PDA

View Full Version : T68m --> T68i



Matab
31-03-2004, 08:18 PM
OK i have Div and was wondering if it is possable with it and where i would get all the files needed listed below



Originally Posted by DIV manaul

How to upgrade T68m to T68i

1. Write (upload) GDFS file "T68m_to_T68i_Version2.GDF"
2. Write (upload) Main CPU (AVR) with desired flash (language) from T68i or T68ic
3. Write (upload) Modem flash (ARM) with file from T68i or T68ic. All the time use the file with SAME revision code as used for Main CPU! For example, if you used for Main CPU the file “T68i_EMEA1_R5C001.sbn” you have to use for Modem flash the file “T68i_Modem_R5C001.arm” (in this case the revision code for both files is R5C001). Also, if you used for Main CPU the file “T68ic_HongKong_R2A014.sbn” you have to use for Modem CPU the file “T68ic_Modem_R2A014.arm” (now the revision code was R2A014 for both files).
4. Disconnect phone from cable
5. Press NO (Power) button and keep pressed for 4-5 seconds. Don't panic if phone will not power on immediately!
6. Wait 10-20 seconds until phone will power on (the new flash will initialize phone, and this take some time)

blart
01-04-2004, 01:29 PM
www.cellular-support.com registration is free