3315 Lock to GSM only

[bulat]

i have a 3315 that only locks to GSM. Meaning its a single band.
Can i just reflash it or is it hardware problem?

[deadspot]

no its dual band....900/1800 Mhz designed for GSM only not CDMA
5110 single band and others (older phones)

[bulat]

hi there

i know this phne is a dualband but im just asking if there is any way i can fix it becoz now it recognize only single band.

Now running on GSM, but not PCN

[bulat]

Im a bit F*** up here.

I tried to flash the phone using another 3315 flash.
Im using Rolis and it stops after Erasing Flash...
Now i cannot switch on thephone!

The error is "Flashing Erasing Error".....and so on...

Whats the problem here?

What software that can just ERASE flash without flashing a new one?

[crashynot]

you will need to Flash your PHONE WITH A CLEAN Flash file
and then do a FULL Factory RESET
so it will work 100%

[bulat]

hi there

i think the problem im having is that, i cannot erase the existing flash in the phone. i have to erase then i can flash a new one.

[crashynot]

But if you have a Clean Full flash file
it will erase
and you have to check the contacts on the fone and cable
and it will work 100%

[bulat]

Now the phone is ok after i flashed it, but still only recognize GSM900.
I think something wrong with the hardware

[crashynot]

You will need to activate GSM 1800
but usualy after flashing and up dateing faid it will be ok
just try updateing faid 2 or 3 time again

[deadspot]

@bulat

how do u know ur operating 900 Mhz????may be ur service provider only operates single band in ur area.....

[bulat]

@bulat

how do u know ur operating 900 Mhz????may be ur service provider only operates single band in ur area.....


Hi there

I think im very well sure of what i am doing, if not, i would not post it here.
Anyway, i have tried all networks and only GSM900 works. I go manually search for networks, only found 2 GSM900 service providers.

[bulat]

You will need to activate GSM 1800
but usualy after flashing and up dateing faid it will be ok
just try updateing faid 2 or 3 time again


done that, still cannot. IC bad?