PDA

View Full Version : flesh



baraka42
13-09-2002, 10:56 AM
thank wfc.

i can understand hardware fault in gsm. but nothing with software

i have some dead 3310 waterdamege and other reason dead.

nodisplay-no charging-no power on- just dead phone

i have m/bus & f/bus both cable . pls explain me step by step

how can i check 3310 [ and other model ]

pls. tell me which all sw i need to repaire nokia DCT_3 &

DCT-4 and from where i can download it 100% working.

sorry for my english.

thanks in advance

baraka42

[email protected]

wfc
15-09-2002, 12:15 PM
Acutal diagnoeses can be quite hard with out some very expensive equipment.
what i would do is get a flashing cable and try putting some new software on to these phones. you can find out how to do this by looking in the general discussion area:)
you will need the programs
rolis 4.78
eeprom tools 3.1 to start you off
and a flash file as well

wfc
15-09-2002, 12:16 PM
StuffRequired : nokia fls file, eeprom tools (b-phreaks), nokia-flash-tool
or Rolis4.77, Flash cable and data cable.

1. Place all files you require to desktop (only useable with Window Me &
Windows 98)

2. Now run nokia-flash-tool. (USING FLASHER
LEAD, that's the one in the LPT port.)

3. select 3310 from dropdown list

4. click 'Flash' menu and click 'read'. Start address is 200000 end address
is 400000

5. click ok and let it read the phone (backup the flash in your phone)

6. when backed up (read) take out the battery and
replace it.

7. now go to 'Flash' menu and click 'Write'

8. point it to the directory where the MCU & PPM file is
(******.fls) This will be the file you have downloaded.

9. Now once this has been flashed in to the phone close nokia-flash-tool
and switch the phone on

10. Now connect the flash end to the Data Cable (That's the one in the com
port) and leave the phone switched on

11. Run B-phreaks eeprom tools

12. click the button with a magnifiying glass on it and it will update the
FAiD (You do this so that the phone can get a
reception)

13. The phone will restart, now click the paddlock button and the phone will
then restart (this will reset the locks on the handset to factory default,
so its unlocked again without having to use crap partials or flash leads)

14. Hey presto the phone has been unlocked and upgraded to version 5.**
with the language pack ( A or B or C or what ever MCU/PPM you downloaded)

MOBWHIZHEAD
25-09-2002, 05:15 PM
Have I look at this site it have every thing you need including info step by step www.cubwolf.co.uk

This I how I learnt and now I tech peeps on a daily basis,

any probs PM me.

Nick

baraka42
01-10-2002, 07:35 PM
thank you very much wfc,

i think by this i can do it. letter i will tell you. what i had cook

with it.

thanks again.

lol

[email protected]

:mad: :confused: :( :eek: :cool: :) ::D