Hey guys need some help with my 3310.

[Diggiez]

Hi,

I've been surfing the forum now for a while and tried several tips and techniques that you guys gave, but I am still having trouble with flashing/unlocking my 3310.
I have an data cable connected to my Com1 port, and have the switch over on F. Now I have also setup Userport as described. Also looked in the bios.
Now the cable works. I mean I can already get some info about the phone when useing Oxygen Phonemanager 2. I have after that tried several programs such as Knok95, Knok2k3 and Noktool. But they all can't get very far. For example with Knok95, whenever I so something, it says "checksum is 4A8B" and the goes on by saying "Press Power on (if needed)" but the phone is on (in startup saying 'instert sim-card') and then after a while it says 'Cannot prepare Phone'.
So I get stuck.
What am I doing wrong here? Who can please tell me what to do.
Any reponse will be apreciated.

Greetz,

Diggiez

[NokDoc]

Hi,

Knok, reset sp lock.

The stuff u're looking at is meanth to be used with a flasher cable.

Also, set Ur cable to M position, knok will only work in mbus mode.
(f = fbus mode)

NokDoc

[sergo_zmeia]

Listen to NokDic....and go here fore moreinfo:www.ucables.com
and more..go to FAQ..U will learn a lot..
Regards!
Sergo_Zmeia

[416]

to unlock that model you dont need to use a datacable.