker - to repair the checksums.

[djyash]

anyway thanks alot my friend. my all3/4 is working also i have changed the DEVICE PORT TO LPT2...

i have then run all 3/4 2.0.5 cracked by xzZ i have upload the 3*.*.flx files from this website http://www.odblokgsm.sk/download/
and this also didn't help me ..now when i press power on my c45 phone i have a beep sound that all...

thanks in advance
yash

[Alinus]

as i have said, flahing will not wake up your phone. but if u have this beep, than u can read log and make a map for your phone. and after that i believe ypur phone will be alive:D

[djyash]

Hi alinus thanks for replying my friend...i don't know how to make the map file....if you know how to make it can you do it for me here is my log file...thanks in advance


yash

[Alinus]

sorry, can't make map. i get this message, error in the map file.
but have u been able to flash your phone till u get wrong software? without this i can't generate map.

[djyash]

Hi alinus i haven't been able to get wrong software i have flash the phone more than 20 times i can't get ...i have use mt050 by(yura "crew")-moderator of gsmhack-crew .each time it give me eeprom damaged.but i have upload eeprom.bin also.but when i use siemens c45/mt50 it say successfuly done..what must i do my friend........

thanks in advance
yash

[Alinus]

i must decline mi competence at this time. can not help u no further.

but this does not mean that u can't repair the phone. it just means that I do not know what to do next :(

if here u can't get help, sens me a mail ([email protected]) and i'll give u the adress of another good forum for Siemens

ps.
did u asked for sixth sense help?

[djyash]

Anyway thanks a lot man....i have ask him he told me to do that:-


*** BA20 ***

1. FLash u r C45 with all34 205 with flx files until u r c45
Wrong Software

2. Read with logger 3.0 or 4.0 and make a map (with robot or
hardware dongle) use C45 type

3. Write map to u r phone, select c45 type first to read from u r
map and than change to SL45 type for Write IMEI... OK?

but this also did not help me....

can you send me the address of the another good forum for Siemens
.my email is:- [email protected]

[Alinus]

i have send u a private message. check your mailbox on this forum

[djyash]

ok thanks a lot man....if you have any idea to make my c45 back to life let me know my friends



thanks
yash