Change language 3330

[Sebbe]

Hello,

I have a 3330, I bought him in another country. But the language I need is not in it. I know there is a way to change it, but I don't know how. I have a datacable.

Can someone explain me how to do it and what do I need.

Thanks!!

[steve2097]

Hello Sebbe,

To do this you need a FLASH cable which cost about £15.
You will need to download the mcu and ppm from http://www.gengheraenga.net For the 3330 with your version (You will need to signup).
Then flash the file to your phone, clear sp locks and update FAID.

Steve

[Sebbe]

Hello,

Thanks for helping me, but what you tell is chinese for me. I have a datakabel, is there a difference with a flashkabel???
Could you tell me step by step how to do it and wich software I need.

Thanks!

[Svangsta]

a flashcable is a total diffrent cable then an datacable..

You'll need to buy a flashcable or otherwhise it won't work..
The software that you'll need:
- a program to flash your files, for example rolis v.4.77
- you'll need knock-phoenix
- flashfiles... as told a ppm and a mcu file.. go to the above site and download the flashfile wich you want... The flashfiles are all diffrent if it is about the languages. Try and search the form to find out in wich flashfile your language is.
When you got all the files and software you open rolis. You open the mcu you need and flash it with the flashcable to your phone. The startadress of your mcu is 200000. After that you are going to flash the ppm file wich start at 340000. After you done that you shut down the program and open Knock-phoenix. Connect your phone to you m-bus cable(datacable). And then you go to phone settings and recalculate the faid. After that reset the sp locks and set your emei to orginal..

I hope this wil help you a little bit.

regards Svangsta