newbie needs help

[johnbal1]

hey wot sowftware and hardware do i need to make my 3310 into a 3315 and i have a datacable

[Bomans]

IT is very simple.
-Get an mbus cable.
-Download Nokia_pheonix in free download secion.
Open program set it on 3310.(of course connect your phone to computer en turn it on) THen go to mbus functions and there is function 3310 COnvert to 3315. CLick it and your done.
Now that was very easy, wasn't it ;).
*
OK everybody says you must Upgrade to software versie 5.47 at least.. now ok you can do that.. (see Nok upgrade tut for that)
But i'm very sure I have done it (conversion to 3315) with lower version software.
If I remember correct it was software version 4.45..




IMPORTANT:

Do NOT set factory settings cause this will deactivate the special menu's and you will have 3310 only!


Thx to Salami1_1
http://www.gsm-software.net

[johnbal1]

i cxant find the free downloads section with knock pheonix in it so can sum1 ps post up a link where i can find a fully working nok pheonix program