View Full Version : mobile 3310 clip not working
i have connected my 3310 to my clip then connected to my m-bus cable but my progs say check cable this only happens with my 3310 i have no problems with the other clips maybe a connection problem
by the way this is one of the best forum for info :D
Alinus
07-03-2004, 01:45 AM
what clip are u talking about?
Spawn Killer
12-03-2004, 12:50 AM
check the pins on the heads has could be the cable end to phone were the pins are damage
FearNoMore
10-06-2004, 06:11 PM
If you are using one of these:
http://nokiafree.org/forums/attachment.php?attachmentid=12600&stc=1
Try to:
1 - Clean the four contacts
2 - See if all the pins are at the same level
3 - Unscrew the four screw and search for bad contacts on solded wires
A comum problem with these is that the use tends to unlevel the pins and then they dont touch the 4 points in the PCB.
It could be also a preloader error but I dont understand enought to give you an advice in this matter.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.