3330 serious troubles

[newbs]

I was messing around with my 3330 flashing different software versions/ changing the fonts etc anyway I used the reset factory settings in Knok which cause my snakes and space impact games not to work... so i tried reflashing and they still wouldntt work. I then tried using the reset factory settings in eeprom tools and now all i get is a blank screen when the phone is turned on. I have tried reflashing the full original file back onto the phone but this seems to do nothing (even a virgin eeprom).

How can i reset the phone back to how it was? when you reset the factory setting, where does it save them?

cheers

[kid_rock]

run Knok Build 22. Turn the phone on. Use this to 'Quick Set FAID' and 'Reset SP Locks'

[newbs]

Will that definatly fix it? I cant actually get eeprom tools or knok to read the phone, they both say the phone isnt connected when i know 100000% that it is! (and dont tell me to check the cable cause its fine :D)

Ive tried reflashing again but no change :(

[ASTRAL99]

Have you BACKUP FIRST before you do the JOB ???

If does..thank's GOD...flash back again the file
Use Rolis 47 then Set IMEI, Clear SP LOCK, SetFAID, Reset Software with ROLIS 1.8 this mostly work in my case...

Try it...

But if u not BACKUP ur PHONE FIRST...

I Dunno....you have to find

3330 ORIGINAL MCU_PPM_PMM_EEPROM

The problem is Who's gonna give u PMM_EEPROM...??? MCU_PPM maybe....
but PMM_EEPROM...?

[newbs]

thanks for your reply, but flashing the phone does nothing! i have flashed the full flash and everything but the screen is still blank and doesnt respond (to turn it off i have to disconnect battery)

It doesnt respond to data cable so i cant reset faid or anything :(

ANYONE WITH ANY IDEAS PLEASE!

[Svangsta]

maybe you've got a bad flashfile.. try some more files

[newbs]

ive tried at least 5 different versions of software as well as virgin eeproms. It cant be that

i think its screwed :(

[ASTRAL99]

Here...just a NOTE...

If u read the flash from ur phone ie. with ROLIS, then if after done there's msg that tell you Something like
"Your File..bla bla bla....it will be contact service when you flash back to ur phone"

it means your HARDWARE is okay but the flash is damage or corrupt. But if there's no FiLE even you read or write the flash, then the HARDWARE is damage...

In your case your problem is not Hardware(PHONE), but i think you must try different flasher cable or try to look at THE FLASHER PROGRAM settings that u use...
If not solve....well try to look at NOKIA SERVICE CENTRE near you...he..he..he....
(Before u do that, try to FLASH Blank FLASH file) with no IMEI, SEC CODE etc....

I'm glad to help you if you live in same country with me....
:grin: