PDA

View Full Version : Sharp Tunning is comming :) :) :)



Crux
18-03-2004, 10:29 PM
Well, today i decrypted the flash of a gx10i. i have it in hex.

I want to know if there is any interested to start "tunning" sharp software just like it was done with nokia dct3, and others.

BTW:
Here you have the decrypted flash: http://www.yeldar.co.uk/crux/Sharp/A02-004-0035-GX10i-DECRYPTED.rar

and here you have some more Sharp Software: http://www.yeldar.co.uk/crux/Sharp/

and here u have ALL SHARP CODES: -- i read it in the flash :)

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER0#) --- Firmware Version

Well, thats it. I'l be waiting for PM of anyone interested in Sharp Tunning.

Post any comments

Crux
19-03-2004, 01:54 AM
here is the first thing i done with this flash?

i just stealed StormyNight game from original sharp firmware.

http://www.yeldar.co.uk/crux/Sharp/StormySight.rar

CAN ANYONE CONFIRM ME WHAT GAMES ARE IN GX20?

djmoomin
24-03-2004, 05:12 PM
just bomblink is in gx20.. how do i upload games to the gx20, couldnt find anything in handset manager...

Crux
24-03-2004, 07:20 PM
just bomblink is in gx20.. how do i upload games to the gx20, couldnt find anything in handset manager...

read this :)

http://nokiafree.org/forums/t58171/h/s.html

JAC
25-03-2004, 12:20 AM
I have it on good authority-(thanks to George) that version flash 0304 GX10 cannot be read or written to as it is "firewalled" inside the firmware.This is believed to be a mistake when they produced the firmware, hence the flashes are not readily available.
I have no more information at the moment, but will endeavour to find out.

Also beware, if using a GX10i flash on a GX10, the internal light will remain on unless you alter the times, or leave the phone open until the internal light goes out, then you can shut it and save your battery.


Regards
JAC

chrisge
07-05-2004, 07:58 PM
and here u have ALL SHARP CODES: -- i read it in the flash :)

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER0#) --- Firmware Version

Well, thats it. I'l be waiting for PM of anyone interested in Sharp Tunning.

Post any comments


Can you please give me some more details about these codes ?
Is the code *01763*NETMODE0# somethink like the netmonitor in Nokia phones ?
What about engineer mode ?

thank you in advance !!!!
:D

JAC
09-05-2004, 07:11 PM
The codes listed are for use by Engineers only, unless you know what you are doing.

This is in no way a dispute about your knowledge, but please only access these if you know what you really are doing.
The Engineer code is for accessing cell properties, call logs etc.
Similar to netmonitor, but different applications. They are used in conjunction with software from a PC, not from just the phone.

Its pretty vague to guess what all these codes do, but I would just stick to the ones you know *#06# etc.

Unless you want to kill your phone then enter them all, some will not work as it depends on your firmware on your phone.

Regards
JAC

chrisge
12-05-2004, 05:56 PM
thanks for your post.
I work for a GSM operator so I guess I know about cell, power, etc.
But if it's coupled with a PC SW I guess I can't do anything.... :evil:

My GX30 is a VODAFONE Live with firmware A15-006-0157-GX30C from 5th of march 2004.

When I make the "netmode enable" code, It makes nothing...

Thanks vodafone.... :-x

red_life
13-05-2004, 09:23 PM
how to unlock Sharp GX30??

alpha4u
02-06-2004, 01:26 PM
okay so far this is handy, i found the unlock menu in

Settings - MEP LOCK * sumthing like tht

anyway i found a way on the net for unlocking but it requires these codes. My opinion is that this isnt worth it because you most likley will need to ring vodefone for these codes or have a cable, which you should be able to unlock using another software. Apart from that i havnt got a cable atm when i buy it i`ll post more details

daice
13-06-2004, 04:24 AM
*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
...


If you want to use these codes on a Sharp TM100, substitute *01763* by *325266*.

"763" from the GX-series means "SOF", probably for "software", in T9. Can anyone imagine what 325266 means (also in T9?).

cu
daice

SmOg
05-07-2004, 01:53 PM
Is there any "vodafone" free firmware for Gx-10i? Thanks to these softs, the infrared and cable communication is very "framed".

cmavr8
28-08-2004, 11:36 PM
Well, today i decrypted the flash of a gx10i. i have it in hex.

I want to know if there is any interested to start "tunning" sharp software just like it was done with nokia dct3, and others.

BTW:
Here you have the decrypted flash: http://www.yeldar.co.uk/crux/Sharp/A02-004-0035-GX10i-DECRYPTED.rar

and here you have some more Sharp Software: http://www.yeldar.co.uk/crux/Sharp/

and here u have ALL SHARP CODES: -- i read it in the flash :)

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER0#) --- Firmware Version

Well, thats it. I'l be waiting for PM of anyone interested in Sharp Tunning.

Post any comments



We should be moving! Maybe we can finally unlock the irda, and java transfer.

I cant get any files... can't you just upload them to something like geocities.com/crux ?

I have gx20, I am willing to help.

thanks

rloolyjr
15-09-2004, 09:00 PM
your links doesnt work.

and let us know when u have a work program for unlock the irda ... i wanna have that

hardmanic
11-10-2004, 03:18 PM
PLz can some one tell me what the status is about the vodaphone software on the Gx30 is there any way to remove it so that we can remove all these restriton with the phone plz help it is driveing me up the wall ahhhhhhhh

ace2005
22-03-2005, 01:40 PM
i was messing with my phone and entered
the enable engineer mode code, tried entering
the disable code but isnt working
Can u please help?

*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode

mr-mobile
23-03-2005, 11:26 PM
ok to get out of engineers mode press top right button and red phone button together m8 ....lmao this will reset handset back to main screen


rob
robtrace4mobiles
uk

DoA_202
29-09-2005, 09:08 AM
We should be moving! Maybe we can finally unlock the irda, and java transfer.

I cant get any files... can't you just upload them to something like geocities.com/crux ?

I have gx20, I am willing to help.

thanks

Is anybody find is it possibly to unlock the irda and java transfer on sharp. if you are, please contanct me.

john_niruban
23-10-2005, 12:08 PM
hey..
i have a sharp tm100 unlocked to tmobile..
can u help me to unlock it..?
please..
i hope u'd reply me to my [email protected]
thanks


Well, today i decrypted the flash of a gx10i. i have it in hex.

I want to know if there is any interested to start "tunning" sharp software just like it was done with nokia dct3, and others.

BTW:
Here you have the decrypted flash: http://www.yeldar.co.uk/crux/Sharp/A02-004-0035-GX10i-DECRYPTED.rar

and here you have some more Sharp Software: http://www.yeldar.co.uk/crux/Sharp/

and here u have ALL SHARP CODES: -- i read it in the flash :)

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER0#) --- Firmware Version

Well, thats it. I'l be waiting for PM of anyone interested in Sharp Tunning.

Post any comments