~~3310 Only Charging~~

[fatihorhan]

I have two 3310 and i can flash them but after flashing is not able to switch them on. If i charge them, its ok. Who can say me the problem???

[Shidoshi]

Hmm...

If you can flash them then you probably don't have a Hardware problem so maybe try to grab a fresh flash file from somewhere?

I had the same problem with a 5510 and is now fixed, and all I did was as I have mentioned here ;)

You sure your screen works?

Regards,
-Dave

[fatihorhan]

I can see on the screen only the charging bar if i charge it. If i try to switch it on its not possible.

Have you got a Full Backup or something like this....I have enough Link where i can get mcu+ppm+eeprom but all of them are the same.


What do you mean with GRAB FRESH FILE???

[Shidoshi]

Hmm...

I mean a brand new file :)
I would send you my own fullbackup but I have lended my 3310 to a cliente for the week :(

But if you say you have tried several links and files and you get the same problem, then maybe... update faid...

What firmware version are you trying to flash?
Have you tried different firmware versions?

Regards,
-Dave

[fatihorhan]

I have done everything

faid updated,
set imei,
clear sp locks

no didnt try another version. and it would wonderfull if you could send me a brand new backup of your 3310.

thanks

[email protected]

[Shidoshi]

Hmm...

Today is your lucky day ;)
I have just bought a 3310 like an hour ago, it's still in the box ;)

Hmm... I bet it's locked to TMN (Very crappy Portuguese network, I only bought it because it was 109e)

I will send it as is and then you may unlock it, just give me a little while ;)

Regards,
-Dave

[Shidoshi]

Hmm...

Nokia 3310 v5.57 Language Pack C (2,048Kb unzipped)

There is english there, so no problem ;)

I will send it to you via E-Mail now.

Cheers,
-Dave

[NLOGOMASTER]

Originally posted by fatihorhan
I can see on the screen only the charging bar if i charge it. If i try to switch it on its not possible.

Have you got a Full Backup or something like this....I have enough Link where i can get mcu+ppm+eeprom but all of them are the same.


What do you mean with GRAB FRESH FILE???

I have same one here,3310 can charge battery,can copy and flash file,but still cant power on,
i tried flashing fresh file but still charging only but cant power on

[Shidoshi]

Hmm...

There couls be a leak somewhere... check the motherboard for faults.

Have these phones been damaged by water or shock?
If so, there could be a fault on the board.

There might be a chance you need to reflow the mobile.

Cheers,
-Dave

[fatihorhan]

I think they were on contact with water. But i never repaired a water-damaged phone.

[Shidoshi]

Hmm...

In that case if you do a little researching here at NFREE you will find the info needed for repairing water-damaged phones ;)

Cheers,
-Dave

[NLOGOMASTER]

mine just went that way,
i think its not software problem,
lookslike hardware problem,any idea???

[jero]

hi...

if you can charge the phone...most of the parts of the phone are healty...it is a kind of hardware problem...and there may be microscopic cracks on the pcb...first check the line of the pwron switch...check if there is a connection from the pwron switch(S419) to R402 and then from R402 to R224...They must be shortcircuit...if they are not connect a wire.... thats all.......

[Shidoshi]

Hmm...


Originally posted by jero
hi...

if you can charge the phone...most of the parts of the phone are healty...it is a kind of hardware problem...and there may be microscopic cracks on the pcb...first check the line of the pwron switch...check if there is a connection from the pwron switch(S419) to R402 and then from R402 to R224...They must be shortcircuit...if they are not connect a wire.... thats all.......

Would you recommend the same procedure for a 3310 that completely discharges a fully charged brand new battery in hmm... 15 minutes?

Thanks,
-Dave

[jero]

to Shidoshi:

for that problem:first you have to be sure if there is some liquid damage on the pcb..specially under the CHAPS,CCONT.....also lift PA(8109)..if they are good check the VBATT line of the pcb..begin from vbatt pad to L513 to C200 etc..in these kind of problems(when there is a disconnected in VBATT line)the phone discharges..and sometimes
you can charge it but when you plug out the charge the display
still shows charging bar...