PDA

View Full Version : Users of Vxxx Gold and C3xx+ advanced unlocking clips can post their Q on this thread



Alinus
24-03-2004, 11:25 AM
any comments regarding those devices, information or else are welcomed in this thread.

djdeathx
24-04-2004, 08:33 AM
Hi
I have a Motorola C330. I have a fully reistered SIM card from a nokia phone. When i transfer it to the C330, it requires a subsidy pass. I know that u need the Advanced Clipper to help me with that problem, but my question is... where can i find this wonderful clip? (Since my question IS regarding the C3XX Clip)

Thanks 4 your time
djDeathx

Alinus
25-04-2004, 11:50 AM
official resseler list can be found at www.alexgsm.ro

Slayerless
29-06-2004, 10:48 AM
I dont know if anyone has similar problems with the v-clip gold. It seems that already it is out of date. I have managed to unlock almost 100 handsets with this thing but all of a sudden it does not want to know. It seems that all V-series handsets have new software and the clip just wont unlock. :evil: :-?

Suggestions??? Before you say anything yes all handsets were fully charged (Thats the fob off my supplier gave) :sad:

Alinus
29-06-2004, 11:00 AM
first of all...write me at [email protected]
let's try to re-write the eeprom content of the clip..maybe it's damaged

also...can you post here or by mail the firmware version (and phone models) you are having troubles with?

thank you

Phonestuff
02-07-2004, 04:18 AM
Well, I just got my v-gold clip... and it was from a Non-Dealer (great...didnt know you needed one) but anyway, here i am....

I got no instructions - 1st mistake....

tried to unlock my v600 - nothing!!! it dont work...
fresh batt in v-clip

(1) full battery in phone
(2) Phone On - plug up phone w/out sim
(3) press button phone suspends - blue led on
(4) lcd powers back on white -
(5) Blue Led blinks like this X_____X-X-X
(6) screen on phone is still white after five secs i reboot phone
(7) enter subsidy password appears when i put sim in from other carrier...

(8) Jump off a very large cliff with bricks tied to my feet.
(with no water below)

sw ver: triplets_g_ob.09.2DR
Su Model: v600
Tech: quad-band gsm
Flex GS9V600AWSTONA0F7 - 1.0.4.2.A

Also Tried On:
SW: triplets_G_0B.09.38R
Flex GI9V600000AA0E9-1.0.0.2.6E

No luck either....

Could Anyone Give Any Direction?
Is It ME??? I Have just run out of things to try!

Please, any help Would Be appreciated...

thanks--->
[email protected]

Phonestuff
02-07-2004, 05:09 AM
now i just unlocked a v300 no problem....
is there an upgrade for this clip?
so it could do the v600's????????

[email protected]

kades
03-07-2004, 10:49 PM
Can I unlock my MOTOROLO V300 using a USB CABLE?

IF YES. How?

THKS!!!

ancapo
05-08-2004, 07:00 AM
Well, I have similar story:

(1) full battery in phone
(2) Phone On - USB cable in phone w/out sim
(3) "Insert SIM" when powered on.
(4) Shut off phone.
(5) Press/holding "*" and "#" while turn on phone
(6) screen on phone is still white after five MINUTES

* 'enter subsidy code' appears when i put sim in from other carrier... But CAN'T GET subsidy code (so far)......

Adding my misery story so's I may get a reply. Thx!

Phonestuff
05-08-2004, 10:19 AM
Well, I have similar story:

(1) full battery in phone
(2) Phone On - USB cable in phone w/out sim
(3) "Insert SIM" when powered on.
(4) Shut off phone.
(5) Press/holding "*" and "#" while turn on phone
(6) screen on phone is still white after five MINUTES

* 'enter subsidy code' appears when i put sim in from other carrier... But CAN'T GET subsidy code (so far)......

Adding my misery story so's I may get a reply. Thx!

Hey!!! I updated my vgold clip with the update and everything works great now... use pony prog and the update for the v-gold and works flawless on all the v-series phones....here, hope this helps......

Alinus
05-08-2004, 10:22 AM
now i just unlocked a v300 no problem....
is there an upgrade for this clip?
so it could do the v600's????????

[email protected]


contact me mate at [email protected]

i will send u latest update (works 100 % on SA V 600)

@ancapo

what firmware version u try to unlock friend?

clifford88
04-04-2005, 10:19 PM
hey is there a code that can be used to unlock the phone with out using my computer like one i can just type on the phone?

Andyman2u
22-06-2005, 08:15 AM
contact me mate at [email protected]

i will send u latest update (works 100 % on SA V 600)

@ancapo

what firmware version u try to unlock friend?

Hi mate

can u send me the latest update for the vclip and is it the 24c128 chip u have to update thanks for any help [email protected]

Regards Andy

Mindo
13-09-2005, 11:59 PM
hi
i have one motorola v1050 of vodafone
and i can't unlock it
i go to unlock in one magazine but he can't unlock :( (he unlock whit imei codes and he can't)

how can i unlock it? i have cable usb for flash or anything
?
thx

cibuco73
14-10-2005, 08:32 PM
Anyone familiar with Unlocking V276? I do have one that I want to activate with another company other than Verizon.

kaska838
25-07-2006, 07:41 PM
hey...can anyone help me to unlock moto L6 plzzzz...thx

6600LIVE
11-04-2007, 09:42 PM
Hi!

Can you help me unlock my V3x?

Thank's a lot!